Microsoft Access
i am trying to create a microsoft access based website. i have found that for simple access database, you can only view records with an asp page. but cannot insert.
is there any way about this?
ADVERTISEMENT
[Microsoft][ODBC Microsoft Access Driver] Cannot Update. Database Or Object Is Read-o
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
I keep getting this error message when im adding a new record to my database.
Here is my code: ....
[Microsoft][ODBC Microsoft Access Driver] System Resource Exceeded.
i m trying to coneect to a access database Using DSN , but when i try to connect i get an error
Microsoft OLE DB Provider for ODBC Drivers error '8007000e'
[Microsoft][ODBC Microsoft Access Driver] System resource exceeded.
Error:[Microsoft][ODBC Microsoft Access Driver] Too Few Parameters. Expected 2.
I am trying to peform a multiple deletion of records from a single table "Stockist"
I i keep getting the following Error and can't see where i am going wrong. Can anyone help?
Microsoft OLE DB Provider for ODBC Driverserror '80040e10'
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
/RetailerStockProductRemove.asp, line 22
The code i have used is as follows:
Error :: [Microsoft][ODBC Microsoft Access Driver] Not A Valid Bookmark.
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
Error :: [Microsoft][ODBC Microsoft Access Driver] Missing Semicolon ( ; )
this small bit of SQL:
SQL_EditNews = "INSERT INTO tblNews (newsBody) VALUES ('" & editedNews & "') WHERE newsID=63"
Is there something wrong with this statement? When i try to execute it, i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Missing semicolon ( ; ) at end of SQL statement.
/edit_news_03.asp, line 19
[Microsoft][ODBC Microsoft Access Driver]General Error Unable To Open Registry
I am urgently finding a set of codes to write data into a form and the data will go to my database. However i have tried a lot of form but couldn't successfully process. Below is one of my problem...
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x9a8 Thread 0xa08 DBC 0x3041e1c Jet'.
Error :: [Microsoft][ODBC Microsoft Access Driver] Syntax Error In INSERT INTO Statement
I have this insert statement where instruction field in the DB is a memo field.
SQL="INSERT INTO int ([instruction]) VALUES " & _
"('"&Request.Form("myTextarea")&"')"
objConn.Execute(SQL)
Its giving me error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
ASP & Microsoft Access Connection
I have an asp page with a form. I want the add the values to a Microsoft Access table. The name of the table is "seminars" and the fields are "company, phone, email, etc.". How i can create a connection from asp page to the Microsoft Access database?
View Replies View RelatedMicrosoft Access Error Message
I am using a data entry program and when I enter records on a certain form,
I get the following error message when I enter data in to an Access 2000 database:
************
Microsoft JET Database Engine error '80004005'
Cannot open any more tables.
/m3cat/metd_edit.asp, line 1911
************
Any suggestions on how I can solve this problem?
I have been told my the people that created this program that they don't know what the problem is and I am "on my own" for fixing it. I have no experience with ASP and need this problem fixed.
Reserved Words In Microsoft Access
I've noticed several posts where people were having trouble accessing an Access Database. In the vast majority of these cases, the problem was the use of a Reserved Word as a database field name. The following are links to KB Articles listing Reserved Words for Access 97 and Access 2002:
Access 97: http://support.microsoft.com/kb/q109312/
Access 2002: http://support.microsoft.com/kb/q286335/
If you are having trouble with a SQL Statement, and you are fairly certain there is nothing wrong with your statement, check your field names against this list. Using Reserved Words as field names, while not prohibited, is never a good idea.
For example, if you have a field where you want to put someone's name, "Name" is a Reserved Word. A better choice would be something like "UserName" or "PatientsName"; something that identifies the field but doesn't use a Reserved Word.
Unable To Download Microsoft Access Database From Server To My Machine
I recently built an application using an Access database. The application works fine, but for some reason I am unable to FTP the database file back to my machine from the server... the operation simply times out halfway into the transfer.
Has anyone ever encountered this issue? I don't know if maybe some renegade connection wasn't closed, but I kinda doubt that's the case.
Is there even a way I can check what connections to the DB are open?
ASP Attempting To Access MS Access 2000 On File Share
I have a Development server that is running Win2k, IIS 5.0, and ASP enabled. I am trying to gain access to an Access 2000 DB located on a file server within my domain. I'm pretty sure I have all the correct permissions set, but I am having problems when trying to access the DB.
The error is similar to:
The Microsoft Jet Database engine cannot open the file '******'. It is already opened exclusively by another user, or you need permission to view its data.
I'm looking for ways to fix this... Microsoft suggests turning off the ability for IIS to sync passwords. Unfortunately, this is not a viable solution for me.
Is it possible to create a new virtual server that is a share to my file server? Put my ASP and MDB file in there and have it work? Anyone have any other ideas?
Microsoft Agents In ASP !
Any body knows how to include microsoft agents in an ASP page????
View Replies View RelatedMicrosoft.XMLHTTP
I've been searching everywhere online to find an alternative method besides
using Microsoft.XMLHTTP (as it freezes the server up alot!!) but with no luck
at all.
I am using server side ASP, and some said to use Microsoft.ServerXMLHTTP
instead. However I have tried that as well and it still freezes up the whole
thing (i.e. the site just keeps loading forever).
I tried to do a "on error resume next" clause to catch the error but still
doesn't stop the page being freezing up.. :(
I saw someone here said don't use XMLHTTP in ASP as it is not thread safe
(is that why it is freezing up??), and suggest to use
MSXML2.ServerXMLHTTP.3.0.
so do anyone know if MSXML2.ServerXMLHTTP.3.0 will help? i.e. not freezing
up the page?
Microsoft OLE DB Provider
I keep getting this error
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80040E07)
Syntax error converting datetime from character string.
for the following
Code:
inserting="insert into rental (cust_num, item_sku,rental_date,return_date) VALUES ('"&session("cust_num")&"', '"&rs.fields("item_sku")&"','"&now()&"','"&now()+3&"') "
How can I solve it??
Microsoft VBScript
I got the script somewhere online and I'm getting this error message everytime I do certain search.
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'HTMLEncode'
/SimpleSearch.asp, line 265
and this is the line
Response.Write (" <I>" & _
Server.HTMLEncode(queryRS("characterization")) & "</i><br>" & vbCRLF)
Response.Write(" <a href=""" & queryRS("vpath") & """>" & _
filename & "</a>" & vbCRLF)
Microsoft JET Database
I have my website hosted on an asp hosting service and when I use it
I get the following error:
Microsoft JET Database Engine error '80004005'
Operation must use an updateable query.
Microsoft Script
I installed the Microsoft Script Debugger and set the "Enable Script Debug" flag on in IIS. Also, I made sure that the "Disable Script Debug" flag was off in Internet Explorer. Everything ran fine for about two months; the Debugger was getting control. Then, all of a sudden, it has stopped getting control.
I checked the settings above and they still OK. Anybody can tell me why the Debugger is not getting control? Should I report this to Microsoft as a problem?
Microsoft OLE DB Provider
Can you tell me what this error means? And maybe how to resolve it? Code:
SELECT * FROM mms_tbl_membershipType WHERE ID = 3
Microsoft OLE DB Provider for SQL Server error '80040e14'
Line 1: Incorrect syntax near '='.
/home/_register_2.asp, line 80
Microsoft.XMLDom
How can I select a comment node using selectSingleNode, sendo que selectSingleNode("#comment") don't works?
View Replies View RelatedMicrosoft OLE DB Provider
Can someone please tell why I am getting this error? I have the primary key field as text field, and allow zero length=yes, and when I try to submit the form, I get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e2f'
[Microsoft][ODBC Microsoft Access Driver] Index or primary key cannot contain a Null value.
Is it because the ODBC connection is not set properly? or the problem is in the database?
Microsoft OLE DB Error
We 'd used ASP with Windows 2000 server, IIS 5 and MySQL database. Everything was perfect. But we migrated the server to Windows 2003 with IIS 6. Now it's not accepting the ODBC Connectivity. It's saying
Microsoft OLE DB Provider for ODBC Drivers Error '80004005'
in database open statement. (Using ADODB Connectivity)
The strange thing is, While running from the server maching it's accepting the line and running fine. While running from the client machine, we are getting the above error.
Microsoft.Net Framework SDK
I recently installed Microsoft.Net Framework SDK on my W2000 server because I wanted to run some ASP.NET Application, now I can run aspx pages from my IIS5.0 but classic ASP pages doesn't run anymore and most of my WEB- sides are created on ASP. What can I Do to get both Classic ASP and .NET applications to work on the same Server?
View Replies View RelatedOT - Microsoft Using Linux
In the latest issue of The Register (my favourite online newsletter), there's a story (see URL below) about Microsoft using Linux temporarily, for their microsoft.com website because of DDoS attacks and security vuln's.
I know this is OT, and I apologise, I just find it rather amusing. (considering Microsoft is one of the head's of the TCPA (Trusted Computer Protection Agency, aka TCG (Trusted Computing Group), amongst others), who's goals are to basically, get rid of Open Source etc etc).
Microsoft OLE DB Provider
I have tried to create a stored proc in SQl server.The query is like this: CREATE PROCEDURE sp_GetMemberList (@spstr_condn varChar(255)) AS SELECT * FROM tbl_member order by @spstr_condn . But an error was generated.
Microsoft OLE DB Provider for SQL Server (0x80040E14)
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
Microsoft Interdev 6.0
Im trying to set up a Master mode development environment using Microsoft Visual Interdev 6.0. When asked for the IIS server, Im trying to connect to Server 2003, I get cannot locate server error. I try using the IP address also which doesnt work.
When I specified an IIS 5.0 server Interdev is able to locate this, s this a setting somewhere in IIS 6.0.
Microsoft.XMLHTTP
why this ASP code isn't workng, I have the following page (one.asp),
Code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>
Test
</title>
</head>
<body>
<div>
é á í ó ú Ç » ¢
</div>
</body>
</html>
ASP + Access Question (Determining The Last Id Generated By Access)
I'm working on a site that inserts records into an Access database and Access assigns an auto-incrementing id for the record. How can I quickly figure out what id that was just created? I seem to remember there being a function for this....
View Replies View RelatedMicrosoft Jet Database Error
In all likely-hood this is a very easy fix, but I have been working on this site all day and am a bit burnt.
This is for a search page and I am getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E07)
Data type mismatch in criteria expression.
/Itec4477/MyProject/searchIt.asp, line 63
From this code:
Microsoft SQL Char Length
I previously had a post on a problem with the Microsoft SQL server, when I was trying to compare a record in the database with an inputed record, if the record in the database was not exactly the same length as the inputed record, it would not match. i.e. user codes = OAK,BRANT,QUYOU etc.
Unfortunately these records have already been made and they vary in length from 2-5 characters. Im programming in VBscript, does anyone know any functions which will rectify this problem?
i've tried the trim function but this has no effect, I could just change the length of the column so that they are all a similar length and thus will all be comparable, however this is certainly not ideal as an id code only two characters long is not unique, some of the records will clash.
I would like to avoid changing all the records as there are 25 different codes for about 10,000 records. im sure there is some code which could accomplish this but ideally I would like to solve the problem at source.
Opening Microsoft Outlook
I have a Windows 2003 server running IIS 6. On the server I have about 100 websites. I want to place a file on the server and have ALL sites include it on a web page(s). I tried this
<!-- #include file="C: est.inc" --> but it comes back File can't be found.
Microsoft Script Debuggers
I've deployed a big and complicated ASP web application on different
web server, all of them installed with Win 2000 Advanced Server SP3.
I'm completly sure that my web application has no asp errors, but
randomly and sometimes on one of these server Microsoft Script Debugger
opens without an error inside.
In that moment there are no error because the IIS is not blocked as
when a asp error is shown inside Microsoft Script Debugger.