Requested Control Not Valid
When I'm trying to start the smtp virtual server the status of the smtp server is showing 'the requested Control is not valid for this service'
Its state is shown as unknown.Wat ay be the reason.
The messages I'm sending is going to the pick up directory from there its not taking
View Replies
ADVERTISEMENT
I would like to be able to control an asp text box control's name attribute.
I know i can manually type the whole string
<input type="text" name="username" value="" />
but then i can't use the validation control on the inputs. [free javascript ]
PHP Code:
View Replies
View Related
Is this sql statement valid?
strQ = "SELECT *"
strQ = strQ & " FROM Receipt"
strQ = strQ & " WHERE Receipt.Expense ='Inventory' AND Receipt.ReceiptDate Between #1/1/2005# And #12/31/2005#"
strQ = strQ & " ORDER BY Receipt.ReceiptDate"
What I like it to do is select all references to "Inventory" under the field Expense for the entire year of 2005, with the results sorted by date ascending.
View Replies
View Related
i downloaded soem code that is a way to view a MS access db with asp. The error I get is Not a valid file name. Microsoft JET Database Engine error '80004005' . I know it might not be enough information, but anyone have any clues? Code:
View Replies
View Related
If you use ASP.NET you can still make valid xhtml code right? Becuase Visual Studio .NET 2003 doesn't care if it's <br> or <br /> thats bad in my opinion =) You know if Whidbey will make better xhtml?
View Replies
View Related
The field name 'articleid', which is an identity/primary key , is not being recognized in my recordset as I get an " Item cannot be found in the collection corresponding to the requested name or ordinal" error with the following- the line number that the error message points to is on my response.write for the rsid("articleID") :
dim sqlid,rsid
sqlid = "SELECT max(ArticleID) from tblarticles"
Set rsid = Server.CreateObject("ADODB.Recordset")
rsid.Open sqlid,sqlc,3
response.write rsid("ArticleID")
View Replies
View Related
I'm using a ACCESS database that has a databasepassword. In the connection string I'll provide the password as follows:
MM_test_STRING = "dsn=test;pwd=test;"
This works fine on IIS 5 but on IIS 6 on Windows Server 2003 I'll get the
followwing error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid password.
When I'll remove the password the DSN works fine also.
View Replies
View Related
I want to use validation with my ASP script before i add a new record to the database.
Code:
if UserID = "" then Response.redirect("login.asp?login=createnameEMPTY")
so far it only checks that the field is empty- how would i also check that the field is just letters and numbers or if the email field is valid?
View Replies
View Related
Is this a valid name for a session variable:
Session("mySessionName:$SO")
If so, does the " :$SO " mean anything special? I'm going through a web application written by somebody else (who I don't have contact with...) and it's littlered with these types of session variables.
View Replies
View Related
I have one asp page in which i ask the user to enter the path. This then transfers the control to next asp page. In the next page i want to check whether the path is valid or not. I know there are methods of FileSystemObject like DriveExists, FolderExists and FileExists but these has to be used individually.
Suppose the user enters the path as "D:" then i should use DriveExists
and if the user enter the path as "D:/test" the i should use FolderExists
i.e i have to use individual functions. How to check this using one function only
Another problem is that i want to display the message on the page for some seconds and then the control should transfer to next page. How do i go about it.
View Replies
View Related
I use the following code to chck for a working url. It does work for some, but sites that seem to be written in PHP, and google, seem to return a "fail" - I can't figure out how to get p-ast this.
Dim objHTTP
Dim sHTML
Set objHTTP = Server.CreateObject ("Microsoft.XMLHTTP")
objHTTP.open "GET", strURL, False
objHTTP.send
sHTML=objHTTP.statusText
if err or sHTML<>"OK" Then
sTxt="fail"
else
sTxt="ok"
End if
Set objHTTP=nothing
else
sTxt="fail"
End if
View Replies
View Related
Say I retrieve and e-mail adress from a form like this, then I know how to check that it's not empty, contain numbers etc. but I don't know how to check that the e-mail complies with some kind of regular expression or the like.
Therefore I wonder if you have any good e-mail form validation code that can be used on the server side (comparable to Java Script reg.exp on the client side).
<%
Dim mail
mail = request.form("email")
IF mail = "" or mail does not complain with some kind of reg. exp THEN
some code....
End IF
View Replies
View Related
Please help me out. I am looking to filter records to a specific day. Here is my error:
ADODB.Field error '80020009'
Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record./calmenu.asp, line 0
<code>
<%
objRS.Filter = "eventdate = 1"
If IsNull(eventcaption) Then
eventcaption = ""
Else
Response.Write(objRS("eventcaption"))
objRS.Movenext
objRS.Filter = adFilterNone
End If
%>
</code>
View Replies
View Related
Is there a way to get the last requested page from the server?I created a custom 404 asp and would like idealy to log the broken link. I would settle for the page that the link was on. Is there a way to get this information?
View Replies
View Related
Anyone come across this error before? Its responding to <%=rs("FIRM")%>, but I have it declared in a sql statement in the code. Any ideas? Code:
<%
Set cst = Server.CreateObject ("ADODB.Connection")
Set RS = Server.CreateObject ("ADODB.Recordset")
DBpath = server.MapPath("../../../NHITADATABASE2.mdb")
strConn = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & DBpath & ";"
cst.Open strConn
mysql = "SELECT lname, fname, email, firm, import_pro, export_pro, title, city, st, email, regions, country, website, address1, address2, zip, languages, product_service_description FROM NHITAmembership"
'Set rs = MyConn.Execute(mysql)
%>
View Replies
View Related
I've just upgraded our intranet server (production) from Win2K to Win2K3. After the upgrade asp works fine on the root and lower level directories, but any virtual directory returns http: 500- The requested resource is in use. I have caching enabled on all webs.
View Replies
View Related
IIS 5.0 is throwing out "The requested resource is in use." for any site that uses ASP - HTMl is executing fine. I have tried re-installing scripting, latest MDAC, and all my hotfixes are up to date. This just happened after the latest hotfixes were install this week.
I have also tried re-syncing the IWAM account but that didn't work either... Running the webs in HIGH (isolated) did not help either. I hit ASPFAQ.com and followed the instructions there .. is reinstalling IIS my last resort? If I restore my backed up metabase will I introduce this problem again?
View Replies
View Related
I've seen references to this error on-line but the fixes listed haven't helped me. I'm getting the error 'The Requested Resource is in Use' when I attempt to access a classic asp page on IIS on my home machine.
I only get the error when I create a new directory in wwwroot and designate it as an application. If it's simply a subdirectory of wwwroot I can access the asp page just fine. Try to set it up as an application and I get the error. I am running IIS on XP Home and it's working fine exept for this error.
View Replies
View Related
I got error message "The requested resource is in use. " when access a
database asp page. I check and see that IUSR should have all the
rights. It seems that the page doesn't like response.redirect . Code:
View Replies
View Related
I have a problem with IIS + ASP. If I try to read asp page display me this error: The requested resource is in use. In Evet Wiever i have this message: Out of process application '/LM/W3SVC/1/ROOT' terminated unexpectedly.
View Replies
View Related
I install a new forum for my web site, but when i try to login or post a new message it gives this message : "The requested resource is in use." How can i solve this problem ? Why server gives thi message ?
View Replies
View Related
I recently installed project server onto a new server (the server is
an all in one box that hosts the database (MSDE) and Sharepoint as well as
project server). When I attempt to load the project server web access
screen I get the error "The requested resource is in use." I've tried
researching this issue, but haven't been able to find any usable
information. At this point, I'm totally stuck. Has anyone else encountered
this problem?
View Replies
View Related
I am getting an error message - The requested resource is in use on Windows
Server 2003.
I have tried check and uncheck the Cache ISAPI extensions. The web server can serve up HTML pages and images. The problem is with the ASP/ ASPX pages.
View Replies
View Related
I was getting this error message using an ASP to run a stored procedure in ORACLE.
ORA-01013: user requested cancel of current operationMy stored procedure was taking a long time to process.
In the ASP page:
set cmd = server.CreateObject ("ADODB.Command")
with cmd
set .ActiveConnection = cnn3
..CommandTimeout=300 '' <= I added This
..CommandText = mySQL
..CommandType = 4 'adCmdStoredProc
View Replies
View Related
I am -totally- new to programming. I got stuck with this assignment because no one else wanted it so it was assigned to me. I am looking for a book that covers ASP that is easy to read and more importantly easy to understand. I don't have much time to learn this
language. We have several problems at our site and they expect me to fix them ASAP.
View Replies
View Related
I have an ASP page with a form that then I submit to a second page, i have been trying it locally on my test server, (IIS from Windows XP SP1), and it works perfectly. The data is sent correctly, and I can manage it on my second page. For transming the data I use the post method in my form.
Then I uploaded these two pages to the production server (Windows 2003 Server), where I have a lot of files that works identacally. When I call the first page, it loads correctly, I am able to fulfill the form, but when I click the send button, the server send me the "Error 500, Internal Server Error", with no more information.
I have cheked for speling mistakes in the name of the files and in the action section from the form tag in the first page, but everything is ok, my asp code is also ok but I have no clue or idea why this fails. Code:
View Replies
View Related
I have an email containing link say (somelink.asp) A user clicks on this link (say from outlook). because this user is not logged into the site, the request goes to somelink/login.asp.
The user then logs in. After successful login I would like to take this user to the link he clicked on originally. Is this possible without having to pass the lionk url as part of the query string?
View Replies
View Related
if iam requesting a form field, how do i trim that to just the first 2 letters Code:
View Replies
View Related
I'm running a stored procedure that inserts a record into a table then
returns the Identity field value. I've done this kind of thing plenty of
times in the past, but I'm obviously doing something wrong this time..
I've tested the Stored Proc in QA and it works fine. The SQL code runs OK in
ASP (iAffected = 1 which shows the record is inserted), but when I try to
query the resulting recordset, I get an error:
"Item cannot be found in the collection corresponding to the requested name
or ordinal. " Code:
View Replies
View Related
I am taking my first crack at writing some ASP and have no clue as to what this error is pertaining to. I will be in your perverbial debt for ever!
----------------------------------------------------------------------------
The error I am getting is:
Microsoft OLE DB Provider for ODBC Drivers error '80040e21'
ODBC driver does not support the requested properties.
/agentlookup.asp, line 8
-----------------------------------------------------------------------------
And here is the code it is referencing: Code:
View Replies
View Related
I am now all of a sudden getting an error in this sql connection
string, saying that the Provider keyword is invalid:
<add key="MM_CONNECTION_STRING_isox"
value="Provider=SQLOLEDB;SERVER=xx.xx.xx.xx;UID=xx;PWD=xx x;DATABASE=xxxx;"
/>
View Replies
View Related
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
View Replies
View Related
how to write to check verification valid email thru nslookup or mx record or dns record. Is it possible to do that. Is there any tutorial from sitepoint, previously found it but i lost the link.
example to check assume test@domain.com is not a real email, abc@domain.com is real email
how do u check it.
View Replies
View Related