Time And Date Calculation Error
i need to calculate the time and date difference between two times and dates.
Example 1 works fine:
Difference between 27/09/04 10:00 and 28/09/04 12:00 gives a correct answer of 1 day and 2 hours.
Example 2 gives an error:
Difference between 9/16/04 1:50 PM and 9/28/04 11:54 AM gives an incorrect answer of 12 days -56 minute(s) .
How do i fix this?
View Replies
ADVERTISEMENT
I would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.
View Replies
View Related
i want to calculate the total time between to dates and time.
Example: Total time elapsed from date 1 time 1 to date 2 time 2.
27/09/2004 11:00 - 28/09/2004 10:30
The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.
View Replies
View Related
Can i calculate the next month starting day and next month ending date.For example if this is january then i need the next month that is february starting day and february
ending day. I need to calculate the date in that way given below, I
mean without query. Below method is i use it to calculate the todays
date and the end of the day.
MonthLastDay = Empty
dFirstDayNextMonth = DateSerial(CInt(Format(dCurrDate, "yyyy")),
CInt(Format(dCurrDate, "mm")) + 1, 1)
MonthLastDay = DateAdd("d", -1, dFirstDayNextMonth)
View Replies
View Related
i had to calculate the date of birth and current balance of car payments.. tried some calculations but it seems more error msgs i got.
View Replies
View Related
I have the following code:
If ad_expiration_date (date() + 90) then
ad_expiration_date = (date() + 90)
else
end if
What I want to happen is if the ad_expiration_date entered by the user is beyond 90 days from today's date, the Expiration Date should be today's date plus 90 days. If the entered date is less than 90 days from today's date, leave it as entered. The code isn't working correctly, all dates entered are getting converted to today's date plus 90 days.
View Replies
View Related
I have this form where in i calculate the number of months
between 2 dates.It calculates only if both the textboxes have values.
And then i display this in another text box.
The user has to enter the date in DD/MM/YYYY format. user can select
date from calender popup. Apart from selecting the user can also type in
the date.
I am using a function which splits the date entered by the user
into DD MM YYYY and then compares each of these values to see
if its in the valid range like day is between 1-31, month between 1-12
etc.
But i m having a problem. If the user enters characters instead of digits,
my system accepts it in the first box without giving error and then when
the user selects a proper date in 2 textbox its gives an error: 1 is null
or not an object. this error comes at the place where mt function splits
the entire date string into DD MM YYYY.
Could someone please give ne a solution, a way to format the date so that
i let the user enter first 2 digits and then a "/" and then 2 digits and then a
"/" and then 4 digits only.
View Replies
View Related
there i was just windering how do i compare a date/time vlaue in sql server agaisnt the computers' date/time.
for example, if computer date/time is two months or 2 weeks before the database date/time do something
View Replies
View Related
Currently working on a ASP for a friend, which requires the date and
time on it. It pulls in entries from an Access Database with dates and
times in the format of:
"Fri Oct 17 18:02:46 2003"
However my date and time on the ASP page is displayed as:
"Friday, October 17, 2003 18:02:46"
using the script:
"<%Session.LCID = 1033%>
<%=FormatDateTime(Date(), vbLongDate)%>
<%Session.LCID = 2057%>
<%=time()%>"
Anyone know how to change this script, fully or partly to produce the
date and time on the format that's in the access database i.e. "Fri Oct 17
18:02:46 2003" Code:
View Replies
View Related
How do i select all records from a table that has a datetime field in it by date.
so i want all the records that was created today.
if i put only the date it doesn't work. this is what i have:
Code:
strsql = "select cnum from [topline data] where cnum = '" & cnum & "' and activerecord = "& activerecord & " and timestamp <> '12/10/2007'"
View Replies
View Related
I have a simple asp script that pulls data from an ingres database and
displays it on screen.
It all works fine except for date/time fields where the date >=
24/10/2004 and <= 31/10/2004 where it takes 1 hour off the time ie
in the database I have 24/10/2004 08:00
the asp displays 24/10/2004 07:00
The same thing happens for the same date next year.
Any thoughts?
View Replies
View Related
I want to print only the time of the date. the date is in format "dd/MM/yyyy hh:mm AM/PM"
View Replies
View Related
I've had a little search, including here http://msdn.microsoft.com/library/de...ctdatepart.asp
but can't find anything about GMT and Local time.
what time does now() read? GMT time or local depending on where the server is? How do I get the time differences? I don't want to display GMT time for people living in Australia!!
I had a quick search, but it's almost 4 in the morning ( GMT )
View Replies
View Related
the code below fills a select drop down box with dates. There are rules for what the first date is displayed, like, if its a friday today then show monday first etc. There are two problems, one is that sometimes the date goes into the database when sent as DD/MM/CCCC and sometimes it goes in as MM/DD/CCCC.
I need it to go in as DD/MM/YYYY. Also on some occasions when displayed on the page it is shows as 23/MM/200, not showing a valid month which creates errors when put into the database. Code:
View Replies
View Related
Using SQL server I have a table that needs to be automatically filled with a date and time
How is this done?
View Replies
View Related
DateDifferent=DateDiff("d",Date(),rsSelect("ExpiryDate"))
tis is the code to get the date differnt between date now with the date from the DB. becoz the interval is Date(d), how can i get the time different between the time? and the PM and AM too.
View Replies
View Related
I am trying to get this date/time field right, but couldn't find any solution to it.I have a field DateApply, set to Date/Time data type, and the format is dd/mm/yyyy. In my asp page, I set the Session.LCID to 2057, which is the same format as the one I set for the DateApply field (dd/mm/yyyy).
However, when I try to insert the date into this field, the date is different from the one I inserted. For example, I insert 25/07/2005, but when I look into the table, the date becomes 05/07/2025.I have tried to use FormatDateTime before inserting the date into the table, but no luck.Can someone give me a hand on this? I have did some googling on this matter,as well.
View Replies
View Related
I have written asp code to insert current date and time. my database is in sql server 2000. this is the sql query that i m using.
sql = "INSERT INTO tblDailyVisitLog
(UserID,DailyDate,DailyTime) VALUES
('test',"&formatdatetime(date,2)&",'"&formatdatetime
(date,3)&"')"
But when I checked in the database in date and time field it shows "1/1/1900" in both fields.
View Replies
View Related
I am programming in VB Script in my ASP page and i am looking to grab the Data and Time from the systems internal clock.
What I am going to want to do is pre-populate a couple input boxes. So I have to set them to a variable and then get the syntax correct to set the value of the input box. Code:
View Replies
View Related
I got form so it send to database (.mdb) so everything is working. On my form is sending First Name and Last Name to my database, so i wondering is it possible submit the date/time when the form have sent to my database. The scripts are: Code:
View Replies
View Related
I select the date and time from the column date_stamp in database
(example : 11/10/2003 12:48:34 PM),
can anyone please tell me is there any mothod that i can use to separe the date and time??
View Replies
View Related
How can I get date and time on the server. I want to log the date and time on the server when the ASP page is accessed.
View Replies
View Related
I am trying to format the following line fo code so that it shows tha date time in my database as dd mm yyyy
currently in the database it shows as 2006-10-03 08:01:00
Here is the code that I want to format it is posssible to format it in such a way???
Response.Write "<td class=TableFieldInput>" &trim(rsSet("Archive_date")) &"</td>"
View Replies
View Related
I have never done this before however i'd like to know if anyone knows a way that I can UPDATE records in an SQL db with the Current Date and Time???
View Replies
View Related
I'm looping through database results where I have a date time field in the format: 9/2/2007 6:28:53 AM. What I'm trying to do is flag entries that are within the next 12 and 24 hours with a different color. I'm doing this currently with a counter field on another project like this:
PMCOLOR = "#000000"
If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 2800 Then
PMCOLOR = "#FF0000"
End If
If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 1400 Then
PMCOLOR = "#FF9900"
End If
This turns the line red if the current value is within 1400 of target and orange if its within 2800 of target. I want to do exactly the same thing with the date/time field flagging entries red if they are within 12 hours of the current time/date and flagging them orange if they are within 24 hours of current date/time.
I'm not sure how to break down the time and date and compare them to the current time and date, though. Its easy with integers.
View Replies
View Related
i am trying to upload files to a webserver. When i send the file of any .ext i want the filename to contain the filename and date&time in the filename filenamedatetime.xxx
the following is my code piece to send the file:
If FileName <> "" Then
FileName = Mid(Filename,InstrRev(FileName, "")+1)
set fso = Server.CreateObject("Scripting.Filesystemobject")
set fle = fso.CreateTextFile(server.MapPath(FileName))
' write the data
fle.write DataString
fle.close
View Replies
View Related
Im looking for a simple app with a start and stop button that when clicked
will add a time and date stamp into a database (and add it up on a weekly
basis)i wanna keep track of my time on a particular project for the next few weeks
View Replies
View Related
Could someone help me work out out a way to either convert a smalldatetime
value from my database(access) to a normal date with out the trailing time.
Is it simple matter of using FormatDate or does one need to do string
maniupulation?
Current
9/13/2003 11:36:00 AM
What I want:
9/13/2003
View Replies
View Related
I am having a little bit of trouble converting some time/date formatting.
I am retreiving it from an existing database we have (MS SQL) with
"SELECT * from table"
It is in this format "01/02/2005 13:31:00"
e.g. "DD/MM/YYYY HH:MM:SS"
I need to convert this to the format to YYYY-MM-DD e.g "2005-02-08"
Any suggestions would be appreciated. Perhaps some sort of more advanced sql query, or ASP scripting.
View Replies
View Related
Is there any way to add a automatically date/time when a page/script was last updated? The page is not driven on a db
View Replies
View Related
i am using ms access for my database.there is a table named Reservation and of the field inside this table is resDate which is the format is Date/Time.in my asp page (use vbscript), there is a variable where i coded it like this, res_Date = Date().the save data process is just fine but when i look into the data database, my resDate stored data just like this 12:00:00 AM.but when i try display res_Date at asp page, it shows the current data like 12/7/2004.is there any wrong with my code or i just left something?
View Replies
View Related
i'm trying to compare a variable containing a date with todays date.
if tempdate <= now()then
trouble is...
tempdate = 05/12/2003
now() = 11/09/2003 14:04:06
View Replies
View Related
I am aware of the vb function IsDate()... However, I want to check that the value from the form is ONLY a time in the following format hh:mm...
Any way of doing this? (Other then using two dropdowns with predefined hours and minutes?
View Replies
View Related