I have a section on my website that lets users to input their own username and password in order to enter the restricted area, but i notice that some of the users likes to use strange characters to use as their username or password.
how could I trim those strange characters ie. like the follow !@#$%^&*()'{}/?~ out of the input field, WITHOUT using the javascript because javascript can be disabled from the browser and by only using the ASP IF ELSEIF statements to do so?
My record returns a numerical string "02". When I response.write it I want to remove the "0" ONLY from the beginnings. How would I do that?
View Replies View RelatedI know that trim removes white space and the LTrim and R trim removes space from the left or right but how would i trim a string after 20 characters so that i could add ... to the end of the new trimmed string???
View Replies View Relatedif i had a string which looked like this :
,apple, orange, grape, tomatoes
how do i remove the first character[,] from the string using the trim() function?
i don't know what to do here exactly.
i have seen the TRIM function, but i'm not sure if it's the right way to do it.
i have a recordset called RSUSEREDIT.
in the recordset there is a column called "EMail".
i can print out the results using Code:
<%=RSUSEREDIT("Email")%>
the email column always uses the same domain name... - username@domain.com
is it possible to remove the part after and including the "@"?
I'm dynamically building an SQL string to do an execute, and keep ending up with a leftover comma, so the string looks like this.
INSERT INTO Software ( Title, Version, Licensing, Total_Licenses, support_phone, support_email, Campuses_Licensed, Comments, support_web, FundingSource, Course_title, Subject, Grade_level, LocalExpert, ACTIVE, CATE, EntryDate,) VALUES ( 'Bob's Super Crappy Software', '4.3', 'labpack', '36', '555', '555', 'Alexander, Bilhartz, Central, Fairmeadows, Hyman, Daniel', 'James is testing this', 'www.bob.com', 'Campus PO', 'Math', 'Math', '4, 5, 6', 'Patrick Williams', '1', '0',)
Both commas are added dynamically and can be trimmed on the fly. I tried using RTRIM(strSQL, ",") but this didn't work.I put the fields into an array and tried to add only commas to all but the last entry, but that also didn't work.
I have a database field that is a memo type. I would like to be able to only display the first 50 words from the database. I would like for it to show ..... after about 50 words.
I am using <%=Content %>. How do I trim this field to show only 50 words and then ....?
I tried the following code:
Function LengthTrim(input, length)
If Len(input) > length Then
Return Left(input, length) + "..."
Else
Return input
End If
End Function
then <%= LengthTrim(Content, 50) %>
But it would not work. I got the following error message:
Microsoft VBScript runtime error '800a01f4'Variable is undefined: 'Return' .
I am storing URL in a database for a 'sort of' directory type website.The <a href> is built from the recordset of URL's which is all working no problem, easy stuff.What I have found is going to be necessary in some cases is to trim the URL back to just it's www.abc.co.uk address for the link display.
I still want the actual link to go to it's long 'deep linking' location, but there is limited room for displaying a URL that could be a hundred chars long.
Code:
StartTime = FormatDateTime((rs("startdate")),3)
this returns
7/4/2006 1:00:00 AM
I need to trim the seconds off so it looks like this
7/4/2006 1:00 AM
I have an Access db of products which I'd like to use for creating dynamic urls. Each product has a range name which I intend to use to point to the folder containing the relevant image eg pine/001.jpg
My problem is one of the ranges has two names ie Indian Accessories. I can't have a url with a space in it so how can I dynamically alter the field so that it displays the url as either indianaccessories or indian-accessories?
I need to trim a variable to have everything after 4 chars in a string.
IE:
var_temp = 200:16:1234567890
i want everything after 200: to be a variable.
I cannot use:
var_new = right(var_temp,14)
because the string is a different length everytime.
I just dont know this function.
Someone should write a book Javascript for VBScript Programmers. I can't seem to find a native function in Javascript to trim a string. Is there one or does anyone have one handy?
View Replies View Relatedif i have a value of 11.7908787541713
how could i trim it to 11.79 and how do i round the number up?
I am taking a field from a database and attaching it to avariable like so:
varID = rsCheckLogin("LogonID")
This is returning, for example, SA70.
I only need the integer part. How would i remove the SA part, i have belive it must be trim or split but not sure how to use them?
i have a search page results what i want to do is trim the result to 100 chars either side of the matched word but say if the word is at the start or end just to trim 100 chars left or right. does anyone have a function that will do this ?
View Replies View Relatedif iam requesting a form field, how do i trim that to just the first 2 letters Code:
View Replies View RelatedI am trying to make a search page. Once a serach word or words is put in I need it to serach multiple product tables and output the description of any prioduct if the search word is present in the description.
However, If i put in 2 keywords like "paper sticker" I get no results. How do you search multiple keywords? Code:
I am using a Relational database for my site and i have the following tables:
FIXTURES, GAMEDATES
the fields in FIXTURES are:
GameDate
Home
Away
(All of the above are numerical fields)
the fields in GAMEDATES are:
DateID(integer)
GameDate(#Date Field#)
What i have done is in the GAMEDATE field in the FIXTURES table i have used the ID number of the date that i wish to assign to that record - using a LEFT JOIN to display the actual date that is pulled from the GAMEDATES table (That which corresponds to the relevant id used in Fixtures)
The problem is that in some of my code i want to display records using sql and sometimes in the where clause i use the following:
WHERE Fixtures.GameDate<=(Date())
obviously meaning WHERE GAMEDATE is LESS THAN or EQUAL to TODAY.
The thing is when i use the join it does not use the where clause and displays all of the records in the FIXTURES table.
Does any one know how to get around this, i have not received any error messages it just isnt displaying the right data
Im comparing values in a field while doing a loop if sAct<>myData(5,i) then At the end of the loop I make the value of sAct equal the current myData
This will work when comparing other fields withing my recordset (so I know the statement works) but it will not work for the field I want to compare. The only difference with this field is that it has null values. Could this be the problem? if so, how do I deal with nulls?
I have a input form with 5 fields. One of the fields is MajorNo and the other is named Description.
I have a reference table in my MS Access database (tblMajor)that lists the major numbers and their descriptions.
I would like to have the description field in my ASP automatically filled based on the major number entered on the form, so the user will only need to input the major number when submitting to the Access table (tblSalesTotal).
I am trying to pass a hidden field value on a form into another field on the
form so that it can then be inserted in the database, to enable me then to
reference that number at a later date.
(The hidden value (1 for example) would then automatically get passed to the
other input field.)
The code for the text field that allows users to type an number into it for
submission to the db is below, but what code do i need within the hidden
field to populate this text field below so that users do not have to type the
number in? Code:
I have being working with making an edit field over the past few days. The edit function is now working fine. The edit fields that i have are for id, subject, notes, timedate.
All of the edit screens are one line text screens. What I want to do now is increase the size of the notes box to a larger textarea type box to make it easier to edit notes. The notes field in the db is a textarea field. Code:
When you select the "Country" field in a Hotmail "get new account" link, the field "State" changes automatically, giving you the correct States that belongs to the chosen Country.
View Replies View RelatedI want to know what's the differences between
Request.Form("Field Name") and
Request.QueryString("Field Name")
OR they function exactly the same, which is to return the value of the
field??
I would like to capture an entered value and use it in a query (Access)
Part No. __________
Do I need to store it in a variable and then can I have the query come up on the same page - they would enter a value and click a submit button. I'm not sure that I am on the right path. I'm not sure what syntax to use. Code:
What is the correct code to use to hide a section if a specific DB field is
NULL.
I'm trying to select all records that are true.
Code:
activerecord = -1
strsql = "select cnum from [topline data] where cnum = '" & cnum & "' and activerecord = '"& activerecord & "'"
is that right?i get this error when it equals 0. Microsoft OLE DB Provider for SQL Server error '80040e07'
Using asp and mysql, can a text field in the db have a record with asp code in it and then display correctly on an asp page?
My experience is that it does not show anything in the <% %> tags but it shows the asp code when you view source. My coworker wants to make our website database driven and this text field was going to be the page content with html and <% if then else %> statements.
This does not work with php either so is there another field type that will parse server side scripting?
In our ticketing system database, some fields may possible contain XML. To display a field for example, I have always used: Code:
<%=(rs_tkts.Fields.Item("CloseDesc").Value)%>
but this does not display the xml code listed. what I should do?
Im wondering if there is any way to add a field into an MS access Table using SQL/ASP..
The reason im asking is my database online is Access 2000 (which i have at home), and im in work and they use Access 97.. so i cant download the database, add an extra field into the table, and then re-upload..
Ive tried using a Make Table, Update, Append.. but it doesnt like any of them statements..
I need to append a field to a dbase file as part of a web application using asp/ado. I'm trying
Set oRS = Server.CreateObject( "ADODB.Recordset" )
'ors.CursorLocation = adUseClient
'ors.CursorType = adOpenDynamic
ors.Fields.Append "Index", adChar, 255 , adFldIsNullable
The problem is that the routine runs fine with no errors but the field is not added. Can someone help me out?
I have a condition that will run depending if a field in the database is NULL. It will not run at all, and I tried various way to write it but none works so far
'not working
If assignee = DBNull Then
'not working
If assignee = null Then
'not working
If assignee = "" Then
If I write assignee to the page then the value of assignee will write if it has a value and nothing if it is null.
i have a page that calls images from a database, that is 3 images a page but in my database i have more pictures for one record, so i want to have something like a link that will call the next field that has an image and i want it to replace the ones that i already have.
View Replies View Related