Validating Form Fields In Asp Using Dreamweaver Server Behaviours
Can anyone tell me if there is a way to validate form fields using the dreamweaver server behaviours except using javascript. Basically I need a method of validating each form field when the form is submitted. I don't want to use javascript as I know that users can switch 'active scriting' off, which disables javascript. Due to the forms being critical inputs within an e-commerce system, I must validate them 'server-side'. Is their a dreameaver extension that does this or has anyone over come this issue before?
View Replies
ADVERTISEMENT
I have two date fields on a form each made up of 3 drop down boxes:
Day e.g 08, Month e.g February, Year e.g 2008
Each date makes up a start date and an end date.
What I want to do is check if the end date exists and if it does make sure it is not less than the start date. If it is less than the start date flag a message to the user.
View Replies
View Related
I have a asp page that has a form that I have to submit to a third party website.if their is a way to create form values using asp to submit the secure data without having it in a hidden field where it can be seen when viewing page source?
Currently I have my asp code writing out hidden form fields using the response.write when the page loads then after everything is loaded JavaScript submits the form.
View Replies
View Related
I've modified this form to my liking but would like to validate the fields as the user continues from page to page. Does anyone know what I need to do to the code in order for this work? Code:
View Replies
View Related
I have an asp page that has a form and only 1 field which is know as the ID field.
I only want users to enter an Integer value in the field. If they enter anything else it should come up with a pop up box error and not allow them to process the page.
View Replies
View Related
I have a form I am validating on a page. Currently I have the page call itself to check the form values for validity. I want to use the form post method to send the form values to the Update page but can't because I am using the "Response.Redirect" which doesn't post the form values to the next page.
What is a good way to validate a form values then direct it to an update page if values are valid. Should I use Client-Side or Server-side script?
View Replies
View Related
I am trying to create a form which emails the user with details of the
form.
My problem is that when i hover over the sumit button, it shows up as
test.asp and i want it to go to a specific email address.
I did have the action = test.asp but i then installed the FP extensions
and now it holds that value for some reason?! Code:
View Replies
View Related
1)
I have two forms - ie. Rate Request and Booking. I have two databeses. One for rate requests and the other one for bookings.
2)
Upon submiting Rate Request form all customers get their unique quote #.
Question. The booking form has a bunch of different fileds but in essence they are the same as the quote request fileds in respect to the info in both. So to help the customers I want to enable this: upon entering their unique quote # in the Booking form I want the info from their Rate Request to be automatically filled in in the booking form. All infor needs to be in their respective text fields. I know how to populate each singe field, but have no clue how to make this "smart" population.
View Replies
View Related
I need to know how i can set up a form submitted, that will link to a confirmation page on my website, rather than showing results of what the user filled out... this is bugging me so much....
View Replies
View Related
has anyone here had problems trying to retrieve form elements from a dreamweaver insert form? Code:
View Replies
View Related
I'm new to ASP so I'm using DWMX as a crutch. It created the db connection and recordset code for me and all I want to do is have the page update the db with the result of a variable.
In plain English, I'm trying to update a field called Score in the table quizOne with the results of the variable score where the username field matches the session variable MM_Username. The recordset is called update_score.
Based on other tutorials and forums, I tried this: ....
View Replies
View Related
I'm a beginner when it comes to ASP, so forgive my vagueness. I'm using Dreamweaver MX 04 to upload files I'm creating from templates and saving as asp files. I can see the file on the server, but when I point my browser to it, I get an internal server error. What am I doing wrong?
Some files are showing up and some are not. The only ASP even used in the template are library items, for example:.....
View Replies
View Related
I have a simple ASP form in which I am reading and showing the data from SQL Server database. This database has a nVarchar field, which stores some data in Chinese language. When reading and printing the data using a SELECT query it shows ??? (Question Marks) instead of the Chinese data. I have checked using Query Analyzer that the data is correctly stored in Chinese only.
I have looked up for this problem and it looks like many have faced the same before. But the only solution which seems to be provided for this is using the FORMS 2.0 controls, because VB converts the Unicode to ASCII and that corrupts the data. But is there any other solution to this?
I am using Dreamweaver to write the ASP pages. Dreamweaver is capable of showing the Unicode data, but can’t do much if it gets corrupted data from the VB itself.
So Please any help will be highly appreciated.
That’s the sample code which I am using if it helps: .....
View Replies
View Related
Would anyone be able to give some guideance in ASP code as to how I would repeat a section of input fields in a form based upon the number of guests that are attending an event?
Basically, what needs to happen is if 3 guests are attending, I need the Name, address, city, state fields to repeat so they can be filled in with information.
Then all of the information from the whole form is submitted which returns an email to the administrator of the event.
View Replies
View Related
I have an asp page which has a number of form fields on it (about 50). 2/3rds of these fields are used to store username (windows username) and date (todays date). I want these fields to be locked so the user cannot enter any info into them. The infor will be grabbed from the current user and the current date.
However, I only want these fields to be populated only when the left most field is changed. Once the fields have been populated the username and date fields will change with however is logged in and the new date.
View Replies
View Related
I have a form that will be filled out by users, what I would like to do is when the user selects a state from a dropdown list i want to have the City field show select options based on their state. I know this can be done but I dont remember how.
View Replies
View Related
I need to loop through all submitted form fields and place them all into 1 variable but i have no idea how. Here's what I have so far:
for each item in request.form
myVariable = "formfieldname:" & item & "formfieldvalue:" & request(item)
next
response.write(myVariable)
The problem with that is that response.write(myVariable) only prints the last field in the form.
I know that if I move the response.write(myVariable) INSIDE of the loop it will print correctly but I am not trying to print the form fields BUT I AM TRYING to store them in ONE variable.
For example:
myVariable = formfield1name:formfield1value:formfield2name:formfield2value:formfield3name:f ormfield3value:ETC ETC
View Replies
View Related
Code to email form data via ASP. Forced to use CDOSYS by 2003 server at host. It sends an email fine, but the form data is missing. Where my going wrong? Could it be the html file's form actuating the .asp file? Could it be an enctype issue? Or bad ASP syntax... Code:
View Replies
View Related
Can someone tell me how I can take a bunch of form fields using Request.Form, and put them in a array. And then, how do I send that in and INSERT sql.
View Replies
View Related
I have about 30 names of workers (and their IDs in hidden fields, that depend on their departments) in one form, beside them there is one dropdown list for each worker, with same items. I want to select item from dropdown list for each worker, that will write item ID in another hidden field... and then I want to submit worker's ID, ID from dropdown list etc....into another .asp page and sql db.
If I use next way :
<%
FOR EACH name IN Request.Form
Response.Write("<BR>")
Response.Write(Request.Form(name))
NEXT
%>
I get only values of IDs from dropdown lists. But I need workers' IDs, too.
View Replies
View Related
how can I send the whole form using the script below, without listing every NAME of the form. Basically I wondered if you can just put a certain code in that will send all the fields of the form without putting each NAME of the fields down indiv individualy??
My forms Name is 'conf', so I was wondering if there was a code like SENDWHOLEFORM="conf", (I know it obviously won't be that, but just to put the point across!)
<%
DIM strNAME, Mailer
strFirstName = Upload.Form("NAME")
Set JMail = Server.CreateObject("JMail.SMTPMail")
JMail.ServerAddress = "10.2.3.2"
JMail.AddRecipient "me@me.com"
JMail.Sender = "me@me.com"
JMail.Subject = "Submitted Item to sell"
JMail.Body = "Name: " & strNAME
JMail.Execute
Set JMail= Nothing
%>
View Replies
View Related
I have about 30 worker names (and their IDs in hidden fields) in one form, beside each worker I have a dropdown list with same items. When I select an item from dropdown list its ID is written in another hidden field. I want to submit values from hidden fields into another .asp page and sql db. If I use :
<%
FOR EACH name IN Request.Form
Response.Write("<BR>")
Response.Write(Request.Form(name))
NEXT
%>
I get only values from dropdown lists IDs. how to loop through all fields and get IDs of workers, too.
View Replies
View Related
I have the following asp code:
response.write "<td align=left colspan=2 class=text>" & _
"<input type=text name=ProjectDescription STYLE='width:465px' value=' " & ProjectDescription &" '>" & _
"</input></td>"
The problem I have is when ProjectDescription contains a ' the data gets truncated. How can I resolve this.
i.e. ProjectDescription=doesn't
View Replies
View Related
I have created an email form in which all fields must be completed. If all the fields are not completed "submit" causes a refresh using response.redirect, Problem is allthe fields that were previously filled in are empty.How do I keep the values of the fields on refresh?
View Replies
View Related
I have a form submitted with a form field called contents. This could have loads of text in. What i need to do is scan this field for words that match the text in a database record called PAC_WORD. This could match 3 or 4 of the words put. Basically for each word picked up I want to write " This item found is not allowed
View Replies
View Related
I am creating a form that uses a postcode lookup that opens in another window to confirm an address how would I pass back the address and populate the form?
View Replies
View Related
How do I check the field for example zip code to make sure that it has 5 digits?
View Replies
View Related
I have a web form which is quite long. My first field is required. If my user submits the form the page just sits there and the do not see my validation message at the top of my page. how I can reposition teh page so they see teh message i.e.scroll back up the page?
View Replies
View Related
how to access my HTML form fields from ASP. i don't know how to access HTML form fields from ASP code.
View Replies
View Related
i wrote a script in asp/vb script that validates form fields. all works fine, apart from the fact that alerts are being shown against the empty form fields when the page loads the first time.
so, validation should not be carried out when the page loads the first time. my friend challenged me and said i can achieve this "using a hidden form field or even the submit button" and submitting the page to itself
i was more thinking of using session variables or a session cookie, but does anyone know how you could accomplish this using a hidden form field?
View Replies
View Related
Here's what I want to do ... or here's my problem. I have a 'ICQ' on my user's profile, so it's a number, now when I update the database it DOES NOT use the single quotes, so it looks like:
& "ICQ = " & Trim(FormatStr(Request.Form("ICQ"))) & ", " _
Now, the prob with it is when a user DOES NOT type anything in it, since he doesn't have a ICQ number, then it gives a syntax error because your inserting nothing without any single quotes. How do i fix it? Or how can I NOT make it update if it doesn't have anything in the text box?
View Replies
View Related
have a problem of concantenating two form fields. I have 3 text boxes,which is supposed to grab the user date of birth information. One text box for the day, the other for the month and last one for the year.
I want a situation where i can just concantenate them into one variable to be picked up by my sql query like this 04-05-1982 into an access database. Now this is my code: PHP Code:
birthday=Request.form("dd")&"-"&Request.form("mm")&"-"&Request.form("yy")
If i put the '"&birthday&"' variable in my sql query it doesn't pick up anything.
Please how can i solve this.
View Replies
View Related
I can get all fields, but how do I not get the button in the loop
Dim FormFields
Set FormFields = request.form
Dim Field
if request.form("Button2") = "Update Order" then
For each Field in FormFields
response.write Field & " = " & Request.Form(Field) & "<br>"
Next
end if
View Replies
View Related
