Call To OS From App Taking 10 Mins On Certain PC
Jul 9, 2014
I have written a java app that's been working for a few years now and the client is very satisfied. However, a certain user has been experiencing a problem where the app runs fine BUT whenever it interacts with the OS (Win7 in this case), it takes ~10 mins to respond. Actions include, for example, exporting the currently displayed JTable to a CSV file or making an OS call to open up MS Word, etc.
I copied the users version of the app onto my platform (win 8.1) and tested it on winXP too with no problems which points towards an issue on the users particular PC. Furthermore, it used to run on the users PC fine until something (??) happened.
I've tried the following so far:-
1. looked at System restore to check anything new installed - nothing obvious
2. disabling anti virus - problem still occurs
3. monitoring JVM process time using Task Manager - little CPU time seems to be utilised (=> no loop etc)
I'll try :-
1. using JvisualVM - although I don't think this will show me what's going on with the OS
2. excluding the JVM and the app from all anti malware
Any app or something that shows interaction with the OS so I can trace what might be intercepting the call from my app to the OS?
View Replies
ADVERTISEMENT
Apr 11, 2014
This piece of code is giving me the most trouble as I cannot convert the self defined class (Fraction) into int in order to store the elements in the variable (max). What is the best way to go about grabbing the next element and storing it in max and compare it to the previous to get the highest and lowest value?
System.out.println("Enter numerator / denominator");
frak[0] = new Fraction(keyb.nextInt(), keyb.nextInt());
frak[0] = max;
for (int i = 1; i < frak.length; i++){ // starting from array element 1
System.out.println("Enter numerator / denominator");
frak[i] = new Fraction(keyb.nextInt(), keyb.nextInt());
if (max > frak[i]){
}
View Replies
View Related
Oct 29, 2014
I have a small bug in my program. The user is asked what person(s) information they want to access but lets say they want captain they must enter "captain" twice. I think it will make more sense to you with the code. I have searched all over to see what is causing the bug but still have found no resolution. I even tried making two different scanners but that didn't work either.
I know the while loop (line 16) I am using is causing the bug because it works fine without that but then I cannot validate the input.
package myproject;
import java.util.Scanner;
public class Enterprise {
public static void main (String[]args){
String userInput;
[Code]......
View Replies
View Related
Oct 25, 2014
What I have so far are two classes, Movie class and MovieTestDrive class. I've to get the title, genre and ratings for movies and then put them into an array and call the playIt() method.
I would like to create a for loop to iterate three times for three instances of the Movie class but I don't know how to do it.
When I try to run the code, it won't work and I don't know if this is because I have Scanner running incorrectly whilst encapsulating my data. What I have so far:
class Movie {
// Create instance variables for the Movie class.
private String title;
private String genre;
private int rating;
// Use getters and setters to set and display the variables.
[Code] .....
View Replies
View Related
Oct 29, 2014
I am working on a web-application where i have a functionality which generates reports based on the data from DB. for small amount of data its working nice if the data is huge its taking more time. to avoid this problem i developed a standalone batch where i generated the jar file for the sources in web-application and made a call to the appropriate methods.
But my problem is if web-application takes 10 secs to generate the report but in the case of standalone its taking nearly 3-5 mins to generate the same report. i didn't do much of the changes in code just using the same code as web-application
I am using tomcat 6 application server to run the web-application for standalone using batch commands.....
View Replies
View Related
Apr 26, 2015
This is the code that I have so far, It will only print out the digit if it is entered first..How to I get it to print out all digits? and I am getting an error that the c is not initialized
import java.util.*;
//Write a program that prompts the user for some text. Output only the digits in that text. Hint: Use a loop and the Character.isDigit method.
public class Q1
{
[Code].....
View Replies
View Related
Feb 3, 2014
I am stumped on a coding project I am working on. I am making an inventory program with predefined values for the items. I am not sure how to iterate through my arrayList, and allow the user to input the "number sold."
I have made an arrayList and populated it using the add(), but I am not sure if it is working correctly. This is my inventoryItem class :
package inventory;
import java.text.DecimalFormat;
public class inventoryItm {
String itemName;
double unitPrice;
int numberSold;
[Code] .....
View Replies
View Related
Feb 1, 2015
There is a problem that I am facing while using the Scanner class for taking inputs from the user. Suppose if I need to take an integer and a String input from the user, and I take the integer input first then the place where the user has to input the String skips and the variable shows a "" nothing on printing it. Suppose in this code snippet
import java.util.Scanner;
public class Test
{
public static void main(String[] args) {
Scanner sc = new Scanner(System.in);
System.out.println("Enter a number");
int n = sc.nextInt();
System.out.println("Enter a word");
String str = sc.nextLine();
System.out.println("Enter integer is " + n);
System.out.println("Entered statement is " + str);
}
}
The output is
Enter a number
13
Enter a word
Enter integer is 13
Entered statement is
I need to know why this happens and how should I avoid it. I've seen that taking the String input first solves the issue but while taking the input in a loop to populate a database the program only lets the user enter the first statement and the following statements are skipped.
View Replies
View Related
Jan 20, 2015
I've looking for information on taking a range of data from a google sheet such as the one below.
JavaGroupCat.png
The function that i'm trying to accomplish is allowing a user to run the program and input their 5-digit Unique - ID. After inputting their 5-Digit ID the program will take that input, and check whether or not that ID is present on the spreadsheet.
Ex: (Using the numbers from above) I type in : "89504" then (I would want the program to spit out if the ID is on the sheet).
(89504 appears on the sheet) So i would want it to print out something like "ID is found on list "Cat".
Associated named include: "Phil Roberts".
I tried, with my limited knowledge, to create what I have described above.
import java.io.*;
import java.util.*;
public class SwitchesTwo
{
public static void main(String args[]) {
System.out.println("Welcome to the ID # Checker");
System.out.println("Enter the ID of the person you are trying to verify");
[Code].....
The issue I have with the mock-up above is the fact that I have to manually add in every individual name and ID. I would much rather write code that would allow it to update as I update the spreadsheet. Therefore, no need for 800+ cases. (theres around 800 ID numbers for this project)
In a perfect world, the code would be something like "Take info from cells C5 - C2000 and store as string array" (I think array would work.) while also doing the same with B5 - B2000.
View Replies
View Related
Sep 5, 2014
I am not very comfortable with Strings in Java. The problem I am facing is, taking a string that contains a sentence and reversing the words. Example would be, "Hi I am Bob" and changing it to "Bob am I Hi". Then returning the String.
My initial thoughts were to change the string into a character array and then manually doing the work with loops and tedious comparison statements. I quickly realized that there must be a better way but I am not very familiar with strings in Java to know what a more sufficient way would be.
View Replies
View Related
Apr 27, 2014
I've built up an unreasonably large and unreasonably complicated JPanel. Unfortunately, when I use setViewportView to add it to a JScrollPane, a get an extended UI freeze—that operation takes several seconds. I'm trying to figure out what's taking so long. I've tried some fairly extreme things, like overriding the paintComponent, PaintComponents, paintChildren, paint, repaint, validate, revalidate, and validateTree methods in the panel with no-ops to try to figure out what's taking so long, but to no avail. I've tried validating the JPanel before adding it, but that has no effect. If I override the addImpl method of the scroll pane, that makes things quick, but it doesn't really narrow things down much.
View Replies
View Related
Feb 7, 2014
I am trying to test the instanceof keyword. To do this, I've made a method with a simple logical test like so:
Java Code:
Vehicle vehicle1 = new Vehicle();
public void Type(){
if (vehicle1 instanceof Vehicle) {
System.out.println("Type = Vehicle");
}
else if (vehicle1 instanceof Car) {
System.out.println("Type = Car");
}
else if (vehicle1 instanceof Truck) {
System.out.println("Type = Truck");
}
}
} mh_sh_highlight_all('java');
I wanted to try implementing it into the class definitions for Vehicle, then extend that to Car and Truck, but I'm not sure how to use this test in a general case.
The only way this method works is if I set the test to specifically accept a specific object as a parameter.
I want to test multiple objects, but I'm not really sure how else to do this without simply copy-pasting the logical test multiple times and changing the respective objects that are used as parameters.
View Replies
View Related
Jun 7, 2014
I'm developing a Swing application for the first time. To test my application, I have currently hardcoded some text labels and fields in a JPanel, so that a user can enter input details for a maximum of 3 segments. But this limits the maximum number of segments to 3. However, the requirement is that when the user enters the number of segments (could be greater than 3 as well), corresponding number of input sets need to be taken.
Screenshot attached, with values entered.
Basically I want to know how I should go about taking the inputs from the user.
View Replies
View Related
Jun 6, 2014
Scanner sc = new Scanner(System.in);
String input = sc.nextLine();
if (input == "next") {
System.out.print("good Job!");
}
else {
System.out.println("Why ?");
}
//If I type in next it prints out "Why ?" instead of "Good Job!" - Why though ?
View Replies
View Related
Apr 24, 2014
At the moment I am studying it and the problem is Taking a range of names in an array and outputting them alphabetically, But for some reason I get an outOfBoundsException. And its starting to get to me. How to put the code in
import java.util.Scanner;
import java.util.Arrays;
public class lab241 {
public static void main(String[] args) {
Scanner kb= new Scanner(System.in);
String[ ] names = new String[4];
names[0]= ("Horatio");
names[1]= ("Anatoly");
names[3]= ("Evelyn");
names[4]= ("Anna");
Arrays.sort(names);
for(String N: names){
System.out.println(N);
View Replies
View Related
Feb 21, 2014
I have a primefaces datatable with about 52000 records to be fetched.Since it is a large dataset,i tried using live scrolling feature of primefaces with scroll rows equal to 20.THe number of columns is 53.The table also has filtering and sorting feature on its each column.Still i am not satisfied with the performance of the table.It takes about 15 secs for the page to load,worst thing is that it takes about 65 secs for the next set of 20 records to be loaded on reaching the end of scrolling.
Just for testing i reduced the total number of records to 25000 and the preformance improves with scroll time of 29 secs.I am really not able to understand why it is taking this much time when i am displaying only 20 records at a time.The total number of records should not have affected the performance.
My JSF code snippet
<p:dataTable id="arcRecList" var="data"
value="#{archivedRecordBean.archiveItems}"
tableStyle="table-layout:auto; width:80%;" styleClass="datatable"
scrollable="true" scrollWidth="84%" scrollHeight="69%"
columnClasses="columnwidth" liveScroll="true" scrollRows="20"
filteredValue="#{archivedRecordBean.filteredArchiveItems}">
[Code] ....
View Replies
View Related
Mar 2, 2014
I need to insert a break line to a text message on hitting enter by taking its ascii value i.e 10.I have used node.insert commands.I have tried using node.insertAttribute and node.insertChars but is not working ....
View Replies
View Related
Jan 23, 2014
my first assignment is to convert a md5 string to password of the user, the MD5 function is available, i just need to call it and print the result. Here is my code. I can't call the md5 because of the String[] and String is different in main and md5 function,modify the code so it can run properly, also the input has to be entered from command line.
import java.security.*;
public class PasswordCracker {
public static void main (String[] args){
String password;
md5(args)
System.out.printf(""+password+"");
[code]....
View Replies
View Related
May 18, 2014
How to call/define/describe self method.. below is my code :
Java Code:
public static void main(String[] args) {
banana1();
banana2();
banana3();
banana4();
banana5();
banana6();
[code]....
how exactly to call a self method ?
View Replies
View Related
Jul 21, 2014
whether we can call DTS directly from Java.Solution which we got as below:-
1. Create dts
2. Create job in which we have to call dts
3. Call job from stored procedure
It pretty lengthy process and we are not sure how error handling can be done in this scenario.
View Replies
View Related
Jul 22, 2014
We are using MS SQL server 2000, in which we have explored calling dtsrun.exe from Runtime class in java. But it is not suggested way to call dts, as error handling will be difficult.
whether we can call DTS directly from Java.
View Replies
View Related
Oct 3, 2014
My code has a method where the users input a bunch of variables and then those variables get added together in a new variable. What I want to know is how do I call the variable that is in the other method to another method?
import java.util.*;
public class Calc{
public static void main (String [] args){
determinevalue1();
determinevalue2();
determineTotalvalue(double value1, double value2);
[Code] ....
View Replies
View Related
Dec 6, 2014
I am trying to get the program to ask the user to enter the project grade and if it is less than 65, then I want the program to display "fail" or if it is greater than 64 than I want it to display "passed". In this project I have to include a method and I am trying to call it in my if-else statement. I keep getting an error message saying "Project.java:143: error: incompatible types: void cannot be converted to int". I posted my code below. It's a long program, but this part is toward the bottom.
import java.util.Scanner;
public class Project {
public static void main(String[] args) {
//call method
welcomeMessage();
[Code] ....
View Replies
View Related
Oct 30, 2014
I have two comboBoxes - one in main and another in my 'windows' class. The code below is in main and references the comboBox in main but I need to use the comboBoxEnv out of my 'windows' class. How can I do that so it says ComboBoxEnv rather than comboBox?
JMenuItem menuExport = new JMenuItem("Export");
menuExport.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
if(comboBox.getSelectedItem() == null){
[Code] ....
I've gotten access to it by changing my code and making a method of it but I'm not sure of what I do now
exportImport.comboBoxEnv();
View Replies
View Related
Apr 17, 2014
How do I call a class within the main. For example, this is what i have in my code right now. I am trying to call the class BlackJackGame.
package blackjack;
public class BlackJack {
public BlackJack() {
BlackJackGame();
}
}
View Replies
View Related
Jun 9, 2014
How do i call the method without using inner classes in this example:
jt = new JTable (model) {
public boolean isCellEditable (int row, int col) {
if (col == 5) {
return false;
[Code] ....
View Replies
View Related
