I'm using the class below to encrypt and decrypt data in my program. It works rather well with the exception that I can't for the mind of me get the recreation of the key to work. When the program runs the first time, it creates a key and saves it to Data.txt. This part works fine, and there are no errors, the encryption and decryption works until I reload the program and it tries to recreate the key using the String in the .txt.
read = loadFile.readline();
byte[] data = read.getBytes("UTF-8");
key = new SecretKeySpec(data, 0, data.length, "PBEWithMD5AndDES");
I've looked at:
java - convert Byte Array to Secret Key - Stack Overflow
java - Converted secret key into bytes, how to convert it back to secrect key? - Stack Overflow
and a number of other sites which didn't work, both of these however suggested the key = new SecretKeySpec. The actual key became: "[B@79fe3f51". Whereas the recreated key became: "[B@3e1d1648".So they are close, but not the same.I create the original key like this:
public class Encryption {
public Cipher dcipher, ecipher;
// Responsible for setting, initializing this object's encrypter and
// decrypter Chipher instances
Encryption(String passPhrase) {
I'm stuck with the following error message when i try to convert a String to XML and back to a String.
Exception in thread "main" org.w3c.dom.DOMException: WRONG_DOCUMENT_ERR: A node is used in a different document than the one that created it. at com.sun.org.apache.xerces.internal.dom.ParentNode.internalInsertBefore(Unknown Source) at com.sun.org.apache.xerces.internal.dom.ParentNode.insertBefore(Unknown Source) at com.sun.org.apache.xerces.internal.dom.NodeImpl.appendChild(Unknown Source) at com.innovatrail.consulting.xml.XMLTEST2.main(XMLTEST2.java:66)
Below is my Java code snippet: The code syntactically correct except line 66. If you comment out line 66 in the source code, everything works just fine. The XML representation of my input string is denoted by INPUT 1 and that of my output string is denoted by OUTPUT 2.
I am looking for a good and reliable library to read a string to construct a list of Integers, Doubles, Booleans, etc. This library should be robust enough to handle faulty input from an inexperienced user.
Ok, so I am relatively new to datagrams etc. I have three projects set up right now: Client, Client2, and Server, which all interact with each other to send coordinates of player1 and player2 back and forth (X, Y, this is in 2D space not 3D). I have everything set up perfectly except for one problem: I can only send the X coordinate back and forth for each player. I am getting the weirdest error, a parsing error. The way I communicate is I have everything sent back and forth in one string. Then I use the .split() function to turn that string into an array that contains the x and y coordinates. I've done several tests and to no avail. Here's my code:
Server:
Java Code:
package theGame; import java.io.IOException; import java.net.DatagramPacket; import java.net.DatagramSocket; import java.net.InetAddress; import java.net.SocketException; import javax.swing.JOptionPane; public class Main { static String p1X; static String p1Y;
[Code] ....
Lines 177 on Client1 and 172 on client2 are where the debugger is saying that I parsed wrong.
Also, if your are going to test this you will need to have the LWJGL libraries in your build path.
I have this project due and its asking that i print out what type of triangle it is when the user inputs 3 sides. I have most of it done and working, but it pops up different windows instead of using one window for everything. The assignment says it needs all the final info to be in one window. The boolean is coming from another method. I'm unsure how to get it into a string (Or if that's what i have to do). The method must return a boolean true/false.
import javax.swing.*; public class Triangle { public static void main(String[] args) { int side1 = getSides(); int side2 = getSides(); int side3 = getSides();
In my Java class, the last assignment we had to turn in was to create a program that would take a users input and create a new type of animal. I went through the different steps in the instructions, and everything seemed to be going well up until the point where we actually took the users input and created the new animal. Specifically, I kept getting an error stating that I could convert a String to an animal.
I'm attaching the main class (Animal), one of my animal classes (Bird) and the class where I'm getting the error (AnimalStuff). I turned the program in as is, so what's done is done, but I'd like to learn what I'm doing wrong and what I can do better. I do know that the loop in AnimalStuff is wrong as it doesn't work right either, but I'm more concerned about the conversion from String to animal, as the entire program depended on this to work, and it doesn't.
public class Animal { /** * @param args the command line arguments */ public static void main(String[] args) { } public static String kind; public static String integument;
[code]....
Is there anything that jumps out at to what I'm doing absolutely wrong?
I've started writing a new program that Scans for some strings. I want to specify a random Integer to those Strings in order to do my desired idea. what should I do?!! my codes are here :
import java.util.Random; import java.util.Scanner; public class Draw { public static void main(String[] args) { System.out.println("This Program is written to solve little problems in families cause of doing unwanted works!!");
[code].....
now I want to Specify an Integer to each person that has been scanned! for example if the first person is " David " , which is a String, in the next step :
Random randomNumber = new Random(); randomNumber.NextInt(101); int David = randomNumber.NextInt(101);
How can i convert date to string. Is this the best way
// Create an instance of SimpleDateFormat used for formatting // the string representation of date (month/day/year)DateFormat df = new SimpleDateFormat("MM/dd/yyyy HH:mm:ss"); // Get the date today using Calendar object.Date today = Calendar.getInstance().getTime(); // Using DateFormat format method we can create a string // representation of a date with the defined format.String reportDate = df.format(today); // Print what date is today!System.out.println("Report Date: " + reportDate);
I am converting String to date object while converting this i am getting Run time Exception. Here in this code i am using String tokennizer reading a data from a text file. Here is my code
public static void main(String[] args)throws Exception { FileReader fr = new FileReader("g:abc.txt"); BufferedReader br = new BufferedReader(fr); String line = br.readLine();
I am obviously new to programming and Java so I set myself the goal of creating a very simple auto type style of program so it gets the users input and relays it out again but potentially to another window (I am currently testing to notepad). The reason I am trying to make it is because i thought it could be quite simple and I can build on it as a project to make it better.
The issue I am having is that it outputs the first character to the window I am selected (again testing into notepad) but then stops and doesn't output anything else. I tried to figure out what was going on by putting a System.out.println(arr[6]); after the delay method but it just output a line so almost like what I was putting into the array was only storing the first character of the string? I cannot figure out why that would be...
import java.awt.*; import java.awt.event.InputEvent; import java.awt.event.KeyEvent; import java.util.Scanner; public class MyBot public static void main(String[] args) throws AWTException { //initialising robot Robot r = new Robot(); Scanner input = new Scanner(System.in);
I am supposed to write a program on PuTTY using UNIX (I have Windows 8), but I am not comfortable with it yet, so I am using Java through NetBeans (IDE 7.4).
The program has to follow these instructions (ignore the Linux part of the instructions, the rest is in bold):
Write a program on the Linux system using the putty utility. The program should get strings of data from the command line (that is, look for the data in the "args" array of strings). Use a loop to convert each of the strings in the array into a double and add the number to a total. Print the total after all of the strings have been processed.
The program will use try-catch to catch any error that occurs. If an error occurs, the program will print a message saying that the error occurred. The program can end at that point.
You should create the Java program using the nano editor. The input data should be a list of numbers on the line that runs the program.
The problem so far is that I keep getting an error when converting a String value into a new double value. I have yet to code the try-catch method in my program
Java Code:
import java.util.*; public class Program13Strings { public static void main(String[] args) { Scanner scan = new Scanner (System.in); System.out.println("How many lines of data do you wish to enter?"); int size = scan.nextInt();
[Code] ....
*NOTE: right where my code says double newDouble = Double.valueOf(newResponse); is where the error is occurring.
*ERROR: Exception in thread "main" java.lang.NumberFormatException: For input string: "abc"
at sun.misc.FloatingDecimal.readJavaFormatString(Floa tingDecimal.java:1241) at java.lang.Double.valueOf(Double.java:504) at program13strings.Program13Strings.main(Program13St rings.java:21)
I have to use a long primitive type for the input of a credit card number and ID the credit card by using the first number of the input; however, the only way I know for that is to use charAt, which is used for a String. Is there a way to convert long to String, or am I missing a better solution? (There's no code because I'm still doing the pseudocode).
I am pretty new to Java and am just learning about two dimensional arrays. I think that I understand the concept, but I seem to be having trouble adding stuff to my array. I wanted to make an array to hold both strings and integers, but wasn't sure if I could put integers in a string array. So I thought that I would be able to convert my integers to string and then add them. This however causes an error. This is my code(yes its probably not the best):
static String [][] students = new String [14][4]; static int number = 0; String fName, lName, fullName; int test1, test2, test3, test4; String a, b, c, d;
In my java file I made Strings of date and time, but my MYSQL database needs Date and Time of course. I've tried to convert them, but I keep getting this exception: org.apache.jasper.JasperException: java.lang.NumberFormatException: For input string: "2013-02-20"
public class Vogel { static final String url = "jdbc:mysql://localhost:3306/turving"; public static void Insert(String datum, String tijd, String plaats, String spotternaam, String vogelsoort) { try { SimpleDateFormat format = new SimpleDateFormat("YYYY-MM-DD"); SimpleDateFormat formatt = new SimpleDateFormat("HH:MM:SS"); java.util.Date parsed = format.parse(datum); java.util.Date parsedd = formatt.parse(tijd); java.sql.Date sql = new java.sql.Date(parsed.getTime()); java.sql.Time sqll = new java.sql.Time(parsed.getTime());
Run the code along with the attached csv file. The GUI contains a short explanation of what I am looking for. I have tried converting the integer array to a string array but the output is not the same as the command line. I receive errors when I compile.
I am trying to make a program that calculates the change due in dollars and cents. The user inputs both the amount due and the amount tendered. My program only works with whole numbers?
Currently, my program converts Long values to String. And when I test it out, it do print out the correct output. However, when the converted String value is passed over to be written in a text file, it seems that BufferedWriter isn't printing out the outcome that it's supposed to be.
saltVs = Long.toString(saltV); System.out.print(saltVs); //will print out 79723172
Now the problem is here...It only prints out the last digit of the String value (instead of 79723172).
Here is my FileWriter/BufferedWriter part.
Why is that when I run my program using command prompt, it prints out the output that I wanted, but however when it comes to writing to the file, it doesn't come out right.
I'am trying to converting string data into xml data using xml beans and StringEscapeUtils.This is work fine but in one case it if the data contains special characters.
Code snippet -------------------- import org.apache.commons.lang3.StringEscapeUtils; import org.apache.xmlbeans.XmlException; import org.apache.xmlbeans.XmlObject; public class ParseXMLData { public static XmlObject parseXML(String stringXML) { XmlObject xmlObject = null;
[Code] ....
success case --------------------------- i/p------<aaa><bbb>This converts string to xml</bbb></aaa> o/p---<aaa><bbb>This converts string to xml</bbb></aaa>
Failer case ----------------- i/p----<aaa><bbb>This fails if it contains < symbols</bbb></aaa> expected o/p----<aaa><bbb>This fails if it contains < symbols</bbb></aaa>
Observed that it converts < to '<' but as per xml rules, if data contains '< ' it fails. I want to convert staring and end tags to xml format and if data in b/w middle of starting and ending tags do'n need to convert it. How to do it.
I've been putting together an addressbook and try to work on some idea but I have hit a bit of a wal early on, and Im sure the problem is easy to resolve, I just can't get the old brain to do it.At present I have 5 classes
I have taken EnterDetailsPanel out of the main GUI code, as I plan, or had planned on using additional JPanels for the other options of the application until I got stuck. What I want the EnterDetails panel to do, which it does so far is to have the user enter all of their information and when the button is pressed it will then create a PersonDetails object and here is where my problem is. how to get the object from the panel back across to the GUI which initalises the AddressBook class in the constructor and add it to the List via an addDetails() method.
If I create a quick method in the AddressBookGUI class I can add the object to the List fine, I'm guessing this is because I have created a new instance of the AddressBook in here already via the constructor, however if I add an AddressBook reference in the EnterDetailsPanel I get a nullpointerexception for the opposite because it's not been created in there.These are what most of the classes do so far.
PersonDetails has a reference to the AddressDetails and holds all information for that person.AddressBook contains a List that accepts PersonDetails and has methods to add/remove the person.AddressBookGUI creates a new instance of the AddressBook class along with the general gui things. EnterDetailsPanel is added to JTabbedPane in the GUI class and allows the user to enter their details and submit those via a button which will then create a new PersonDetails object that I am trying to get added to the AddressBook class List
I am trying to figure out how to get information back from a different method.
Basically I want to write a program to create a car, but I want to be able to add features based on user our put (V6 versus V8, Color choice, etc), but I want each one to be broken out into their own method but I am unsure of how to call from the main method and return the variable (engineSize = V8, color = blue, etc).
I have a website which requires login. After I enter username and password and click login button, a new page is loaded. In that page I have a username in the right up corner. When the user clicks logout button, Session.Clear() method is called and also Response.Redirect(" to login page "). It works OK, but the problem appears when I then click Back button in the browser. It gets me back to previous page with the username in the right up corner. Insted, I would like to show message asking user to enter password again so he can login properly.
how to have an application restart if the user inputs an incorrect integer in a JOptionPane question? I know how to do it with the Scanner class but nothing I do seems to work. This is the beginning of my code:
import javax.swing.JOptionPane; public class Pay { public static void main(String[] args) { String level = JOptionPane.showInputDialog("Please select your skill level: 1, 2, or 3"); int levelPick = Integer.parseInt(level);