My situation deals with zero point... I have an issue where when my computer program equals zero, it starts to send a command to the camera and the camera ball starts going erratic. I want to try and refine the code so that when the camera goes to zero point, its initial stage or beginning before I apply functions to make it move, it goes to, say, (0,1) instead of (0,0) I think, after browsing google, the code segment:
if (Nadir=0)
zeropoint= true
then act ()
... move to (0,1)
I am assuming once the camera goes to its standby spot, (0,0) it reaches its zeropoint, and that makes the program divide by zero, thus making it erratic... I want to make it to where once it goes to its zeropoint, the program says, no, go here to prevent the error of dividing by zero... is it possible?
Why I have to place two parameters in the Verify constructor. If the numbers are being typed in by the user and passed through the validate method, what is the point of having them in Verify() ?
First, create three exception classes named NumberHighException, NumberLowException, and NumberNegativeException. Both NumberHighException and NumberLowException should be directly subclassed from the Exception class, but NumberNegativeException should be subclassed from NumberLowException. You can use the BadDataException class that was defined in this module as the model for your exception classes.
Next create a class called Verify that will be used to validate that a number is within a specified range. It should have one constructor that has two int parameters. The first parameter is the minimum number in the range, and the second parameter is the maximum number in the range.
In addition to the constructor, the Verify class should have one method that is named validate. The validate method should have a single parameter of data type int. The parameter contains the number that is being validated. If the value of the parameter is less than zero, the method should throw a NumberNegativeException. If the value is less than the minimum value of the range, it should throw a NumberLowException. If the value is greater than the maximum value of the range, it should throw a NumberHighException. If the value is within the specified range, no exception should be thrown.
Once all of these classes are created, create the driver class called Program5. The driver class should instantiate a Verify object with a range of 10 to 100. It should then do the following:
-Prompt the user to input a number within the specified range. -Use a Scanner to read the user input as an int. You can ensure that an int was entered because the nextInt method throws an --InputMismatchException if any non-digits are entered. -Call the validate method to validate that the number is within the range. -Print an appropriate error message if the value is not within the range, or print the value if it is within the range.
I'm trying to have the program create a .txt file for me but it is not working properly. It just keeps printing the exception error "The file could not be found" and exits the program.
// This program asks the user for input for a name, phone number and notes up to 200 entries. // It stores every contact in a file. Type 'h' for help while running this program.
import java.util.Scanner; import java.io.*; public class Phonebook { static Entry[] entryList = new Entry[200]; static int numEntries; public static void main(String[] args) {
[Code] ....
After running the code, I go into my workspace folder and I see that the file was created. What to do because running the program will always print "could not find the file".
i want to list files from resources folder like this:
@ManagedBean public class galley implements Serializable { private List<String> list; @PostConstruct public void init() { list = new ArrayList<String>();
[Code] ....
but it give me a null pointer exception on fList .... The directory of resources is :
I was giving a quick skim to some tutorials on the internet where I have found the exception that is handled is also declared in the throws clause of the method wrapping the try-catch block. For a code representation consider the following:
public void methodName() throws IOException { try { ... } catch (IOException ex) { .... TODO handle exception }
Right, so I got this program. It takes input from the user and assigns it to fields on an object. But, it's meant to check the users input. If the user enters bad input, it's supposed to throw this exception. For each of these exceptions, theres a class specifically for it.
public class PayrollDemo { public static void main(String[] args) { Payroll pr = new Payroll ("Test Name", 234); System.out.println("Current Employee Information. "); System.out.println("Name: " + pr.getName()); System.out.println("ID: " + pr.getID()); System.out.println("Hourly Pay Rate: " + pr.getHourlyPayRate());
[Code] ....
And this is the exception class.
public class InvalidNameException extends Exception { /** No-arg constructor */ public InvalidNameException() { super("Invalid name"); } }
PayrollDemo.java:43: error: cannot find symbol InvalidNameException.InvalidNameException(); ^ symbol: method InvalidNameException() location: class InvalidNameException 1 error
It's just meant to tell the user that they entered an invalid value, which would mean if they entered an empty string instead of a name.
I have a program which runs perfectly fine in Eclipse. however, the same program after exporting to jar in desktop and then executing in cmd gives exception.
why is this difference.
in eclipse. it is built up 1.6 JDK and run using 1.6 JRE.
in CMD, it runs by 1.7 JRE.
can this JRE version make a difference. Technically should not i believe.
value1 = text1.getText(); value2 = text2.getText(); Connect c = new Connect(value1,value2); if(c.check()== true) { Menu start = new Menu(c.getID()); dispose();
[code].....
I get an error "unreported exception java.SQLException; must be caught or declared to be thrown" how can i solve this I have taken a few basic classes but never got to exceptions.
I want to encrypt and decrypt a txt file by using PGP.I completed my PGP Encryption.I'm getting an error in PGP Decryption. The error msg as follows
Quote:
Exception in thread "main" java.lang.IllegalArgumentException: Invalid PGP message at com.newpackage.bouncy.PGPUtils.getDataList(PGPUtil s.java:502) at com.newpackage.bouncy.PGPUtils.decryptFile(PGPUtil s.java:198) at com.newpackage.bouncy.PGPFileProcessor.decrypt(PGP FileProcessor.java:56) at com.newpackage.bouncy.Tester.testDecrypt(Tester.ja va:46) at com.newpackage.bouncy.Tester.main(Tester.java:61)
I am getting this error in the following line of my code.
PGPObjectFactory factory=new PGPObjectFactory(PGPUtil.getDecoderStream(is)); =>> Object obj=factory.nextObject();//here i am getting obj as null if (obj == null) { //System.out.println("Invalid PGP Message"); //System.exit(0);
So I've been working on this program to make tournament matches for beach volley.
First little info: (I'm Belgian so some words are Dutch) -Class Speler: has arraylist with information with which player already has been played (codesLijst) -Class Inschrijvingen: makes players sign up with their level and name -Class Wedstrijd: makes matches, checks with Inschrijvingen if the players already have played together. If so, gives message that they need to change partner. If not, makes them a team.
Now if I run the program with fresh players, none of them have had a partner, it works fine. If I make just one new team and the other already exists, it also works fine. It's when I make the two teams with existing records (to see whether they already played together), that the error comes.I know there's a lot of code duplicate, will clear out eventually, this is just a raw version.
CLASS SPELER
import java.util.ArrayList; public class Speler { private Wedstrijden wedstrijd; private Inschrijvingen inschrijving; private String naam, ploeg; private int setPunten, winPunten; private long time; private String code; private ArrayList<String> lijstCodes = new ArrayList<String>();
public static void main(String[] args) { float y = 7 * i; } }
It gives : Exception in thread "main" java.lang.NullPointerException : Line 5...Why is it giving NPE? Isnt the variable defaulted with 0.0f? Also, I am not performing any dot operation, it's just a multiplication operation.
i rewrote this code from head first java book . but every time i try to compile it it gives me this exception
java.lang.ExceptionInInitializerError Caused by: java.lang.RuntimeException: Uncompilable source code - simpleFrame is not abstract and does not override abstract method actionPerformed(java.awt.event.ActionEvent) in java.awt.event.ActionListener at simpleFrame.<clinit>(simpleFrame.java:6)
how can i instantiate simpleFrame class if i shoild make it abstract?
public class simpleFrame implements ActionListener{ JFrame f; public static void main(String[] args){ simpleFrame s = new simpleFrame();
Im creating a program that has about 20 different input forms. Fairly standard forms but what i need to know whats the easiest way of creating forms. Is there some way of using templates or some plugin to quickly generate forms.
I am having trouble developing a 4x4 grid that has the letters A-Z and a-z and the corresponding ASCII numbers for each letter. I have created the code to retrieve these letters and their corresponding ASCII numbers, I only am having trouble with creating the grid and displaying these numbers and letters in their separate 4x4 grids: one grid for (a-z), one grid for (A-Z), one grid for (ASCII# a-z), one grid for (ASCII# A-Z).
Empty the following csv table to a map, where the key is a calendar, and the value is arraylist. The table represents the sock values of Google fro a period of time.
"Date,Open,High,Low,Close,Volume,Adj Close 12/8/2014,527.13,531,523.79,526.98,2323000,526.98 12/5/2014,531,532.89,524.28,525.26,2552700,525.26 12/4/2014,531.16,537.34,528.59,537.31,1388300,537.31 12/3/2014,531.44,536,529.26,531.32,1274500,531.32 12/2/2014,533.51,535.5,529.8,533.75,1521600,533.75
[Code] ....
----------------------------------------------- import java.util.*; public class Mymap { public static void main(String[] args) { Map<String,List<String>> map= new HashMap<String, List<String>>(); map.put());
I'm new to Web Services and I've been finding trouble when creating my first one. Before talking about the problem, I'd like to show you the process I followed to see if it's ok. Note that I'm using Eclipse Kepler, Tomcat 5.5 and Axis2.
1- I created a new Dynamic Web Project.
2- I created the Java class that implements the service with just one method, a simple one: you pass it a name and it returns "Hi, <name>"
3- Right click over that class and then: Web Services -> Create Web Service
4- I go through the next steps. On the last one, I select "Launch the Web Services Explorer to publish this Web service to a UDDI Registry". Click on "Finish".
5- The Web Services Explorer is launched, but I just get a "HTTP ERROR: 500" message.
I understand that my Web Service wasn't published and therefore it's useless to create a client as it wouldn't connect.
I have studied that Generics are used to shift the Class Cast Exception into Compile time errors , So that we get errors at compile time error and we do correct them before executing ,but Here is a program in which i am getting Class Cast Exception
class Animal { } class Dog extends Animal { } class Cat extends Animal
[code]..
Getting Exception at line no 29 which i know why it occurs but just wanna ask that isn't it should be caught at compile time According to Generics ?
Is there any connection between packages and exception handling in java. Means is it necessary to create a package before trying exception handling examples?
Is there a special mechanism through which exception can be handled in a constructor?
Suppose while creation of an object there occurred an exception while creating an object, and the object is half constructed. How do we make sure we handle this kind of exceptions in a constructor?
I am trying send email .So I have downloaded javaEE and javamail jar files and added buildpath.And wrote this code below .But I am getting this exception.
