If I want to read my file line by line and when it hits a certain value from that point it should start deleting the lines until the tag ends.Just curious will my code actually work at the moment or not because it goes through so many times then goes straight back to the variable declarations at the start of the method and never hits the console print line.
public void removeEnvironment(){ //declare variable to environment id String environmentID = "Environment id"; String lines = null; boolean lineFound = false; boolean end = false;
01. pickup the selected text file and read the line by line and output the text in to visual text pane.
what i did:.
01. I wrote code that read the text file and output in to jave console/ also some of the interface.
the code read txt file:
Java Code:
String fileName = "C:/Users/lakshan/Desktop/lawyer.txt"; File textFile = new File(fileName); Scanner in = new Scanner (textFile); while(in.hasNextLine()){
[code]....
so it will read any text file dynamically and output to the text pane in interface. I think scanner code must be execute after the select the file from the browser and set the scanned result in to variable. then later out put the var as string in some jswing component?
I'm trying to print the information entered into my TimeClockApp to a text file named timeclock.txt. Everything is writing to the text file, except instead of adding each part of the run through the app to one line, it is saving each part on a separate line like this:
i 3 2014/06/08 15:32:29
To ensure that each run through the time clock is recorded on a different line in the text file, I want it to add each item like this instead:
i 3 2014/06/08 15:32:29
I have tried to execute the
out.println(timeClock.get(i)); line as out.println(timeClock.get(i) + " "); and out.println(timeClock.get(i) + " ");,
but have had no luck in fixing this problem. My current code that writes the information to the text file is as follows:
// write items to timeclock.txt file try { // open an output stream for overwriting a text file PrintWriter out = new PrintWriter( new BufferedWriter( new FileWriter(fileName))); // (filename, true) when
How to output text to a file, so I had to do my own research on google, but the results I found were confusing. I finally got my code to write to a file, but I cannot figure out how to append a new line. I know what part of the code is incorrect, but I don't know how to fix it. here is what I have right now:
import java.io.IOException; import java.nio.file.Files; import java.nio.file.Paths; import java.util.Scanner; public class highscore { public static void main(String[] args) throws IOException {
[Code] ....
I can see the last two lines are telling the program to overwrite the first input with the second. Of course if I pick a different file name for the second output, I get another file with the second input, but I need to learn how to append as well.
I have a code that imports a text file [URL] .... and has a variety of methods for sorting through it. The file is structured differently when loaded into the environment, as each line begins with a movie and lists all of its actors. Each line has a movie title, then its release date in parentheses, and then the actors in the movie all listed and separated by slashes (Ex: /lastname 1, firstname 1/lastname 2, firstname 2/etc.....
Well I tried to create a method to search all the actors in the file for an inputted word and return the ones that have that word somewhere in their names. I managed to get it to work, but the code only runs for one line of it. How should I get this to do what its doing, but for EVERY line?
So I'm trying to read 11 values from a text file, each value on a separate line. The first value I use as loop control to run through calculations on the other ten and finally output both the numbers and the calculations to the console and an output file. I'm not getting a compiler error or a runtime error but my loop seems to stop after reading the first line. It also doesnt seem to be writing to my output file but does create it when I run the program. This is what my text file looks like
import java.util.*; import java.io.*; public class assignment7scratch { Toolkit_General toolKit = new Toolkit_General(); public static void main (String[]args)throws IOException
[Code] .....
so I dont get an error but this is what my output looks like
----jGRASP exec: java assignment7scratch
This program reads a list of values representing number of miles driven by individuals. It will output the dollar amount their rental cars cost.
Number of miles traveled on the left as well as amount reimbursed on the right
----------------------------------------------- Miles Driven Amount reimbursed 150.427.072
----jGRASP: operation complete.
it also doesn't write anything to my output file, though it does create one.
I know how to append text to a File using the true argument but I would like to be able to append to a certain line In the file.Basically I've made a simple html page with Image links to different sites. I'm trying to make an app that will take a new site as Input and append It to the html file before the </body> tags.
So basically, if a line in a text file contains a certain string, that specific line will be deleted. It should probably be similair to this method?
Java Code:
/** * Replace text. * @param replace * The text to replace. * @param replaceWith * The text to replace with. */ public static void replaceSelected(String replace, String replaceWith) { try { BufferedReader file = new BufferedReader(new FileReader("data/replacer.txt"));
I am having issues insert each line of the simple textfile into a specific varible I want it to go to. For example my text file is ordered like this
Dallas 78 F North, 15 mph dallasimage Denver 29 F South, 10 mph denverimage
and I want Dallas in city variable, 78f in temperature variable, and so on until text ends, at the moment is all goes into city variable, it all prints from there! I tried inserting it into an array but it would read all the lines previous to it in addition to reusing readline and all failed.
import java.io.BufferedReader; import java.io.File; import java.io.FileReader; import java.io.IOException; public class Textreader { public static void main(String[] args) {
I am writing to a text file via user input and it is saving all the user input to the file but it is just printing one word per line. I would like it to print the string on one line and print the next string on the next line upon them hitting enter.
public void textFile() { Scanner reader = new Scanner(System.in); System.out.println("Enter file name: "); String fileName = reader.next(); File f = new File(fileName); PrintWriter p = null;
I am trying to remove a line based on user input. myFile.txt looks like:
Matt Brian John
However when I enter "Brian" (to remove this line), It is deleted on the temp file (myTempFile.txt), but not renamed back to the original file (myFile).
I have a large text file of 1 GB size. I need to print the line when a matching word is found in a particular line. Below is the code I am using. But if there are many lines that has the matching word, it's taking lot of time. Any solution to print the lines much faster.
Scanner scanner = new Scanner(file); while (scanner.hasNextLine()) { String line = scanner.nextLine(); if(line.contains("xyz")) { System.out.println(line); } }
I have wrote this class who read from text line by line and save the words in fileOnTable.. Now i don't know what to read in ReadOffer to save the words in object offers and return this.. One more question.. What JUnit test can write for this code..?
Write a program that reads in a line of text and then outputs that line of text first in all uppercase letters and then in all lowercase letters.
INPUT and PROMPTS. The program prompts for a line of text as follows: "Enter the text: " and then reads in an entire line of text as a String .
OUTPUT . There are four lines of output . The first line is "The text in all upper case is: ". The second line is the line that was read in, displayed in all uppercase. The third line is "The text in all lower case is: " and the fourth line is the original line that was read in, displayed in all lowercase.
CLASS NAMES. Your program class should be called ShoutAndWhisper.
This is what I have so far:
import java.util.Scanner; public class ShoutAndWhisper { public static void main(String[] args) { Scanner scannerObject = new Scanner (System.in); System.out.println("Enter the text: "); scannerObject.next(); System.out.println("The text in all upper case is: ");
My requirement is to find the line number using multiline string. Here I need to extract the string between FROM and where clause(from the below string) and need to find the line number in the file
SELECT HL.LOCATION_ID,HPS.PARTY_SITE_ID,HCAS.CUST_ACCT_SITE_ID INTO LN_SITE_LOCATION_ID,LN_LOC_PARTY_SITE_ID,LN_CUST_ACCT_SITE_ID FROM HZ_LOCATIONS HL, HZ_PARTY_SITES HPS,
How do I make the file reader object move to the next line if there is no more input on the line. Here is my text and output file as you can see that my text file column cuts off on the 2nd line after 70. I want to read that next line which is 100 into my labs variable however its reading it into my final exams variable. I'll also post the code but I didn't think it was necessary.
textfile: 100908095 1008070 10070
output: Labs Projects Tests Final Exams 100908095 1008070100 70
[import java.util.Scanner; import java.io.*; public class MyGrades { public static void main (String[] args) throws IOException { int lab, project, test; int finalExam;//Par and Player values
If my file name is MyBigXMLFile.xml it won't delete but if I rename it to mybigxmlfile.xml it will delete. How do you get around the case sensitive issue?
I think the lines need to be stored in ArrayList, then I would like those lines to write to csv file, but how on read I can construct such output file? This is my code for reading file
public ArrayList readFile(String filename) { try {
I have a program that reads lines of text, but some of the lines of text aren't applicable and break the program. I'd like to put a letter in front of the lines in the .txt file I want to use, such as a #.
I need to make an if loop that'll check for the first letter on the line being #, and use the line in the program if true and skip if false. I'm guessing a boolean variable would be useful here to be true or false depending on the presence of #, but I don't know how to only read the first letter of each line, how can I do this?
Write a program that reads in a line of text and then outputs that line of text first in all uppercase letters and then in all lowercase letters.
INPUT and PROMPTS. The program prompts for a line of text as follows: "Enter the text: " and then reads in an entire line of text as a String .
OUTPUT . There are four lines of output . The first line is "The text in all upper case is: ". The second line is the line that was read in, displayed in all uppercase. The third line is "The text in all lower case is: " and the fourth line is the original line that was read in, displayed in all lowercase.
CLASS NAMES. Your program class should be called ShoutAndWhisper.
[import java.util.Scanner; public class ShoutAndWhisper { public static void main(String[] args) { Scanner scannerObject = new Scanner(System.in);
how to use SAX Parsers. I've looked at a few tutorials and have the generals down. I have an xml file that the parser is trying to read. As you see below, at the start of each element, I add the tag to an arrayList of the tags. I create a stringBuilder to capture the text between tags, this won't work unless it occurs at the end of an element. If it occurs at the start, it never gets the chance to read the text.
This is where the problem occurs. For nested tags, like project, it reads the last nested tags' text and stores it in the text arrayList. Project may be the first indexed tag in the tags arrayList, but project's text is the fourth indexed element of the text arrayList. So when my test print the arrayLists by index, it gets thrown off. I want over tags to store a blank space in the text array, and at the same index of the tag its associated with. How would I do this?
I've tried overwriting the text arrayList, but couldn't get my logic thought out for how to determine if a tag was nested. I always ended up overwriting blank space to each element.
I am trying to write a code where when I press Enter the text in the text box appear on next line of label. However every new text is getting printed on the same line..
Here is my code:
import java.applet.*; import java.awt.*; import java.awt.event.*; public class ChatBox extends Applet implements ActionListener { TextField firstNum, secondNum, resultNum; Label label1;
I'm currently learning Java and have been set an assignment that requires me to do the following:
Write an application that reads in a line length followed by individual lines containing text. No input line will be longer than the read in line length. In the text lines each word will be separated by a single space. The lines of text to be reformatted and then output so that the output lines of text have straight left and right margins. The last printing character in each line will be at character position (line length). In the text output the character '.' is to be used to represent the space character.
I'm trying to take this task on, but I'm unsure as to what exactly I'm supposed to do with part of it. For one of the methods I need to "work out how many extra spaces will need to be added to make the line width characters long.", how would I go about doing this?
I am trying to write to a file but everything I have tried doesn't seem to work. What I want to do is read a file and then output back to the same file on a new line. The text file contains the sentence "Java is a programming language".
import java.util.Scanner; import java.io.*; class HW1B { public static void main(String[] args) { Scanner fileIn = null; try { fileIn = new Scanner (new FileInputStream("text.txt"));
[Code] ....
These are the errors :
HW1B.java:19: error: no suitable constructor found for Scanner(FileOutputStream) fileOut = new Scanner (new FileOutputStream("text.txt")); ^ constructor Scanner.Scanner(Readable) is not applicable (argument mismatch; FileOutputStream cannot be converted to Readable) constructor Scanner.Scanner(InputStream) is not applicable
[Code] ....
Note: Some messages have been simplified; recompile with -Xdiags:verbose to get full output 2 errors
I am trying to read a file and input each line of the file into an array. I have not set the array size as I was hoping to fill the array using a while loop. Unfortunately the scope of the array does to work inside the while loop so I am being told that the array 'students' has not been initialised even though it has just outside of the while loop. Is it possible to do what I am trying to without having the array initialised in the while loop as surely the array will be reset every time if it was in the while loop? Here is my code:
public static void students(String file) throws FileNotFoundException { try { File studentInfo = new File(file); Scanner input = new Scanner(studentInfo); String[] students;
