I'm quite new to java programming, but eager to learn. I was wondering how to change actual java code, using user input. For example:
Java Code: int x = 0;
// Start the program and enter 3
// Now the code is
int x = 3 mh_sh_highlight_all('java');
This is the java code that I wrote for a password:
// java application that asks the user to enter a password
import java.util.Scanner; //program uses class scanner
public class password{
//main method used to execute java application
public static void main(String args[]){
//create scanner to obtain input from command window
[Code] ....
here is the output of the code when I run it :
entered the passwordreason
Try againPress any key to continue . . .
The code compiles without errors. The problem is when , I entered the actually password that I declared in my code, it doesn't output "You entered the correct password" but it instead outputs "Try again", which is supposed to be the output if you've entered the incorrect password. What did I do wrong?
I am creating a simple code in Java that replaces all tabs the user inputs with '*'. However, I am doing something wrong and I am not sure what. Here is what I have so far in Eclipse..
import java.util.Scanner;
public class ReplacingTabs {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
String s = "";
String s2 = "";
[Code] .....
There is an error with the s2 in the line String s2 = s.replace(' ','*');
I think I need to add String s2 to the loop but I am not sure how..
I have to do a small program about parking. In the 2-d array (parking lot), contains different kinds of cars, the user have to :
1)enter which car he wanna move,
2)what direction (w,a,s,d) and after that,
3) how many moves( not out of bound) he wants to make, and finally
4) we print out the new parking lot for his next move
And i am stuck at how to move the car to corresponding position and then prompt user for the next move?
For example:
I want to move A to the right by 1 (d)
擷取.PNG
print result:
擷取1.PNG
How do I do that? The code that i have right now
public class CarParkGame {
public static void main( String [] args) {
String carPark[][] = new String [6][6] ;
carPark[0] = new String[] {"A","A","A","0","0","0"};
carPark[1] = new String[] {"b","0","0","0","0","c"};
carPark[2] = new String[] {"b","X","X","0","0","c","<exit>"};
[Code] .....
I am trying to write a code that allows a user to input the number of stones in a basket, then put the stones in my pocket, after the stones are in my pocket, the stones must be taken out, one by one, and thrown in a pond. I get stuck at this part because my for statement has to subtract the number of stones in my pocket (one at a time) and add a stone to the pond (one by one) at the same time.I can get the pond stones to increase until the max amount of stones with the following:
for (int i = 0; i < stones; i++) {
System.out.println("Pocket:" ? " " + "Pond:" + i);
how to reduce one and add to other. Is it possible to do this in one for statement? I tried to put stones-- in place of the question mark, but that is not working.
Write a java program that will ask a user to input grades until the user inputs the sentinel value -1. The program should test each input to determine whether 0<=grade<=100. If the grade entered is within this range, the program should print "Grade accepted;" if not, the program should print "Invalid input".
View Replies View Related Is it possible to launch windows, specifically 8.1, directly into a java based program which would serve as the password entry screen? That is to say, instead of using the standard windows screen, could a java based alternative be used?
I have the source code used on jurassicsystems.com. I would absolutely kill to have a tweaked version of this system act as my password entry screen. It is literally something Ive wanted to have done for ages, and this emulation finally means it may be possible.
Is it possible to get data directly from request object in service method of servlet than why it is not possible to write directly into response object through service method instead of this we have to take PrintWriter or ServletOutputStream class object....
View Replies View RelatedWrite a java code that asks the user for an Integer and then counts down from that number to 0. Printing each number. For example:
Enter an Integer: 5 (enter) <--- user hits the enter key
5
4
3
2
1
0
import java.util.Scanner;
public class Exam{
public static void main(String args[]){
Scanner in = new Scanner(System.in);
With my code the menu runs. But when the user has typed in the name of a fruit (to reserve it) I'd like it to say 'Reserved' when the user then presses 'V' (to go and view all fruit)I have read Oracle Java Collections Arraylist and from my understanding I either have to code using the get method or equals method but I'm not too sure how to (I did try though)
import java.util.ArrayList;
import java.util.Scanner;
public class FruitApril {
public static void main(String[] args) {
[code]...
How do i exit a java program is the user input is nothing "",This is my code
Java Code:
import java.util.Scanner;
public class MyQueue<T> implements Queue<T> {
private T[] ringbuffer;
static int capacity = 0;
int mysize = 0;
[code]....
URL....So the problem is that when I type in "PA" it will display about 24 Zips and Populations before it stops. The problem is in the ZIPs file. It goes down the list and then takes the Zip from the Zips file to the Zips in the Population file and displays the Population. It will go to population 513 and stop. Reason being, there is no ZIP code in the Population file to display a population. The loop then stops. How can I get the program to skip over the zip code when there is no corresponding ZIP code in the other file and continue showing the other Pops..Here's what I currently have completed:
import java.io.File;
import java.io.FileNotFoundException;
import java.util.Scanner;
public class Population {
//Declaring global variables.
Scanner fileScannerZip, fileScannerPop, inputFile;
private String lineZip, linePop;
int invalidZip;
[code]...
I need to create a Java program that takes an input a color code in HSV and outputs the equivalent RGB code and Vice versa.
Example:
If you test on the color RED in RGB:
Input: (255,0,0)
Output: (0,100%,100%)
If you test on the color RED in HSV:
Input0,100%,100%)
Output: (255,0,0)
I am designing a program in-order convert Binary to Decimal values with added features:
Rejecting binary values longer than 32 bits
Prompting the user to make multiple entries after completing the binary to decimal conversion of their first entry. I was trying to code this in Nested For Loops, but I don't know if I've really done that.
Here is what i have so far.
public class BinaryToDecimal {
public static void main(String[] args){
Scanner scan = new Scanner(System.in);
String binary;
int decimal=0b10, i, rem;
boolean isBinary = true;
[Code] ....
Write a program that prompts the user for an input number and checks to see if that input number is greater than zero. If the input number is greater than 0, the program does a multiplication of all the numbers up to the input number starting with the input number. For example if the user inputs the number 9, then the program displays the following sum:
9 * 8 * 7 * 6 * 5 * 4 * 3 * 2 * 1 = 362880
That's the question I'm getting and so far all I've got is
import java.util.Scanner;
public class Lab4Q3
{
public static void main (String[] args)
{
int keyboard;
[Code] .....
I am trying to write a program that will generate a QR Code from an input text and also display some information about the input/output bits. So far I have created the frame and what to do next. And I'm not sure if I am on the right track since my level of programming is not that great. By the way, I am using zxing libraries from GitHub. I know, there are plenty of generators online for the QR Code, but that is not what I am looking for. As you can see on the attached image, I am more interested in the efficiency of encoding 2D data. Also, I noticed that almost all the online projects regarding 2D codes are for Android. Which is not very useful.
// QR Code Generator
package qrcode;
import javax.swing.JFrame;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTextField;
import javax.swing.border.EtchedBorder;
import javax.swing.border.TitledBorder;
[Code]....
Write a Java program that randomly generates a five-digit lottery number and prompts the user to enter a five-digit number. Each digit in the number is in the range between 0~9. The program should determine which prize the user wins according to the following rule:
• The user wins the first prize if the user input matches all five digits in the lottery number in exact order.
• The user wins the second prize if the user input matches any four digits in the lottery number in exact positions.
• The user wins the third prize if the user input matches any three digits in the lottery number in its exact position.
• The user wins the fourth prize if the user input matches any two digits in the lottery number in its exact position.
• The user wins the fifth prize if the user input matches any one digit in the lottery number in its exact position.
and here is my code. I cant get it to print the right statements.
import java.util.Scanner;
import java.util.Random;
class Hw5 {
static int getPrize(int g1, int g2, int g3, int g4, int g5,
int u1, int u2, int u3, int u4, int u5) {
//code for determining the prize comparing (g1, g2, g3, g4, g5) to (u1, u2, u3, u4, u5)
if (u1 == g1 && u2 == g2 && u3 == g3 && u4 == g4 && u5 == g5)
[code]....
I have been struggling with this program for weeks. This program is supposed to take a user's inputted odd number and then print out all prime numbers lower than that number.
public class PrimeNumber
{
Scanner scan = new Scanner(System.in);
int userNum;
String neg;
public void getUserNum()
[code]...
I am having problem with the JRadio Buttons to change the font color in my code. What needs to be done? Also if I were to connect this GUI to another GUI and save font colors, how would I go about that?
package SystemandDesign.RISK;
import java.awt.FlowLayout;
import java.awt.Font;
import java.awt.Color;
import java.awt.event.ItemListener;
import java.awt.event.ItemEvent;
import javax.swing.JTextField;
import javax.swing.JRadioButton;
import javax.swing.JFrame;
import javax.swing.ButtonGroup;
[code]....
I am currently working on a small java programm. I use netbeans for it. And obviously I am new to java.
Basically its a calculator that change the input value into another value: like 10 € into whatever $ and same with Inch and Centimeters.
Therefore I need a second jDialog Form where i can change the factors for the calculator and start the calculator again.
Here is my problem: I can open the second Dialog but if I want to change the factor it doesn't change the value in the variable and the second calculator frame is with the old factors. It seems the double variable isn't working globally
I will add the files later when i find out how?
When in panel2 i type something in the search bar and then i move mouse cursor to panel1 and try to edit a JTextField input for example as in the picture 0.0 nothing happens but the mouse cursor is correctly show up in the JTextField.. What seems to solve the problem is to click anywhere outside of the application window.. but of course this is not a solution !
View Replies View RelatedString name = "Aaron";
String whatToChange = "name";
String verifyNameChange = "";
boolean changeName = false;
if(whatToChange.equals("name")){
while(!changeName){
[Code] ....
I've been working on a small text-based RPG for fun. This particular part is supposed to allow the user to change their name. Now, the problem is that when they reach the option to change their name, the above code seems to skip the line:
name = scan.nextLine();
It will erase whatever the player previously entered for their name, as well. So it will print out:
Okay, let's change your name. What did you say it was? Alright, so you'll go by . Is that correct? [now allows input for verifyNameChange]
The above code works fine on it's own, but somehow messes up when put into the full program. I don't want to post the whole program, because it's fairly large. But the String name is set and functions fine before this bit of code.
I am trying to change an input String to an array of characters, but it only stores the word before the space into the array. Here is the code:
Scanner scanner = new Scanner(System.in);
System.out.println(" Enter text: " );
String text = scanner.next();
char[] characterArray = text.toCharArray(); // convert string to array of characters
String char = "";
for( i = 0; i < characterArray.length; i++) {
char = char + characterArray[i]
} System.out.println(char);
Just typing hello gives me hello, but when I type hello world it does not type in the word "world".I am trying to change an input String to an array of characters, but it only stores the word before the space into the array.Here is the code:
Scanner scanner = new Scanner(System.in);
System.out.println(" Enter text: " );
String text = scanner.next();
char[] characterArray = text.toCharArray(); // convert string to array of characters
String char = "";
for( i = 0; i < characterArray.length; i++) {
char = char + characterArray[i]
} System.out.println(char);
Just typing hello gives me hello, but when I type hello world it does not type in the word "world".
Where do I input this segment?
Scanner user_input = new Scanner( System.in );// This line goes at the top with the other global variables
public void getUserInput(){
System.out.print("Enter litres: ");
litres = user_input.nextDouble( );
System.out.print("Enter mileage: ");
mileage = user_input.nextDouble( );
System.out.print("Enter speed: ");
speed = user_input.nextDouble( );
[Code] ....
This is my client file.
class Client{
public static void main(String []args){
Bike R1=new Bike(5.0, 60.0,30.0);//create bike object with params
Bike R2=new Bike();//without params
System.out.println(R1.increaseSpeed());//calling methods
System.out.println(R1.maxDistance());
System.out.println(R2.increaseSpeed());
System.out.println(R2.maxDistance());
}
}
I'd like to change the text on the two buttons which I have in my Dialog Box, how should I do this?
Also, when I click the X Button in the top right of the Dialog Box, nothing happens, and the program only stops when I end it in jGrasp. How do I make this button close the program when clicked on?
import javax.swing.*;
import java.util.Random;
public class SwingInputExample {
public static void main(String args[]) {
[Code] .....
I have a simple java program to write which tells the user combination of coins that equals to the amount of change i.e:
user input 87
output:
3 quarters
1 dime
0 nickels
2 pennies
How the program remembers the remainder which is passed to the next column of let say dime
i.e
originalAmount = amount;
quarters = amount /25;
amount = amount % 25; <---- this is confusing for me?!?! how can the integer = integer % 25
dimes = amount / 10; <--- HOW THE PROGRAM remembers the "remainder" instead of the original user input as the code it self tells you dimes = amount where "amount" is what user input NOT remainder.
amount = amount % 10;
so on ....;
What I don't understand is HOW this algorithm works. I mean we have int amount where user inputs the number we get the first calculation amount/25 = how many quarters and then amount %25 WILL tell us about the reminder. By looking at this piece of code I would say that the system should start the calculation for the dimes again from the original number since the code says dimes = amount/10 AND amount = amount%10. My understanding is that the calculation should be done from the original user input.
Book or code it self is not clear for me how the reminder is "REMEMBERED" and then pass on to the next calculation>!?!?
UNLESS the code: amount=amount%25 gets the remainder so the next code under it is REQUIRED to read from the last prompt code.