how to setup a program that simulates the progression of a line over time.The scenario involves a bank and 5 tellers. There is one line of customers that starts off with an initial length of 20. Every minute, 10 more customers are added to the line. As this is meant to be a FIFO queue the first 11 customers in the line will be distrusted among the 5 bank tellers as follows: Teller #1 will process 1 customer per minute, Teller #2 and #3 can each process 2 customers per minute, and Teller #4 and #5 can each process 3 customers per minute. Therefore, the first 11 customers in line will be processed within the first minute of the programs execution.
Unfortunately, I am not sure how to attack this thing. I am thinking that I need to setup a queue for the initial 20 customers and an array for the 10 customers that will be joining the line every minute. However, I am not sure how I can set this up to work automatically.
The following codes shows an implementation of an enqueue function of a FIFO immutable queue, and the output result shows the String "c". I don't understand why since I expected it should be null.
The head and the tail of an ImmutableQueue Object are two separate queue, and each time I call the enqueue function, it just return a new object with a new tail, however, the head is not modified except the first two times I call the function.
Therefore, I expected head.next.next should be a null element, but the result is not like that.
public class ImmutableQueue<E> { public Queue<E> head; public Queue<E> tail; public ImmutableQueue(){} private ImmutableQueue(Queue<E> hd, Queue<E> tl){ head=hd; tail=tl;
I have a class "ExecuteJob" which has Print Q in the form of Priority Q.
You can keep adding job to the Q by calling one of the method in the class. However, and object cant do things simultaneity can it? While im adding a new job to the print queue, can it be executing and existing job in the print Q.
To achieve that, I would need to implement process and threads? I believe am I right? So that adding a job is independent to being removed?
I have wrote this class who read from text line by line and save the words in fileOnTable.. Now i don't know what to read in ReadOffer to save the words in object offers and return this.. One more question.. What JUnit test can write for this code..?
My requirement is to find the line number using multiline string. Here I need to extract the string between FROM and where clause(from the below string) and need to find the line number in the file
SELECT HL.LOCATION_ID,HPS.PARTY_SITE_ID,HCAS.CUST_ACCT_SITE_ID INTO LN_SITE_LOCATION_ID,LN_LOC_PARTY_SITE_ID,LN_CUST_ACCT_SITE_ID FROM HZ_LOCATIONS HL, HZ_PARTY_SITES HPS,
How do I make the file reader object move to the next line if there is no more input on the line. Here is my text and output file as you can see that my text file column cuts off on the 2nd line after 70. I want to read that next line which is 100 into my labs variable however its reading it into my final exams variable. I'll also post the code but I didn't think it was necessary.
textfile: 100908095 1008070 10070
output: Labs Projects Tests Final Exams 100908095 1008070100 70
[import java.util.Scanner; import java.io.*; public class MyGrades { public static void main (String[] args) throws IOException { int lab, project, test; int finalExam;//Par and Player values
I was thinking to make a game where two cars are going to race against each other. I already have two gif pictures which are the cars. I do now have a background and a racer track. So we can start from here.
I have made a object with construction which I called Racers. Inside that, i wrote a PaintWindow (Where the window and much more is inside), -car1, -car2. All these is private. So I made something like this now:
package p2; public class Race { private Object window; private Car car1; private Car car2; public Race(PaintWindow window, Car c1, Car c2) {
[Code] .....
But the problem is now that im kinda lost and I dont really know what to write anymore. How can I get a for example a green background on the whole PaintWindow with two Racers tracks and inside the racers tracks (Each car have each track) does it have to be cars. So I need to somehow import the cars inside it too. But thats the problem I need. that I dont really know what more to do. To make it easier, I have a Main-method in another class.
public static void main(String[] args) { PaintWindow window = new PaintWindow(); Car c1 = new Car(new ImageIcon("C:/Users/Sarah/Desktop/CarBlue.GIF")); Car c2 = new Car(new ImageIcon("C:Users/Sarah/Desktop/CarRed.GIF")); Race race = new Race(window,c1,c2); race.action(); if(args.length>0) { Paintwindow.pause(2000); window.dispose();
I'd like to learn more in Java security, namly Kerberos and SSO. The question is weather I have too weak laptop. I have 8 GB ram. How many virtualbox instances od I have to run in order to JAAS, SSO kerberos demo to simulate. For instance VM with Windows 2008 Server -> 3 GB RAM, Centos VM -> 1GB. Is 8 GB RAM in my laptop not too little?
BTW
I do not have yet experience in SSO/Kreberos but I want to know what to do in order to simulate and exercise.
If I want to read my file line by line and when it hits a certain value from that point it should start deleting the lines until the tag ends.Just curious will my code actually work at the moment or not because it goes through so many times then goes straight back to the variable declarations at the start of the method and never hits the console print line.
public void removeEnvironment(){ //declare variable to environment id String environmentID = "Environment id"; String lines = null; boolean lineFound = false; boolean end = false;
I'm creating a program that searches a txt file for a given string, then return the number line and the line itself. However, my testFile class isn't detecting my searchWord methods.
The searchWord and recursiveSearch is written in a java class called BasicFile
public List<String> searchWord(String key) throws Exception { LineNumberReader lnr = new LineNumberReader(new FileReader(f)); return recursiveSearch(lnr.readLine(), key, lnr); } public List<String> recursiveSearch(String currentLineText, String key, LineNumberReader lnr)
[code]....
Is it because I'm using a list instead of a string?
I'm doing an assignment for uni and have come across a small hiccup. What I'm trying to do is scan in a text file and read "commands" for it line by line, E.g:
Student Mary 12345 19 Student Joe 12346 19 Change Joe 19 20 Change Mary 19 20
So that lines that begin with the word "Student" indicate that I should create a new student file with that name, student ID, and age.
"Change" indicates that I should be changing the specified student's current age to the new age etc.
What I'm currently doing is something along the lines of this:
Scanner input = new Scanner(new FileReader(args[0])); String[] line; while (input.nextLine().startsWith("Student")) { line = input.nextLine().split("s+");
[Code] ....
The problem I'm having is that every second line seems to be getting skipped (because I'm calling nextLine() so much?) but I can't think of a way to "peek" at the first word of each line without advancing past it. Is there any way of doing this?
I'm a student designing and developing an Air Traffic Control (ATC) system for incoming aircraft, mainly implementing the part which handles the queuing system for approaching aircraft.
So what I want to do is have a method that allows me to use the callRandomNumber method so that the matrix location with that random value is marked true for all of the boards.
I am writing a simple program to simulate a traffic light. What I want is to make them glow after each 1 second, one by one. For example: Firstly Red, then after 10 seconds, red will be put to off and yellow will start glowing and then accordingly green. This process shall continue incessantly (Just for experimental purpose). I have some arrangement done but could not figure out how to put them together in run() method of Runnable interface. I know how interthread communication works. But could not find any logic in this case when three threads will run together.
import java.awt.*; import java.awt.event.*; import javax.swing.*; public class TrafficLight extends JFrame implements Runnable { JButton red, green, yellow ; TrafficLight()
I'm very new to Java (I literally started learning it yesterday) and I've been working on a simple program that's meant to simulate interactions between optics objects and light rays.
Everything has been going really well, except that my mirrors only reflect the first ray that comes in contact with them.
Here's a screenshot : 2014-09-13 at 7.39.23 PM.jpg
I wrote 7 classes:
Main class to create the optics objectOptics class. the most important class that uses a recursive function to detect the nearest intersection point of a ray with the nearest optics object. It then calculates a reflected ray and inputs it back into the function until no intersections are found or the max recursion depth is met.Ray. creates a rays (in parametric form O + tD where O is the origin, D is the direction and t is a non-negative scalar)Object. empty abstract class used for polymorphism (so when i add more optics objects like prisms and lenses they'll share the object type)Mirror. Basically a line segment created with the Line classLine. Creates a line segmentDraw. JComponent with paintComponent function that loops through an array of shapes and draws them to the screen.
What I know so far is that the problem boils down to the checkRay() function in the Optics class. When a mirror has already reflected a ray, the line:
Intersection sec = new Intersection(ray,(Mirror)obj);
creates an intersection with a null point.
I debugged it line by line and found the problem was that my variable 't' (that is the parameter for the parametric line which represents the mirror) in the Intersection class got big values when it's meant to be between 0 and 1 (since it's a line segment), which resulted in the function returning null (as it should when 't' is not between 0 and 1).
I've confirmed with tests that this has nothing to do with the specific mirror or angle of incidence. It only occurs when a mirror has already been intersected with by a ray.
I've found out that my function:
public PVector getNormal(PVector D){ D.normalize(); return new PVector(D.y,-D.x); }
Changes the value of the 'D' PVector of the mirror inside my 'objects' ArrayList. How can it access the private PVector 'D' from outside the Mirror class? This normalization to the direction vector is what causes the Intersection class to return null the second time around!
The problem was that in the getNormal function, the input vector argument was a reference to the 'D' vector for the mirror in my 'objects' ArrayList so the .normalize() function acted upon the original vector, changing it's value and screwing things up. The two classes I talked about:
Optics: (note line 64. this line returns a null intersection when it shouldn't)
package ofer.davidson; import java.util.ArrayList; public class Optics { //Arrays to store all the optics objects and rays that are created ArrayList<Object> objects; ArrayList<Ray> rays;
I am making a elevator simulator for my class. It needs to be "event time". I am having trouble understanding how I can make an "event time" simulator. Initially I was using a while loop to run a clock time simulation of x seconds for each event, until I ran into a concrete wall and had to call another method which took X seconds, while still needing to execute code.
An example of what I did is:
Spawn person -> person.goToElevator (Takes x seconds) - > person.waitForElevator (Until elevator arrives, x seconds). While this is happening, I needed to create another person and do the same thing, this will add another to the queue if the first person is still waiting. Etc etc, you get the point.
We have not learnt about multi threading, that is the next assignment.
Here is a quote from my lecturer:
"That's right, it requires multi-threading which we're not doing in this paper. Here's a solution that can work:
The person waiting for the lift and then doing lots of other things should do all that in a fraction of a second. So, you don't let the person really wait. Instead, you will set a timestamp in the future in the person object that "he's busy till that time". In all other steps in your simulation you will first check if a person is "busy" (i.e. has a timestamp in the future). If so, you can't use this object, otherwise, you can.
How does it create a bigger queue? Outputs I would have in my final simulation would be, averageQueueLength, numOfPeopleInBuilding etc.
I am attempting to create a 2d game that has a realistic space simulation. The map is supposed to be set so that you are looking from the top down. The problem I am having exists in my interaction between the sun and a planet. Simply put, the planet will only move in a single diagonal direction without ever changing direction. The formulas I am using are F=(G*M1*M2)/D^2 and A=F/M. The code below is simplified.
Things I have already tried: 1. Setting G to negative 2. changing the order of the subtraction in determining D 3. some weird pythagorean theorem thing someone suggested
I need to do a simulation on the assembly code level by writing a mini-compiler for each ISA, i.e., 4, 3, 2-Address Architecture, Accumulator Architecture, Stack Architecture, and Load-Store Architecture.The input to the simulator is a segment of C program:The basic sample segments of C code are:
I think the lines need to be stored in ArrayList, then I would like those lines to write to csv file, but how on read I can construct such output file? This is my code for reading file
public ArrayList readFile(String filename) { try {
01. pickup the selected text file and read the line by line and output the text in to visual text pane.
what i did:.
01. I wrote code that read the text file and output in to jave console/ also some of the interface.
the code read txt file:
Java Code:
String fileName = "C:/Users/lakshan/Desktop/lawyer.txt"; File textFile = new File(fileName); Scanner in = new Scanner (textFile); while(in.hasNextLine()){
[code]....
so it will read any text file dynamically and output to the text pane in interface. I think scanner code must be execute after the select the file from the browser and set the scanned result in to variable. then later out put the var as string in some jswing component?
