I am not sure what is happening with my code, but it is giving me a negative number. I am trying to write a program that calculates the product of the odd integers between 1 and 25. I messed with the program and as soon as you enter a number over 22, the end result is a negative number.
int total = 1;
for (int i = 1; i <= 25; i += 2){
total *= i;
}
System.out.println("Product:" + total);
Write a function that accepts an array of non-negative integers and returns the second largest integer in the array.
Return -1 if there is no second largest.
The signature of the function is int f(int[ ] a)
Examples:
if the input array isreturn{1, 2, 3, 4}3{{4, 1, 2, 3}}3{1, 1, 2, 2}1{1, 1}-1{1}-1{}-1
In the signature what I understood is, I should write my function with the given signature,
The return type is "int"
method name is "f"
parameter is "a" right ?
Writing my doubts beside the particular line in the code
public static void main() // In the answer why they didn't use the class ?
In main method why they didn't use parameters ?(String[] args)
{
a1(new int[]{1, 2, 3, 4}); // what is "a1" here is it array name ? this line initializing the array ?
a1(new int[]{4, 1, 2, 3});
a1(new int[]{1, 1, 2, 2});
a1(new int[]{1, 1});
a1(new int[]{1});
a1(new int[]{});
}
static int a1(int[] a) // what is "a" here parameter ? and "a1" is method name ? why they used the array name and method name same ?
{
int max1 = -1;
int max2 = -1;
for (int i=0; i<a.length; i++)
[Code] .....
What I am trying to do here is allow input to loop until 0 is entered for the product number. When 0 is entered, it should then dump the total for each individual product. I've tried it about a dozen different ways and have yet to be able to get the loop to function as intended. The way I have the code below, the loop will not function at all (where as before it looped, but never finished).
import java.util.Scanner;
public class Sales {
public static void main(String[] args) {
double total1=0.0;
double total2=0.0;
double total3=0.0;
double total4=0.0;
double total5=0.0;
int product;
[Code] ......
I am 4 weeks into my Intro to Java course and I am having a bit of trouble with my code. I need to make a program that will take a user inputted number, space the numbers out, then add them to a total sum. What I am having a hard time with is when I enter a negative number. I can't figure out what I need to do to have my program ignore the "-" in the string.
import java.util.*;
public class Week4_Programming_Problem
{
static Scanner console = new Scanner(System.in);
public static void main(String[] args) {
int number, digit, sum=0;
char digitPos;
[code]....
I am trying to raise a real number to a negative value e.g x-y(x raised to power -y) which can also be written like 1/xk . I am trying to run th program each time bt it doesnt give me the desired result.
Here is the code
public class RaiseRealPower {
public void run(){
double value =readInt("Enter value ");
double power =readInt("Enter power ");
System.out.println("Answer is " +raiseIntToPower(value,power));
[Code] ....
Ask the user to enter a sequence of at most 20 nonnegative integers. Your program should have a loop that reads the integers into an array and stops when a negative is entered (the negative number should not be stored). Invoke the average method to find the average of the integers in the array (send the array as the parameter).
how can I remove the negative number from the array and calculate the average of the posive elements without the negative ones? This is my code so far...
import java.util.Scanner;
import javax.swing.JApplet;
public class Parameters
{
//-------------------------------------
//Calls the average and minimum methods
//with different numbers of parameters
[code]....
i am writing a program that would be used for ticket sales and their are 100 tickets and a person can only buy 4 at a time. i need my program to not go negative at the end and also i need to stop the user from entering a negative number.
import java.util.Scanner;
public class ticketmaster {
public static void main(String[] args) {
// Variable decoration uses strings , doubles and final doubles.
Scanner in = new Scanner(System.in);
[code]....
i am writing a program that would be used for ticket sales and their are 100 tickets and a person can only buy 4 at a time. i need my program to not go negative at the end and also i need to stop the user from entering a negative number here is the code.
import java.util.Scanner;
public class ticketmaster {
public static void main(String[] args) {
// Variable decorationuses strings , doubles and final doubles.
Scanner in = new Scanner(System.in);
[code]....
I am trying to make a method that generated a random number between two values that can be negative or positive.
So:
rand(-0.2, 0.2);
would give one of these: -0.2, -0.1, 0, 0.1, 0.2
Basically i have a question ask me to write a program that read integer from keyboard until a negative number is entered, and then print out the max and min out of the number i have entered.
This is what i have done already which works, but i need to ignore the negative number when print out max and min...which i dont know how to do so. when i compile this program now it will always give me the negative number i enter at the end as minimum. which i need to ignore
Also if negative number is entered at once the program should print a error message say max and min are undefined.
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
int large = Integer.MIN_VALUE;
int small = Integer.MAX_VALUE;
while(true) {
System.out.print("Enter a integer: ");
int n = in.nextInt();
[Code] ....
I do now have the problem where i have to insert the numbers 1 to 100 individually in order to allow the program to accept a grade as high as 100%.
Also as soon as i type in a negative number the system crashes and shows me a error as attached.
/*
Averaging grades
To use the Java Swing interface to calculate the average of up to 50 grades.Average is calculated once -1 is entered as a value. The grades are then sorted from lowest to highest and displayed in a content pane which also displays the average.
*/
import java.awt.*;
import java.awt.event.*;
import javax.swing .*;
import javax.swing.text.*;
public class Averages extends JFrame {
//construct components
JLabel sortPrompt = new JLabel("Sort By:");
[Code] ....
Ok so I have my program working for the most part. In this program I am supposed to take input from the user until they enter a negative number and that works, the problem is that it doesn't work if I enter a negative number on the first prompt. For example if I enter a 100 it would prompt me again and if I enter a negative number it would quit and give me the average, but if I enter a negative number the first time I am prompted the program just gives me an error. How do I fix that?
import java.util.List;
import java.util.ArrayList;
import java.util.Scanner;
public class Application {
public static void main(String [] args){
Scanner input = new Scanner(System.in);
List<Integer> grades;
[Code] ....
In my cs class, we have to write a program that throws an exception if the user enters a negative number, the program should prompt the user to enter only positive numbers and then let them retype the number. But everytime I throw an exception, my program gets suspended.
What am I doing wrong, or is there no way to continue a program if an exception is thrown? Does the program automatically get suspended when an exception is thrown?
try{
do
{
N = kb.nextDouble();
if(N<0) {
throw new NegativeArraySizeException();
}
else
j++;
}
while(j==0);
fill.size(N);
}
catch(NegativeArraySizeException e) {
System.out.println("The number you entered must be positive. Please try again.");
}
Write a program to find the number of and sum of all integers greater than 100 and less than 200 that are divisible by 7.
View Replies View RelatedI wrote this simple piece of code to find the number in the given array of Integers. The program works fine although it shows a couple of errors when i modify it a little bit.
public class DemoLabel{
public static void main(String [] args){
int[][] arrofInts={
{32,45,67,87},
{23,44,55,66},
{12,47,87,56},
{23,44,12,78}
[Code] .....
In the disp() method,Suppose i only want to pass two arguments i.e disp(i,j) given that searchFor variable is visible in the entire class but when i use disp(i,j) i get the following error
DemoLabel.java:38: error: cannot find symbol System.out.println("The number "+searchFor+" is at the location"+i+" , "+j);
^
symbol: variable searchFor
location: class DemoLabel
So i decided to declare the
int searchFor
as
public int searchFor
But the compiler threw another error saying that it was a Illegal start of expression
Also,when i add a SOP line after the label search: it shows the error
DemoLabel.java:25: error: undefined label: search
continue search;
^
Although i got the program to work it would be useful if i could understand why it doesn't work with the modifications.
Write a program to find the number of and sum of all integers greater than 100 and less than 200 that are divisible by 7.
View Replies View RelatedI have to organize the rows from the lower to the higher number, the problem is, what I have only organizes the first 3 rows even If I insert 3,4,5...or 10 rows.
int arg[][] = {
{26, 39, 3, 13},
{22, 97, 17, 123},
{46, 19, 63, 123},
{1, 37, 90, 32},
{17, 37, 90, 32}};
for (int i = arg[0].length - 1; i >= 0; i--) {
for (int j = 0; j < i ; j++) {
for (int k = 0; k < i ; k++) {
if (arg[k][j] > arg[k][j + 1]) {
int temp = arg[k][j];
[Code] ....
Write a recursive Java method countDigitx that takes two integer numbers as input (a number n and digit x) and returns the number of times digits x occurs in number n:
For example if n=23242 and x=2 then the method should return 3 that is the number of times the number 2 found in n.
Write a method maxOccurrences that accepts a list of integers as a parameter and returns the number of times the most frequently occurring integer (the “mode”) occurs in the list. Solve this problem using a map as auxiliary storage.
If the list is empty, return 0.
I have the following code Java (is it just a meaningless example ), my question is: if I wanted to insert a code to multiply two fraction into moltiplicaPer() metod What should I write?
public class Frazione {
private int num;
private int den;
Frazione() {
num = 0;
den = 1;
[Code] ....
I was having trouble printing the product of the array I am getting runtime errors. Here is part of my code
int [] grades;
grades = new int [10];
grades [0] = 100;
grades [1] = 100;
grades [2] = 100;
grades [3] = 100;
grades [4] = 83;
[Code] ......
The question is when you send two messages from the client to the server does the server read the messages as one input or do you have to read both inputs on the server side?
Im using DataInputStream and DataOutputStream
On the client side I send two messages one for the database action to be performed and the send is the information needed to get the job done.
Example I want to search for a product in the database.
I send to the server an output message saying search product. I then send to the server which product I want to be searched.
The server then retrieves the message by in.readUTF(); switch statement determines what database action should be performed. Within that case I call another in.readUTF() to pass the information to the database on what product to search for.
Would this work or would the server read both messages from the client as one input stream?
I am working on the following simple question of Java: "Write a program called Product1ToN to compute the product of integers 1 to 10 (i.e., 1,2,3...10). Try computing the product from 1 to 11, 1 to 12, 1 to 13 and 1 to 14. Write down the product obtained and explain the results."
public class HelloWorldApp {
public static void main(String[] args) {
int lowerBound = 1;
int upperBound = 10;
int product = 1;
[code]....
why the code gives unexpected results?
Below is current process :
We have an application running successfully where we fetch the weight of product currently on Production Line using Java.
All the products on line belong to same order and are of same type.
User at beginning enter the type of product and starts the production line.
Proposed new process: Now client want that multiple type of product can belong to same production order. i.e. on a production line different type of products can come one after other. So we should now fetch the type of product also.
The Question : what are different possibilities in which we can find the type of product. Can java fetch color of a box ? If we use scanner on line that scans the product and sends the color information to Java.
Above is just a possibility. Can there be any other parameters that Java can use to differentiate in type of product ?
Currently we are clueless. What ever are the possibilities in Java we can propose the same to client. Even if that requires additional hardware.
I wanted to know if I was off to the right start. I am trying to write a program using the for loop the calculate the product of the consecutive numbers 4 through 8 but so for I am getting 3 values output and I only want 1 value at the print out.
The code I am using outputs the numbers too large. I am trying to see where I went wrong.
for ( int i = 4 ; i <= 8; i++)
{
int j = i++;
int k = j++;
int l = k++;
int m = l++;
System.out.println( + (i*j*k*l*m) );
}
My problem is that in my program, I have the user input data for one of three product objects, however when I read the data for all three objects, the same data is stored in all of them.
Anyway this is the method from the Interface class:
private void readInput() // the only method in the program that accepts product data from the user {
Store matesStore = new Store();
String name;
int demandRate, productChoice;
double setupCost, unitCost, inventoryCost, sellingPrice;
Scanner console = new Scanner(System.in);
[Code] ....
And here is the method from the Store class:
public static void addData(int option, String newName, int newDemand, double newSetup, double newUnit, double newInventory, double newPrice)
//sets the product data for a particular product {
if (option==1) setData(product1, newName, newDemand, newSetup, newUnit, newInventory, newPrice);
else if (option==2) setData(product2, newName, newDemand, newSetup, newUnit, newInventory, newPrice);
else /*(option==3)*/ setData(product3, newName, newDemand, newSetup, newUnit, newInventory, newPrice);
[Code] ....
The problem I had was with static variables and methods.