Getting User Input From TextArea And Storing It As String Value
Jan 20, 2015
I am having trouble with getting a user input once they enter it in to a JTextArea and then storing it in to a string value. See, I wanted the user to enter an answer in to the JTextArea, and then once I store it in to a string value, I would be able to use it later. I wanted to after storing the variable to print it on to a JLabel, but nothing is showing up... Heres my code.
static String usera[]= new String [10];
for (int i=0; i< usera.length; i++) {
//These are the JTextArea names
usera[0]= Question1.getText();
usera[1]= Question2.getText();
[Code].....
I already initialized the JLabels earlier in my code, and I did not feel the need to post all my code here. This is where I am trying to get the string variable and then printing it out.
I am trying to make a program that calculates the change due in dollars and cents. The user inputs both the amount due and the amount tendered. My program only works with whole numbers?
I trying to get this code to get user input instead of reading from a hardcoded array. I'm getting compile errors while trying to get user input. Here's some of the code:
I have to take a users input. The general gist of the problem is I want to convert a decimal number entered by the user inputs into it's binary equivalent....the conversion part I know how to do.
I'm stuck at the user input phase. If the user inputs a decimal number within the correct range (lets say between 0-5000 for this example) the conversion goes ahead as planned and the program outputs on the screen the binary equivalent.
If on the other hand the user inputs a number outside of this range ... OR a String OR and empty space, an error message is given and the user is asked to try again. I don't know how to handle it if the user enters the different types...int or String.
I'm having an issue with my program that needs 2 lines of input when I only want one. First I call Scan.nextLine(); to fetch a word. Then I want Scan.findInLine(word).charAt(number); to scan the string word for a letter instead of having to put another line in the console. How do I make Scan.findInLine(word).charAt(number); scan a single String instead of scanning input typed by the user?
I have the code below that just keeps getting the user's name and displaying it until the user enter's an empty string. Well, to simulate that, I just hit the keyboard instead of entering any name but for some reasons I am not seeing in my code, the programme just keeps looping.
System.out.println("Enter your name : "); Scanner st = new Scanner(System.in); while(st.hasNext()){ System.out.println("Enter your name : "); String name = st.nextLine(); System.out.println(name); if(name==" ") break; } System.out.println("you are out of the while loop now!!");
So this application gets input from the user and converts it into a string. It then uses various methods to set instance variables of this class and ends up printing those classes to display information to the user about that products.
package javaapplication5; import java.text.NumberFormat; import java.util.Scanner; public class Product { private String product; private String description; private double price;
[Code] ....
I am getting a logical error. My output is this:
Enter a product for information. Choose either Java or C++ java Prduct: null Description: null Price 0.0
I made a guess a number program but I am having issue figuring out a way that when a user enter's in nothing for the program to spit out a message saying "hey entering nothing doesn't work try again" then ask for input. I have done some research and from what I have found is to read the input in as a String rather than int, and use something like Integer.valueOf() to get the integer value but I am completely lost on how to apply that to my program here is my code
//import statements import java.util.*; //for scanner class // class beginning public class Guess { public static void main(String[] args ) { //Declare variables area int guess, secretNumber = (int) (Math.random() * 10 + 1), lowGuess,highGuess;
My assignment is to create a hangman game. One of my first difficulties with it is how to scan the string for an input supplied by the user.
Here is my method:
//Guesses that character c is in the secret word. //Updates all instance variables accordingly, //and returns true if c is present in the secret word. public boolean guessCharacter(char c){ }
i am trying to do a program captures keystroke and mouseclick from user in a textarea and insert the details intoa text file using java. Mainly such as delay between keys, no. of times backspace being pressed, alt tab press and copy paste mouse click.
The project is a program that allows the user to enter students and enter grades for each student. One of the requirements is that if there is already a grade stored for the student that it will display the previous grade. IF the user then enters a new grade the new grade will be stored. IF the user simply presses enter (enters an empty string) nothing is done. I have everything working except for the requirement of doing nothing if the user enters an empty string. If I just press enter at this point I get a NumberFormatException.
The below code is a method "setTestGrades" from the student class. This method iterates through each student object stored in an array list and then checks if there is a previous grade (Requirement# unset grades have to default to -1) before allowing the user to set a new grade.
public void setTestGrades(int testNumber) { //Sets the grade for the specified test number for each student in the arraylist. testNumber -= 1; Scanner input = new Scanner(System.in); for (int i = 0; i < studentList.size(); i++) { System.out.println("Please enter the grade for Test #" + (testNumber + 1) + " For Student " + studentList.get(i).getStudentName());
I am creating a simple Symptom Checker application. The problem I have is that I'm trying to retrieve user input (JTextField) by comma's using StringTokenizer which contacts the database for a result which matches the user's input (SELECT * FROM DIAGNOSIS WHERE ?, ?, ?) . It successfully finds the correct result however only in a particular format. Not different combinations....
for example, if I enter say within the JTextField: "tearful, nausea, lack of motivation" it will find the result successfully (as that is how it is formatted within the particular column (in the database table) i wish to display a result from) however, if i enter a different combination of these symptoms: "nausea, lack of motivation, tearful" - it will not find any result. I'm very unsure how to make it work regardless of what is inputted first, second or last.
Here is the code:
public void actionPerformed(ActionEvent e) { try { String abc = fieldsymp1.getText(); StringTokenizer str = new StringTokenizer(abc); while (str.hasMoreTokens()) { str.nextToken((", ")).trim();
I need to design, implement, and test a program to input and analyze a name. The program begins by retrieving a user input string from the keyboard. This string is intended to be the user's name. These are the errors we have to search analyze the user input for: No blanks between names firstName and lastName, Non-alphabetic characters in names, Less than two characters in first name, and Less than two characters in last name. Each of these errors must be thrown. All exceptions must be derived from a programmer-defined class called NameException. Each exception should use a detailed message to differentiate among the file types of errors.
This is the format of my NameException class, is the format itself correct? I will fill in the details of each exception I am just wondering if that is how I should set it up.
public class NameException extends Exception { private String firstName, lastName; public NoBlanksException(String firstName,String lastName) { } public NonAlphabeticalCharactersException(String firstName, String lastName) {
[Code] .....
I was told not to try and catch thrown errors in the main method, would I just create another method in the Driver class to take care of that then?
I am writing a code in which a user inputs data as a string and that data must be verified as a valid number. A valid number is anything from 0-100. Then all valid numbers are converted into double numbers.
I am having trouble in how to write the validation part of the code.
Is it suppose to be an if, else statement? And if so how is it suppose to be validated?
I'm trying to get data from a GUI input window into an ArrayList and back out via a JTable. I can get the array lists to print to the console within the input class, but I need to wire it to a data container and out through a different class. Here is code from one input class, and its corresponding output class:
Input: public class AddClassroom extends JFrame implements java.awt.event.ActionListener { // UI components // are declared here...
I need to generate a league table in Java based on results provided in the shape of user input. I have the 6 teams in an array. I need to ask the user how many wins, draws, losses each team has had.
for (String element : teams) { System.out.println( "Please enter the number of wins, draws and losses for " + element); int[] wins = new int [6]; int[] draws = new int [6]; int[] losses = new int [6]; }
How do I pull 3 separate values from the user and then store each value in a separate element of each array? so if one team wins 3, draws 2 and loses 1 - I need to put 3 into the wins array, 2 into the draws array and 1 into the losses array? I then need to total all this in a table.
I need to receive input from the user, as many times as he wants. tha is done with the while loop. I also need to output the min and the max numbers the user enters, therefore i have the if statememnts. also if the user enters only one value i need to output that one value as the min and the max.
int min =0; int max = 0; int option = JOptionPane.YES_OPTION; while ( option == JOptionPane.YES_OPTION){ String dataString = JOptionPane.showInputDialog("Enter an integer"); int data = Integer.parseInt(dataString);
I have to use the company's login resource, which returns a login page for authentication after a browser/user page request; after successfully authenticated, the session attributes are set in a (remote) valued object (VO) invoked via servlet; then, such values are set in my (local) POJO.
I want to display the current user session attribute (see xChave below) and save it in database. How can I persist http User session attributes through the structure below?
Abstract Controller (just the main code):
public abstract class AbstractController<T> { @Inject private AbstractFacade<T> ejbFacade; private Class<T> itemClass; private T selected; private Collection<T> items; //GETTERS AND SETTERS OMMITED public AbstractController(Class<T> itemClass) { this.itemClass = itemClass; }
My problem is that in my program, I have the user input data for one of three product objects, however when I read the data for all three objects, the same data is stored in all of them.
Anyway this is the method from the Interface class:
private void readInput() // the only method in the program that accepts product data from the user { Store matesStore = new Store(); String name; int demandRate, productChoice; double setupCost, unitCost, inventoryCost, sellingPrice; Scanner console = new Scanner(System.in);
[Code] ....
And here is the method from the Store class:
public static void addData(int option, String newName, int newDemand, double newSetup, double newUnit, double newInventory, double newPrice) //sets the product data for a particular product { if (option==1) setData(product1, newName, newDemand, newSetup, newUnit, newInventory, newPrice); else if (option==2) setData(product2, newName, newDemand, newSetup, newUnit, newInventory, newPrice); else /*(option==3)*/ setData(product3, newName, newDemand, newSetup, newUnit, newInventory, newPrice);
[Code] ....
The problem I had was with static variables and methods.
One of the requirements of my programming assignment is that a user enters a command along with two numbers. For example, if I entered the following command:
I 5 6
The program create an image like this (it wouldn't be outputted though):
00000 00000 00000 00000 00000 00000
It creates a 5 x 6 "image". This is where my troubles begin. The program should also accepts other commands, such as:
L 3 2 F
which would produce (also not outputted):
00000 00F00 00000 00000 00000 00000
Here is my method for creating an "image" with an M * N array
for (int i = 0; i < column; i++) { for (int j = 0; j < row; j++) { System.out.print("0"); } System.out.println(); }
The code works, but I need to store the image in an array so it can be changed by other methods (I can't create the image manually every time). I tried doing something like this but it doesn't work:
public static String[][] createImage(int row, int column) { String[][] image = new String[row][column]; for (int i = 0; i < column; i++) { for (int j = 0; j < row; j++) { image[j][i] = "0"; } System.out.println(); } return image; }
This method outputs as many blank lines as the columns I entered and the memory location of image.
So my question is: how would I store "0" in a 2D array so that it can be accessed and changed by other methods?Or, am I using a 2D array incorrectly and will the image have to be created manually every time? If so, how would I output image if it is created in a separate method?
I have the following method that I need to implement:
{ // YOUR CODE HERE File file = new File(filename); int counter = 0; String tempArtist, tempName; Album tempAlbum; Track tempTrack;
[code]....
Ok so I updated my code from the initial post since I made some progress on my own. I guess now I'm just stuck on how to scan in the file of strings and stock it into the type Track. (I've tried using both the initial linked list for this and a temporary variable with no luck).
I am building an app, where I have to store the data eg: "hello ! how are you" in java as a string and then use scanner to get input and check if the entered word is present in the line stored. If it is stored then the entire sentence must be displayed. eg : if the stored string is "hello how are you"
if the entered string is "how", then the entire sentence "hello how are you" should be displayed.
When learning HashMaps in C++ I had to create the whole algorithm. In the code I created I could simply place a string into the method and it would store the names for me by turning the string into a integer and storing is accordingly. If there was a collision it would grow linearly at that location.
//play with Hash Tables void getNames(String names) { HashMap<String, Integer> map = new HashMap<String, Integer>(); map.put(names,22); }
How can I do this in Java. I read about them and look at examples and they all for the most part look like this.
public class MonthsName { static String monthsName[]; public static void main(String[] args) { String[] months = new String[13]; months[0] = null ;
[Code] .....
I keep getting 1 error that tells me this. Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 0 at MonthsName.main(MonthsName.java:22) Java Result: 1
Just before that netbeans couldn't find the main class. I was wondering if it netbeans or my code that's wrong.
