This has three different classes in a package and the program itself is supposed to read and perform operations obtained from a txt file. However, I'm not even sure how to get it to perform the operations from the text file. I know that it can read the file as I was able to get the program to print the text found in the file when I ran the program with a test print to make sure that all content was being read. However, I am clueless when it comes to how to get the program to look at the text as commands.
Here is the piece of code that I am not sure where to go from as far as telling the program to read the text and perform the tasks listed.
public static void doTVoperations(){
File operations = new File("operations.txt");
if(operations.exists())
try{
Scanner n = new Scanner(operations);
This has three different classes in a package and the program itself is supposed to read and perform operations obtained from a txt file. However, I'm not even sure how to get it to perform the operations from the text file. I know that it can read the file as I was able to get the program to print the text found in the file when I ran the program with a test print to make sure that all content was being read. However, I am clueless when it comes to how to get the program to look at the text as commands.
Here is the piece of code that I am not sure where to go from as far as telling the program to read the text and perform the tasks listed.
public static void doTVoperations(){ File operations = new File("operations.txt"); if(operations.exists()) try{ Scanner n = new Scanner(operations); while(n.hasNext()){ String readOperations = n.nextLine(); String [] command = readOperations.split("[ ]"); } n.close(); } catch (FileNotFoundException e){ System.out.print("Error...TV in need of repair!"); }
I need to know how to automate a web browser (either Chrome, Firefox or Safari) to perform the following task.
Take a word from a .txt file housed on my hard drive,
1) put it into a search engine, 2) load the results, 3) click on/ open the first result, 4) open up an new tab and perform steps 1-3 again but with the next word from the .txt file. 4-5 second pauses are needed in between each step.
Additionally, I would like to automate the browser to close all the open tabs when a full stop is pulled from the .txt file.
I am somewhat of a java newbie (learned it awhile back and just getting back to programming some again.) I have a text file of data much larger than this, but here are the first ten rows and first 10 columns.
I can read and write all the data back out to files. But I am not sure about a few things.
First would it be best to use BufferedReader and OutputStream such as:
public static void main(String[] args) throws IOException { BufferedReader bReader = new BufferedReader(new FileReader ("testdata.txt")); BufferedOutputStream bytesOut = new BufferedOutputStream(new FileOutputStream ("outfile.txt"));
Second, I was then going to initialize an array but I might have 30 or more columns of data, of which I might perform and output only 10 columns to my output.txt file so is this a good way?
Third, I only want to perform operations (such as average the data, convert units or multiply two columns together) on 10 of the 30 plus columns and print out results to output.txt file. For example, In testdata.txt file above, I want to skip first seven columns. I then want to take column 8 and multiply by 100 then divide by 3 and output result to output file. I want to do same for column 9. Column 10 I want to multiply by different number (by 3.5).
I am trying to create a file browse option in my jsp and later after browsing, all i want to do is to read that file in my jsp without saving it into that database so that i can perform encryption for it and save that encrypted file later into my database. please provide reference link so that i can refer to some applications and and move ahead with my work.
I have a program that reads lines of text, but some of the lines of text aren't applicable and break the program. I'd like to put a letter in front of the lines in the .txt file I want to use, such as a #.
I need to make an if loop that'll check for the first letter on the line being #, and use the line in the program if true and skip if false. I'm guessing a boolean variable would be useful here to be true or false depending on the presence of #, but I don't know how to only read the first letter of each line, how can I do this?
01. pickup the selected text file and read the line by line and output the text in to visual text pane.
what i did:.
01. I wrote code that read the text file and output in to jave console/ also some of the interface.
the code read txt file:
Java Code:
String fileName = "C:/Users/lakshan/Desktop/lawyer.txt"; File textFile = new File(fileName); Scanner in = new Scanner (textFile); while(in.hasNextLine()){
[code]....
so it will read any text file dynamically and output to the text pane in interface. I think scanner code must be execute after the select the file from the browser and set the scanned result in to variable. then later out put the var as string in some jswing component?
I'm supposed to write a GUI application letting the user enter a file on the text field and display its hex representation in a text area and vice versa.
Here's my code:
/* * To change this license header, choose License Headers in Project Properties. * To change this template file, choose Tools | Templates * and open the template in the editor. */ package hexconvertor; import java.util.*; import java.io.*; public class HexConvertor extends javax.swing.JFrame {
I have a jButton that when the action perform runs it only does part of the tasks some of the code doe not appear to run and i just can not figure out why i have tried wrapping parts of it in an if statement and it still do not run so here is the code behind the button:
in the code the parts that do not run are jTextField10.setText("Working Please Wait"); and jButton15.setVisible(false);
what i am expecting to happen is the text field has the words Working Please Wait placed in it , this does not happen and the button should be hidden to prevent it being clicked a second time again this does not happen
the rest of the code works as expected
InputStream inStream; OutputStream outStream; try { File afile = new File("C://templates//amendments.xls"); File bfile = new File("C://amendments.xls"); inStream = new FileInputStream(afile); outStream = new FileOutputStream(bfile);
I am trying to read a text file into Java and split the text into tokens. Eventually I want to be able to count the number of instances of a specific word. However, at this point, when I run the file, all I get is the location of the file rather than the text in the file.
import java.util.*; import java.io.*; public class textTest3 { /** * Prints the number of words in a given file * * @param args * @throws IOException */
I have a library that uses a ThreadPoolExecutor, backed by a bounded queue.
We submit a large number of tasks to this executor, constantly polling an external dependency for new work. However, this executor has a fixed size. When a ThreadPoolExecutor is busy, it queues up to the blocking queue's capacity tasks in its blocking queue, at which point it starts rejecting tasks.
What I'd rather do, instead of requesting more work, and then throwing it out, is to detect that we're totally busy and stop requesting work until a thread frees up.
Now, I know that one approach is to rewrite the workers such that they are infinite loops, who poll for work when they're finished. Due to the large number of consumers of this library, this is not an option.
I have come up with two other solutions.
1) This is one that I know will work, which is to use a semaphore or other concurrent counter to track how many tasks I have submitted, and stop requesting more work when that semaphore is out of permits. The processors release a permit when they complete (whether due to exception or success).
2) The other option, since I know this is a ThreadPoolExecutor, is way simpler, but also is something I'm not sure is reliable.
I can compare executor.getActiveThreads() + executor.getQueue.size() to the maximum number we can handle before rejecting (maxThreads + queueSize). This change is far simpler, but I'm not sure if those calls are a reliable way of counting the current work.
I am on developing a web application (using struts). So most of my web application use cases are reading and presenting data to the users.
But i need to write the another set of programs to keep on reading the data from another data bases and update my database. I have list of timings at which i should read the data from each of other sites (i.e. i know when the other databases gets updated information). Its almost every 20 mins..
Now i want to design the app.
1. Should i include the data read programs as part of my Web application ( means runs in same server JVM) and make the threads as daemon threads..? 2. Should i write another application (offline application) runs out of server in another JVM ?
My full instructions are to Design a Java interface called Priority that includes two methods and two constants. The methods are setPriority and getPriority. The constants are MIN_PRIORITY with value 1 and MAX_PRIORITY with value 6. The interface should define a way to establish numeric priority among a set of objects. Design and implement a class called Task that represents a task (such as on a to-do list) that implements the Priority interface. Assume that Task has two attributes (instance data): name and priority. Define the Task constructor to accept and initialize the name of the task. Each newly created Task should have priority equal to MIN_PRIORITY (the constructor should initialize priority to MIN_PRIORITY). Priorities can be changed using setPriority method. Create a driver class TaskDriver that should do the following: prompt the user to enter three tasks and their priorities, and then print the tasks in the order of decreasing priorities. If the user enters an invalid priority that is less than MIN_PRIORITY or greater than MAX_PRIORITY, then the user should be asked to enter priority again until a valid priority value is entered.
So far I have:
public interface Priority { public void setPriority(int level); public int getPriority();
I am working on a project that requires me to build a database with random access file, representing products, the base product contains a name (about 30 characters), a price (double), and a quantity (integer). I have worked on this project for probably 15+ hours and have tried so many things and feel like I've barley made any progress...
The part i am really struggling with is taking the data from the text file and creating an object array with it using the product class. Once ive accomplished that, i have to use that data to create a random access file with the data.
Here is the base Product class that must be used to create the objects for the array.
public class Product { public String pName; public String stringName; public double price; public int quanity;
[Code] .....
And then here is the data from the text file that i must extract to use to create product objects.
These continue for about 40-50 entries, they are not separated by a blank line though i had to add those so it would display correctly, each entry is on its own line with name separated with spaces, then price after a comma, then quantity after the second comma.....
I am working on a project that requires me to build a database with random access file, representing products, the base product contains a name (about 30 characters), a price (double), and a quantity (integer). I have worked on this project for probably 15+ hours and have tried so many things and feel like I've barley made any progress...
The part i am really struggling with is taking the data from the text file and creating an object array with it using the product class. Once ive accomplished that, i have to use that data to create a random access file with the data. Here is the base Product class that must be used to create the objects for the array.
public class Product { public String pName; public String stringName; public double price; public int quanity;
[Code]...
these continue for about 40-50 entries, they are not seperated by a blank line though i had to add those so it would display correctly, each entry is on its own line with name seperated with spaces, then price after a comma, then quanity after the second comma.....
I am working on a project that requires me to build a database with random access file, representing products, the base product contains a name (about 30 characters), a price (double), and a quantity (integer). I have worked on this project for probably 15+ hours and have tried so many things and feel like I've barley made any progress...
The part i am really struggling with is taking the data from the text file and creating an object array with it using the product class. Once ive accomplished that, i have to use that data to create a random access file with the data.
Here is the base Product class that must be used to create the objects for the array.
public class Product { public String pName; public String stringName; public double price; public int quanity; //Constructor public Product( String pName, double price, int quanity )
[code]....
and then here is the data from the text file that i must extract to use to create product objects.
Dill Seed,938,34
Mustard Seed,100,64
Coriander Powder,924,18
Turmeric,836,80
Cinnamon (Ground Korintje),951,10
Cinnamon (Ground) Xtra Hi Oil (2x),614,31
Cinnamon (Ground) High Oil (1X),682,19
these continue for about 40-50 entries, they are not separated by a blank line though i had to add those so it would display correctly, each entry is on its own line with name separated with spaces, then price after a comma, then quanity after the second comma.....
New to programming. Am supposed to create a program that reads a text file (of integers) and computes a series of computations on these integers. I don't have the code for the integers in my code yet, (i know how to do those), but am struggling getting the array to simply print in the print writer. I have the user select a text file, read the file with a scanner, and then save the computations done from my code into another file. specifically, the problem is as follows: Write a program that uses a file chooser dialog to select a file containing some integers. The file contains an integer N followed by N integers. The program then uses a file chooser dialog to let the user specify the name and location of an output file to write results to.The data written to the output file will be as follows
(1) The original list of N numbers from the input file, (2) The original list of N numbers printed in reverse order of how they appear in the input file. (3) The sum and average of these numbers, (4) The minimum of all the numbers, (5) The maximum of all the numbers.
I am new to java and I am creating a system that will ask the user to create a file that will store to a text file, Once the user created the file I have a class that will let the user input the subject name that has been created, However, I keep on getting this java.util.nosuchelementexception.Here's my code:
public void display_by_name() { String id, name,total; String key[]=new String[30]; String value[]=new String[30]; int i=0;
I am facing a problem while executing a task. My task is to make such a code which will search for my source code file (abc.java) in all directories and then displays the code in textarea inside frame and along with that i also have to display the path of the file in text field. I have coded something but i am really not getting anywhere near my task.
i have made one desktop application with swing and i have uses one textfile (File) in it. i want to handover to another friend to use it . How to create jar file of that program with that text file so that my friend use it without any issue . I have made it in NetBeans
Write a program that uses a while loop to perform the following steps: Comment by labelling each part: //Part A, //Part B, etc...
A.)Prompt the user to input 2 integers: firstNum and secondNum. Use 10 and 20. B.)Output all odd numbers between firstNum and secondNum. C.)Output the sum of all even numbers between firstNum and secondNum. D.)Output the numbers and their square between 1 and 10. E.)Output the sum of the square of odd numbers between firstNum and secondNum. F.)Output all uppercase letters.
Again I am new to while loops and I am totally lost. I have just completed 8 other programs using if else statements and now trying to get the hang of loops.
import java.util.Scanner; public class whileLoop { public static void main(String[] args)
