How To Call Java Class File From Press Of Button On Apex
Dec 23, 2013
I am newbie in java and little bit known to apex. I write an java code and compile it to class file. Now i want to call that class file from an push of button on apex. When button is pushed i need some arguments to be password to java class files . For arguments i need to take the item value from the apex page.
But i stuck on how to call that java class file from apex. On command prompt when i ran java class file, its working.
I have been reading some java guides here [URL] .... and was trying to put a bit of what I have learnt into practice but am having some difficulty. Basically, using netbeans IDE I have created a new jFrameform so that I can place swing components in design mode. What I want to create isnt overly complicated but I just cant seem to get it. In design I have simply added a panel and a button. When I press the button I want to display an image I have located at:
/resources/images/numbers/1.png.
This is my code so far (most of it has been automatically generated from me adding things via design mode:
/* * To change this license header, choose License Headers in Project Properties. * To change this template file, choose Tools | Templates * and open the template in the editor. */
I assume I need something like below somewhere , do i need to create a draw method? if so how do I call it as it is expecting graphics2d as a parameter, what would I pass into it?
I am trying to do a program about a contact agenda, now, I have one JPanel that contains three sub panels (GridLayout(1,3)) where I have in the left the picture of the Contact, the middle one is not important, but the right one contains 4 JTextFields with information of the contact and one JCheckBox that indicates if the contact is a favorite or not. The thing is that I am only able to show the first contact, but I want to be able to scroll between the contacts with a Button that I have in another panel. I think I am actually scrolling among the contacts, but the panel with the information from the contact is not updating the information...
public class PanelInfoContacto extends JPanel{
// ----------------------------------------------------------------- // Constructores // ----------------------------------------------------------------- /** * Construye el panel. <br/> * @param contacto - es una referencia al contacto que muestra. contacto != null. */ public PanelInfoContacto(Contacto contacto){ setLayout(new GridLayout(1,3));
I have a EAR file which has a java class file and EAR file is deployed in weblogic.I have to call the java class of EAR file from a standalone java code which is present inside a JAR.While making the call to EAR i have to pass a parameter from JAR to one of the methods of class file which is present in EAR.
In Main.java, How can i call method in CircleCalculationMethod.java ?
Should I put everything in same folder ??Should i do something like "import CircleCalculationMethod.java"Should i do something like create a package ...
The following code is located in my main class called InjectionFix. I have another class where I need to call or initiate the string in the code below. How can I achieve this. I tried to create an Object of the class but I cant do this because my other class doesnt contain a main method.How can I get the other class to initiate the code below which is loacted in my main class.
public static String escapeDN(String name) { StringBuilder sb = new StringBuilder(); // space or # character at the beginning of a string if ((name.length() > 0) && ((name.charAt(0) == ' ') || (name.charAt(0) == '#'))) {
I am getting the problem as If call the action class through the ajax, my property values not setting to the formbean class, How can I use the formbean to set the all my property values and getting in action class.
I am trying to make a JTree. I have used this guide :[URL]
Now when I call my Class with
TreeMainMenu tree = new TreeMainMenu(); JScrollPane MainMenu = new JScrollPane(tree);
I get only the default JTree..
I need to understand how I should build my code to call the class as JTree.
This is my code:
public class TreeMainMenu extends JTree { private DefaultMutableTreeNode top = new DefaultMutableTreeNode("TOP"); JTree tree; public JTree TreeMainMenu() { APNode(); tree = new JTree(top); tree.getSelectionModel().setSelectionMode(TreeSelectionModel.SINGLE_TREE_SELECTION); return tree;
I have wrote the necessary program for the class which was : Modify the customer class to include changeStreet(), changeState(), and changeZip methods. Modify the account class to include a changeAddress() method that has street city and zip parameters. Modify the Bank application to test the changeAddress method.
The problem arose when I went to test it. For some reason when it asks "Would you like to modify your account information? (y/n)" it will not allow the user to input anything and thus test the class. Here is my code
Class Customer import java.util.*; import java.io.*; public class Customer { private String firstName, lastName, street, city,state, zip;
For reference I am programming Java in BlueJ. I am fairly new to the language and I am having trouble with sorting.
I am trying to call / test all of the 5 sorting methods (at the same time) in the main class. To be specific, the sorted list has to technically outputted 5 times.
I figured out how to call / test Quicksort:
Sorting.quickSort(friends, 0, friends.length-1);
But the others are not working correctly. Specifically these:
For reference, this is the output when it is not sorted:
Smith, John 610-555-7384 Barnes, Sarah215-555-3827 Riley, Mark 733-555-2969 Getz, Laura 663-555-3984 Smith, Larry464-555-3489 Phelps, Frank322-555-2284 Grant, Marsha243-555-2837
This is the output when it is sorted:
Barnes, Sarah215-555-3827 Getz, Laura 663-555-3984 Grant, Marsha243-555-2837 Phelps, Frank322-555-2284 Riley, Mark 733-555-2969 Smith, John 610-555-7384 Smith, Larry464-555-3489
This is the class Sorting, which I should note is all correct:
public class Sorting{ /** * Swaps to elements in an array. Used by various sorting algorithms. * * @param data the array in which the elements are swapped * @param index1 the index of the first element to be swapped * @param index2 the index of the second element to be swapped */ private static <T extends Comparable<? super T>> void swap(T[] data, int index1, int index2){ T temp = data[index1]; data[index1] = data[index2];
[Code]...
This is the Main class in which I am supposed to call the sorting methods, SortPhoneList:
public class SortPhoneList{ /** * Creates an array of Contact objects, sorts them, then prints * them. */ public static void main (String[] args){ Contact[] friends = new Contact[7]; friends[0] = new Contact ("John", "Smith", "610-555-7384"); friends[1] = new Contact ("Sarah", "Barnes", "215-555-3827");
I am trying to create a second class in a single java file (first time trying this) and want to use data from the first class in the second class but I am not able to do it. What am I missing :
package simplecommissioncalculation; import java.util.Scanner; // import java.util.Scanner public class SimpleCommissionCalculation { public static void main(String[] args) {
I am a JSP/Servlet newbie currently adding the first servlets to a web site that had been static all along. My local instance worked great but the servlets did not respond on the test instance. Apparently, my hosting service provider requires me to use an invoker servlet mapping.
Adding this to local web.xml broke the application but the servlets respond on test instance (when their calls are not preceded by another servlet call). A Servlet fails when it is called immediately after another servlet has been called.
What I saw happening on test is URL for first call is of the form:
The servlets are invoked using "href=servlet/<servlet-name>?Id="
How can I avoid the inclusion of 'servlet' in the URL and reset the URL to the JSP page it navigates to after processing of the servlet?
P.S.: I am also trying to enable the Invoker servlet on local so I can troubleshoot easier. I went through the changes to Tomcat's web.xml and context.xml. However, my local servlets did not respond even after calling them using "href=<servlet-name>?Id=". Is there a way I can check if my invoker is active?
I have four buttons with different names and depending on which button is pressed I want to change the label to be displayed. Center is the name of the label the other directions are buttons. The label should change if a different button is pressed. The error I get is that it cannot be converted to String.
public void actionPerformed(ActionEvent event){ Object source = event.getSource(); if (source == east){ center.setText(east); } if (source == west){ center.setText(west);
i have two classes, one is a GUI program and the other is an index writer program. the GUI program uses a j file chooser to select directories and display them in the text fields.the index writer is supposed to take the directories in the text fields and read from one(document location) and write into the other(index location) i want to run the index writer program by the click of a button(indexfbuton) in the gui programi have been able to get the directories to display in the text field but when i click the button to run the index writer class, nothing happens..here is the GUI class
I have this program, I am wondering if it is possible to call files from the main method and sort them into my saveOneRocord method? If so, how would that look?
i want to make a piece of software that enables me to Press a key on my keyboard and then it will play a Sound. But i Want to be able to do it when i'm playing.Can code The Sound an Keys
So I am trying to write the output of two different java class files to one txt file while the program runs. The file name is determined before the program is ran, through the command prompt as arguments. How can I get the second class file to edit the same txt file without running into compile errors.
For right now I'm just going to send everything that the second file outputs to a message String variable, so that the Main class outputs to the the text file. I still want to learn how to write to the same text file directly from the second class file.
import java.io.*; public class Test{ public static void main(String[] args) throws IOException{ int x; //create a new file internally called doc. But externally labelled the user input File doc = new File(args[0]); if (doc.exists()){
