I am trying to test my JMX bean in JConsole. How do I input BigInteger parameter values using JConsole? It appears to want a numeric value, but everything I have tried results in an IllegalArgumentException saying there is a ClassCastException.
View RepliesI have an object that has an instance of another object class as its parameter :
CombinationLock oneHundred = new CombinationLock(28,17,39);
Locker Mickey = new Locker(100, "Mickey", 3, oneHundred);
This is for a locker, which has a combination assigned to the student. Within the locker class I have the following constructor:
public Locker(int locker, String student, int numberOfBooks, CombinationLock combo) {
this.locker = locker;
this.combo = combo;
this.student = student;
this.numberOfBooks = numberOfBooks;
}
combo is the private CombinationLocker object I created within the Locker class. Do I need to pass the combo object on to the CombinationLock class? For reason, I do not comprehend, the combination password from the main class is not passing through to the CombinationLock class, and the combination values are all zero.
I think my code is correct, but I cannot input any value into the parameter without it returning an error. I have tried different forms of the time (0734, 7:34, 7,34, and others) but none of them work. I attached a screenshot of the error message. How can I input the parameter?
public class Time extends Object
{
private int itsHour; // always in the range 0 to 23
private int itsMin; // always in the range 0 to 59
/** Create an object for the given hour and minute. If min
* is negative, adjust the values to make 0 <= min < 60. */
public Time (int hour, int min) // constructor
[Code] ......
How to convert an 'int' to BigInteger.
View Replies View Relatedi want to make an while loop that uses a bigInteger. but it want do it, so what do i do?
View Replies View RelatedI have a program i m not sure how to implement :
(Square numbers) Find the first ten square numbers that are greater than Long.MAX_VALUE . A square number is a number in the form of n 2 . For example, 4, 9, and 16 are square numbers. Find an efficient approach to run your program fast.
I found two ways of solving this but i think both are way inefficient :
-A square number can be divided in lesser square numbers :
what's the square of 36 ? 36 is 2 * 3 * 2 * 3 => 4 * 9 => square is 2 * 3
-second option is to estimate a number and increase it or decrease it based on how close that number * number is to the BigInteger starting number , as as it gets closer the delta gets smaller until it gets to 1
how can i store biginteger in an array?
View Replies View Relatedi have tried permutation with big Integer in Java. it works fine upto 4 integer input say 3456 P 2345 but nothing happens in console when i type 5 digit input..here is my code
public class cvic {
public static void main(String[] args)
{
Scanner scan = new Scanner(System.in);
System.out.print("Enter n and r: ");
BigInteger n = scan.nextBigInteger();
BigInteger r = scan.nextBigInteger();
System.out.println("nPr = "+fact(n).divide(fact(n.subtract(r))));
[code]....
I am calculating an exponent without using BigInteger. However, I find that using long is not enough to handle my code. Is there a way to handle large numbers without using BigInteger?
public static void main (String[] args){
int base = 3;
int exponent;
long total = 1L;
boolean n;
Scanner input = new Scanner(System.in);
[code].....
I am currently working on Project which involves me needing a BigInteger array and sorting it somehow. I have been able to do
* Array.sort(arrayname); *
In past codes, but Eclipse is telling me that I can't do this with my BigInteger array. I have already imported java.util.Arrays
I've been trying to learn how to read in file input and have a question about this piece of code:
Java Code:
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.util.Scanner;
public class readFile {
public static void main(String args[]) throws FileNotFoundException{
File file = new File("file.txt");
int sum[]=new int[5];
int i=0;
[Code] .....
"file.txt" holds the following information:
1
2
88
42
56
89
But my output looks like:
2
42
89
if I take out sum[i]=input.nextInt(); it will display all values in the file.
Many times I have read that JSF stores de view state in session and one of the things that are stored are the values of the form fields, right? But these input field values are not stored in session, I mean, they depend of the scope of the managed bean attached to the view. If I have a view and its attached to a view scoped bean with properties for the form fields, the values will dissapear if I go to other view because the bean is view scoped so I cant say the values of the form are stored in session, right?
View Replies View RelatedSo I'm learning java from a website and I was tasked with creating a simple program which allows the user to enter a series of integers, then finally when they decide to input a non-integer the program will print the maximum and minimum values of the integers they entered. So for example if they entered 5, 4, 3 and 2 then enter a non-integer the program would output 5 (maximum value), then 2 on a new line (minimum value).
Here is my code:
import java.util.Scanner;
public class MaxMinPrinter {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
int max = Integer.MIN_VALUE;
int min = Integer.MAX_VALUE;
[Code] ....
And this is what the output looks like:
Actual output
-------------------------------------------
Enter an integer: 5
- 10
-
- Enter an integer: -4
- 8
- -6
-
- Enter an integer: 11
- -1
-
- Enter an integer: q
- -1
- -6
When it's supposed to look like this:
Expected output
-------------------------------------------
Enter an integer: 5
Enter an integer: 10
Enter an integer: -4
Enter an integer: 8
Enter an integer: -6
Enter an integer: 11
Enter an integer: -1
Enter an integer: q
11
-6
I am trying to match the input string with range of values and getting PatternSyntaxException. below is my code
public static void main(String[] args) {
String regex="01[4-6]";
String code="015";
boolean bool=code.matches(regex);
System.out.println(bool);
}
output: true
But when i try to give range in double digits, it throws exception. What if i have to match a number(as string) between 10 to 25 or like that.
public static void main(String[] args) {
String regex="0[14-16]";
String code="015";
boolean bool=code.matches(regex);
System.out.println(bool);
}
Output:
Exception in thread "main" java.util.regex.PatternSyntaxException: Illegal character range near index 5
0[14-16]
^
Write a program that reads a sequence of input values and displays a bar chart of the values, using asterisks, like this:
********************** **************************************** **************************** ************************** **************
You may assume that all values are positive. First figure out the maximum value. That value's bar should be drawn with 40 asterisks. Shorter bars should use proportionally fewer asterisks.
import java.util.Scanner;
import java.util.ArrayList;
import java.util.Arrays;
public class Array717
{
public static void main( String[] args )
[Code] ....
The problem is that all this code does is print 1 line of *'s and what seems to be thousands of them
I know I can calculate the sum of squares as such:
// SumSquares.java: calculate the sum of two squares
class SumSquares {
static int sumSquares(int a, int B)/>/> {
int asquare;
int bsquare;
[Code] .....
But how can I modify the code so that it inputs a list of integer values in the range of -100 to 100 from the keyboard and computes the sum of the squares input values. And how would I go about using exception handling to ensure that the input values are in range and are legal integers.
I have a assignment to do some Lexigraphic ordering. I have figured how to get the majority of this done, however, when I input my string values. No output takes place? :s
import java.util.Scanner;
public class Lab03c {
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner lexi = new Scanner (System.in);
String s1,s2;
[Code] ....
I am designing a program in-order convert Binary to Decimal values with added features:
Rejecting binary values longer than 32 bits
Prompting the user to make multiple entries after completing the binary to decimal conversion of their first entry. I was trying to code this in Nested For Loops, but I don't know if I've really done that.
Here is what i have so far.
public class BinaryToDecimal {
public static void main(String[] args){
Scanner scan = new Scanner(System.in);
String binary;
int decimal=0b10, i, rem;
boolean isBinary = true;
[Code] ....
I was practicing my java skills and came across an exercise in which a non parameter constructor calls a two parameter constructor. I tried a few searches online but they all came back unsuccessful. This is the part I am working on:
public PairOfDice(int val1, int val2) {
// Constructor. Creates a pair of dice that
// are initially showing the values val1 and val2.
die1 = val1; // Assign specified values
die2 = val2; // to the instance variables.
}
public PairOfDice() {
// Constructor that calls two parameter constructor
}
I tried calling the two constructor using the line "this(val1, val2)" but I get an error because val1 and val2 are local variables.
Then I tried to use the same signature: "this(int val1, int val2)" but that didn't work either.
I need a way to store the pixels values currently on the screen and compare them to the values on the first frame. Right now I'm using glreadpixels as follows:
currentBuffer= BufferTools.reserveByteData(mapSize);
glReadPixels(mapStartX, mapStartY, mapWidth, mapHeight, GL_BLUE, GL_UNSIGNED_BYTE, currentBuffer);
for (int i = 0; i < mapSize; i++) {
if (currentBuffer.get(i) != baseBuffer.get(i)) {
//Do nothing
continue;
}
//Do something
}
This works perfectly fine but turns out to be a real bottleneck, dropping the fps to a third of what it was. Is there any quicker way? All I'm after is speed, I don't even need to show it on the screen if the comparison is made "behind the scene".
I have a question in mind that this is my registration form. I am sending these values from HTML form to server and database. I have question that in my case if I click next to Add Another Mobile no in HTML.then a block is genereated and each time a new name is generated.
My Question is if I click 6 times then 6 name attribute are generated. How can I send and differentiate them on my server side.
Because at their I will use something request.getAttribute("Attr_Name");
But they are same. How to do this?.
I'm displaying a 3-column table with the column names ID, name, and salary. I made the ID into a link to go to the EditServlet class. What I'm trying to do is figure out which ID# was clicked to get onto the servlet page, how to implement that dynamically?
I know that if you put something like ?x=1 and then getParameter("x") on the servlet page would work, but then all the IDs would have the same parameters since I'm using a for loop to print out my ArrayList of objects.
My code for the jsp part is below.
for (int count=0; count<list.size(); count++) {
%>
<tr>
<td> <a href="EditServlet"><%= list.get(count).id %></a>
<td> <%= list.get(count).name %>
[Code] ....
I'm using Java in BlueJ where I'm trying to write a class to store cycling club membership details in a map. I'm trying to pass a map as a parameter to a function that will iterate over the map and print out the member details. My code is:
public class CtcMembers
{
//instance variables
private Map<String, Set<String>> memberMap;
/**
* Constructor for objects of class CtcMembers
[Code] ....
When I execute the following in the OU workspace:
CtcMembers c = new CtcMembers();
c.addCyclists();
I can see a map populated with the expected details.
When I execute the following in the OU workspace:
c.printMap(c.getMap());
I get the following error:
java.lang.ClassCastException: java.util.HashSet cannot be cast to java.lang.String
in CtcMembers.printMap(CtcMembers.java:81)
in (OUWorkspace:1)
I wasn't aware I was trying to cast anything so this has got me baffled.
I am trying to create a method called getVariable will has a parameter of a variable that has a type of Test, an enumeration. An int variable called x is assigned a value of 5, and through control statements, I want its value to change depending on what the argument is. I was able to correctly create this method, but when I use it I get an error saying, "non static method getVariable(Test) cannot be referenced from a static context" on line 28.
Here is the code:
package javaapplication5;
public class Product implements Cloneable
{
[Code].....
I have a JScrollPane with two coulmns. In the first column I have an image pane JTable, and in the second a list with names of sections. This second column I try to divide in two columns, one (the second column) to display the names of the sections (each row contains one name), and in the other column (the third) I want to show some values for every section in the row respectively. But, instead of displaying the desired values in the third column, I get the same names of the sections as in the second column.
View Replies View RelatedI have a entry in application.properties file
caption_bubble_value.title={0} is a caption for the element box
JSP File
<fmt:message key="caption_bubble_value.title" />
in the java file I am setting a parameter to session
request.getSession().setAttribute("replaceVal", "Value headline");
How can I get the text "Value headline is a caption for the element box" on the page?
The replacement should happen on an event.