How To Manipulate Typed Text
Jul 15, 2014
I was recently looking at the Tesseract module to convert handwritten text into typed text, however I was wondering is there anything out there, or any code which would allow me to do it the other way? I would like to load up a piece of typed up text (pdf, word, even notepad), and be able to turn it into an object for manipulation.
In the long run, I'd like to be able to open up a pdf document, click on some text, edit it, then use tesseract to turn it back into typed text.
View Replies
ADVERTISEMENT
Jan 13, 2015
ToString()-Representation of KeyEvents. I was expecting '$' as text value, because Shift was pressed.
Unfortunately, KeyTyped is not fired in this case, so I am not able to get the information from this event.
How can I get the actually typed '$' from KeyPressed?
KeyEvent [source = BorderPane[id=cnt_borderPane], target = Button@1a3fc21a[styleClass=button]'', eventType = KEY_PRESSED, consumed = false, character = , text = , code = SHIFT, shiftDown]
KeyEvent [source = BorderPane[id=cnt_borderPane], target = Button@1a3fc21a[styleClass=button]'', eventType = KEY_PRESSED, consumed = false, character = , text = 4, code = DIGIT4, shiftDown]
KeyEvent [source = BorderPane[id=cnt_borderPane], target = Button@1a3fc21a[styleClass=button]'', eventType = KEY_RELEASED, consumed = false, character = , text = , code = SHIFT]
KeyEvent [source = BorderPane[id=cnt_borderPane], target = Button@1a3fc21a[styleClass=button]'', eventType = KEY_RELEASED, consumed = false, character = , text = 4, code = DIGIT4]
View Replies
View Related
Jul 29, 2014
I'm having an issue with my program that needs 2 lines of input when I only want one. First I call Scan.nextLine(); to fetch a word. Then I want Scan.findInLine(word).charAt(number); to scan the string word for a letter instead of having to put another line in the console. How do I make Scan.findInLine(word).charAt(number); scan a single String instead of scanning input typed by the user?
View Replies
View Related
May 3, 2015
I have a JTable with 5 columns, named: "ID", "Name", "UnitPrice", "Qty", and "Total". Only the columns UnitPrice and Qty are editable by the user. When, for example, for a row in the JTable, the user types 5000 in the UnitPrice column, and types 15 in the Qty column, I would want that when he types the first character in the Qty column (i.e. the character 1) in the Qty column, the Total column displays 5000*1, in other terms 5000.
And when the user types the second character in the Qty column, i.e the character 5, after having typed 1, the Total column should display 5000*15, in other terms 75000. So, to say it concisely, I would want that the Total column refreshes accordingly each time the user types a character in the Qty column. I have tried to use the MouseClicked event of the JTable, but noticed that that does not solve my problem. is there an event I should use to refresh my Total column? Or should I proceed in another fashion?
View Replies
View Related
Sep 24, 2014
I build a select tag string and use JSTL to display this string on the JSP page.
Is there an easy way to manipulate this string to remove one of the option pairs?
View Replies
View Related
Dec 4, 2014
I have some data files that take this form:
D14
J3
N1
a26
[code]...
I also have this code that takes the file, goes through each line using a loop and counts the total of all the integers on each line, it also then loops and takes each integer on each line and divides it by the total calculated in the previous loop but I don't know what code to manipulate the strings to do these calculations. After these calculations I want to write the updated values to the text file I originally took the data in from. So as an example the total I already for this file to be '232' so the first line would be D 0.06 because 14/232 = 0.06034482758 and rounded to 2 decimal points is 0.06.
import java.io.File;
import java.io.FileReader;
import java.io.LineNumberReader;
import java.io.PrintWriter;
import java.util.Scanner;
public class Normalise {
private static Scanner scanner;
//private static PrintWriter out;
[code]....
View Replies
View Related
Nov 17, 2014
So In my program I have a String called original and I am supposed to prompt the user for a sentence and then Make a StringBuilder instance called “originalReversed” based off of original. Then I have to do is to "Manipulate originalReversed so that it contains the value of original in reverse. This is done with a single statement."
import java.util.Scanner;
public class StringBuilderPractice {
public static void main(String [] args)
{
Scanner input = new Scanner(System.in);
String original;
System.out.println("Please enter a sentence: ");
original = input.nextLine();
}
how to create the instance but not the second part where it says manipulate the value for the first part I think it might be
StringBuilder originalReversed = new StringBuilder(original);
View Replies
View Related
Jun 1, 2014
I am trying to understand what ivor is saying about the and, and or operators and the mask. If I understand it correctly the & operator prevents you from changing a bit that is one when a mask is involved and changes all others to 0 and the | operator forces a bit to 1 when the mask is 1.
My question is when would i need to actually use the & ,| operators ?when will i need to manipulate the bits in a variable?
View Replies
View Related
Oct 30, 2014
I have a little problem in my Java FX application. in a tableview, I add records whatever... And i have a button that delete the selected record in the tableview, This button delete too the related record in a database.
When I select a row in this table , I store the ID of that record in a global variable to have it available . Thus, when I click on the delete button, delete the record from the database based on the ID that I stored in the global variable.
The problem is that tableview has a curious property. If I select the last row and I click on the delete button ( removing the last record of the tableview ) , the next higher row is automatically selected ; and causes the ID value stored change .
The row is deleted in the tableview is correct but apparently , when it comes to the method deletes the record from the database, the global variable ID is already updated and delete another record.
I would like to disable that property of the table so that the row can be selected only by the mouse ... or some other solution .
...
@Override
public void initialize(URL url, ResourceBundle rb){
table.getSelectionModel().setSelectionMode(SelectionMode.SINGLE);
table.getSelectionModel().selectedItemProperty().addListener(new ChangeListener<Object>(){
[Code] .....
View Replies
View Related
Jul 1, 2014
Here's My Code.
package bin;
import java.util.Scanner;
public class AppletMain{
public static void main(String[] args){
Scanner oneinput = new Scanner(System.in);
String one;
[Code] ....
I am trying to get it to compare the word I type in to the set word in the object 'secretword'. I have tried everything from equal to == to compareTo, I even created a two hundred line program to do this SIMPLE problem.
View Replies
View Related
Nov 17, 2014
I need to read a csv file from the disk and manipulate the data inside. My problem is that if the csv (excel format) contains "" in any of it's values the whole string line gets saved/displayed incorrectly . For example for the line in the csv file :
1,393275,57319 57321 57323 57325 57327,5_5,200000,393277,57329 57331 57333 57335 57337,3_3,200000,400000,"gi,gi",,,,,,BASS/2.4,,1
it gets read in java as :
"1,393275,57319 57321 57323 57325 57327,5_5,200000,393277,57329 57331 57333 57335 57337,3_3,200000,400000,""gi,gi"",,,,,,BASS/2.4,,1";;;;
instead as :
1,393275,57319 57321 57323 57325 57327,5_5,200000,393277,57329 57331 57333 57335 57337,3_3,200000,400000,"gi,gi",,,,,,BASS/2.4,,1
My code is :
String csvFile = "resources/testcsxs.csv" ;
String l = "";
try {
BufferedReader cz = new BufferedReader(new FileReader(csvFile));
while ((l = cz.readLine()) != null ){
System.out.println(l);
}
What am i doing wrong , how can i read a csv file (excel saved) without getting "" added incorrectly ?
View Replies
View Related
Aug 18, 2014
At first I wanted to just use an array and set each day a value, however I was told that it has to be stored as a string.
Design and implement the class Day that implements the day of the week in a program. The class Day should store the day, such as Sun for Sunday. The program should be able to perform the following operations on an object of type Day:
A. Set the day.
B. Print the day.
C. Return the day.
D. Return the next day.
E. Return the previous day.
F. Calculate and return the day by adding certain days to the current day. For example, if the current day is Monday and we add four days, the day to be returned is Friday. Similarly, if today is Tuesday and we add 13 days, the day to be returned is Monday.
G. Add the appropriate constructors.
H. Write the definitions of the methods to implement the operations for the class Day, as defined in A through G.
I. Write a program to test various operations on the class Day.
import java.util.*;
public class Day {
static Scanner readinput = new Scanner(System.in);
String day;
public Day(String day) {
[Code] ....
So right now if I run my code it allows me to type in a day, then it gives me the next and previous day, the last part is to add X days to it. Ideally I would like to be able to take the day entered, depending on the day set a numeric value, then add prompt for number of days you want to add. The program should then use modal (%7 ) to add value to the value that was given based on the day, and then translate it back into a String value (the day).
View Replies
View Related
Feb 19, 2014
Write an interface Directory to manipulate entries in a telephone directory for the University. The interface must support the following operations:
1) The ability to insert new entries into the directory. Entries should be stored in alphabetical order of surname.
2) Delete entries from the directory either by name or number
3) Provide a lookup method that will find the extension no of a member of staff given his/her name. You should try to make this method run as efficiently as possible.
4) Change a person's telephone number
5) Print the telephone directory in a neatly tabulated fashion.
Write a class ArrayDirectory that implements this interface using an array to store the telephone directory information. The class must store the surname and initial for each member of staff and their telephone extension (a four digit number which may start with a zero). You may find it useful to define a class Entry to store information about individual entries. The entries should be read into the array from a text file consisting of multiple lines in the following format:
Surname<tab>Initials<tab>Telephone extension
Write a main program that reads in data from a file and then tests all the methods of your class interface. Note it is not necessary to write data back to disk (even if it has changed) in this project.
For data insertion and lookup, you should measure the performance for the average case (e.g. looking up a record in the middle of the data). To do this you can use the static method System.currentTimeMillis() which returns the time in milliseconds. To get an accurate measure of the time to perform an operation it is a good idea to perform each operation 1000 (or even 10000) times and measure the time taken. This will remove any problems due to the system clock having a coarse granularity (not ticking very often). Make sure you only time the method and not any input/output associated with it. Your documentation should include a discussion of these results.
Part 2
You decide that your solution to part 1 may be too slow to be useful when used with a real large telephone directory and make the following changes to attempt to improve the performance of your program:
1). Provide a second implementation (ListDirectory) of the Directory interface using the Java Collections List interface and LinkedList classes.
2). The changes in 1) should make adding, deleting and modifying records more efficientbut will probably reduce the time to lookup numbers. To overcome this you use a technique called hashing. Instead of storing all the records on one list you use a series of lists. The data for all people whose surname begins with "A" is stored on the first list, records for all people whose surname begins with "B" on a second list and so on. Write a third implementation (HashDirectory) of the Directory interface using this technique.
Again, you should measure the performance for the best, worst and average cases of implementations 1) and 2) above. Compare the efficiency of each of the 3 implementations in your documentation.
Part 3
Choose one of your 3 implementations from Parts 1 and 2 and embed it in a graphical user interface that allows users to perform all the methods in the Directory interface using a mouse and keyboard appropriately.
View Replies
View Related
May 4, 2014
There are a lot of variables in physics and it is easy to manipulate equations to find the unknown variable. Well, in my program I have the problem of determining which equation to solve for an unknown. You can see I have a timeF, timeI, time, distanceI, distanceF, distance...etc...variables. The way that I have written the code, it will scan for an empty() JTF and assign it as the unknown variable (not sure I can do it this way anymore). At that point, the value is passed into the correct calculation method to process the equation based on a series of case statements in each method...
I know the button arrays I have set up will process correctly in the checkJTF method...and I will need to account for that...but right now my focus is on getting the program to properly calculate the kinematics equations and display the result in the JPanel.
public class PhysicsFrame extends JFrame {
//Kinematic variables
private static float distanceI, distanceF, velocityI, velocityF,
velocityAverage, acceleration, time, timeF, timeI, result;
//Power variables
[Code] .....
View Replies
View Related
Oct 6, 2014
I have an Array of objects that contains strings. I am new to Java and have read books, the Java docs, and searched the Internet for my problem to no avail. How can I get my strings to print in a list so that the user can select an object to manipulate its attributes? I have a class called Instruments and created 10 guitar objects. Here is the code:
Instrument [] guitar = new Instrument[10];
for (int i = 0; i < 10; i++) {
guitar[0] = new Instrument("Guitar 1");
guitar[1] = new Instrument("Guitar 2");
guitar[2] = new Instrument("Guitar 3");
guitar[3] = new Instrument("Guitar 4");
[Code] ....
View Replies
View Related
Feb 24, 2015
I have a string of variable tags (tag) filled with variables, and using a Scanner (scan) to manipulate and generate data dictionary add cards for each. The variables are delimited with new line character, and the variables are structured such that the actual name of the variable contains info as to its data type, size, etc. What I need to do is move the scanner to a particular point into the string then use .nextInt() or similar. I don't want to do this to the whole variable, just where I start it from. How can I do this?
E.g..
/* variables in String tag...
ANS_s20Tx12VDstr
ANS_:Tx67MSvis
ANS_zRx11MSctr
...
..
*/
Scanner scan = new Scanner( tag );
int ptr = tag.indexOf( "_" );
ptr++;
if ( Character.toLowerCase( tag.charAt( ptr ) ) == 's' )
// then start at the "_" character and grab the nextInt()
View Replies
View Related
May 13, 2015
This is the code that I wrote but I have two problem with two buttons one of them ... I want to delete the selected text inside the text Area which represented as b[8] and the other button that I want to select parts of the texts which represented as b[0]....
Here is the code..
package KOSAR2;
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
[Code] .....
View Replies
View Related
Oct 7, 2014
I am new to Java and have read books, the Java docs, and searched the Internet for my problem to no avail. I have an Array of objects that contains strings. How can I get the object's strings to print in a list so that the user can select that object to manipulate its attributes? For example, the user can select "Guitar 1" from a list and manipulate its attributes like tuning it, playing it, etc. I have a class called Instruments and created 10 guitar objects.Here is the code:
Instrument [] guitar = new Instrument[10];
for (int i = 0; i < 10; i++) {
guitar[0] = new Instrument("Guitar 1");
guitar[1] = new Instrument("Guitar 2");
guitar[2] = new Instrument("Guitar 3");
guitar[3] = new Instrument("Guitar 4");
guitar[4] = new Instrument("Guitar 5");
guitar[5] = new Instrument("Guitar 6");
[code]...
View Replies
View Related
Mar 12, 2014
this is the following task i am trying to do. Write an interface Directory to manipulate entries in a telephone directory for the University. The interface must support the following operations:
1) The ability to insert new entries into the directory. Entries should be stored in alphabetical order of surname.
2) Delete entries from the directory either by name or number
3) Provide a lookup method that will find the extension no of a member of staff given
his/her name. You should try to make this method run as efficiently as possible.
4) Change a person's telephone number
5) Print the telephone directory in a neatly tabulated fashion.
Write a class ArrayDirectory that implements this interface using an array to store the telephone directory information. The class must store the surname and initial for each member of staff and their telephone extension (a four digit number which may start with a zero). You may find it useful to define a class Entry to store information about individual entries. The entries should be read into the array from a text file consisting of multiple lines in the following format:
Surname<tab>Initials<tab>Telephone extension
The part that i am stuck on is trying to do the entry method, delete entries method, loop up method, change persons telephone number and be able to print it.
View Replies
View Related
Dec 12, 2014
I am checking how to do following task.
01. pickup the selected text file and read the line by line and output the text in to visual text pane.
what i did:.
01. I wrote code that read the text file and output in to jave console/ also some of the interface.
the code read txt file:
Java Code:
String fileName = "C:/Users/lakshan/Desktop/lawyer.txt";
File textFile = new File(fileName);
Scanner in = new Scanner (textFile);
while(in.hasNextLine()){
[code]....
so it will read any text file dynamically and output to the text pane in interface. I think scanner code must be execute after the select the file from the browser and set the scanned result in to variable. then later out put the var as string in some jswing component?
View Replies
View Related
May 21, 2014
The problem is i want to replace some string text with foreign characters, but JTextArea returns plainText.
For Example:
str = new String();
str.replace('e', 'é');
textArea.setText(str);
but textArea returns plainText.
View Replies
View Related
Apr 17, 2015
I'm supposed to write a GUI application letting the user enter a file on the text field and display its hex representation in a text area and vice versa.
Here's my code:
/*
* To change this license header, choose License Headers in Project Properties.
* To change this template file, choose Tools | Templates
* and open the template in the editor.
*/
package hexconvertor;
import java.util.*;
import java.io.*;
public class HexConvertor extends javax.swing.JFrame {
[Code] .....
It's not doing anything, I don't understand why.
View Replies
View Related
Jan 28, 2014
I have a textField in which I have text in. The text is enter customer name. I would like for this text to disappear whenever the user clicks on the textField to enter a customer name. I am using the automated swing gui builder in NetBeans. Is their some sort of feature for this under properties of the text field? If not then what are my other options?
View Replies
View Related
May 29, 2014
Write a program that reads in a line of text and then outputs that line of text first in all uppercase letters and then in all lowercase letters.
INPUT and PROMPTS. The program prompts for a line of text as follows: "Enter the text: " and then reads in an entire line of text as a String .
OUTPUT . There are four lines of output . The first line is "The text in all upper case is: ". The second line is the line that was read in, displayed in all uppercase. The third line is "The text in all lower case is: " and the fourth line is the original line that was read in, displayed in all lowercase.
CLASS NAMES. Your program class should be called ShoutAndWhisper.
This is what I have so far:
import java.util.Scanner;
public class ShoutAndWhisper
{
public static void main(String[] args)
{
Scanner scannerObject = new Scanner (System.in);
System.out.println("Enter the text: ");
scannerObject.next();
System.out.println("The text in all upper case is: ");
View Replies
View Related
Jan 27, 2013
I'm using JBoss 7.1.1.Final. I'm writing a Spring 3.1.1.RELEASE web application and have a massive amount (~5MB) of text output to send to the browser. I would like the browser to display the output as it is generated, but right now, the browser only displays everything after the servlet's doGet method completes. Here's my method …
@RequestMapping(value = "/mymethod", method = RequestMethod.GET)
public void refreshOrders(final HttpServletResponse response) throws IOException
{
execute(response, myWorker);
}
private void execute(final HttpServletResponse response,
[Code] ....
I set my buffer size to be 1K but that doesn't do anything.
View Replies
View Related
Nov 27, 2014
I am working on a personal project and want to create a text editor to write my code. I am wondering how could I read the last input from the user and if say it was an open curly brace {, then like netbean's my editor will supply the closing curly brace. My java experience is limited but I have tried to read key board input and a few other options that did not work.
View Replies
View Related
