I have a set of 2D arrays, structured as so: int[][] cage = new int[someLength][4]. Each array has a set column length of 4; the first two columns are all that concern us with this problem. They are used to define the row and height respectively of a point (e.g. 2,4).
What I need is to generate all possible permutations of the points using both row and column coordinates from the 2D array. I found a working method to generate all permutations for 1D array of ints here: [URL] ..... , under update 2 of the first answer.
Here is an example of a possible input and corresponding output desired:
In: (1,0) (1,1)
Out:(1,0),(1,1) (1,1),(1,0)
Ideally the result will be stored in a 2D array of ints.
I have a set of 2D arrays, structured as so: int[][] cage = new int[someLength][4]. Each array has a set column length of 4; the first two columns are all that concern us with this problem. They are used to define the row and height respectively of a point (e.g. 2,4).
What I need is to generate all possible permutations of the points using both row and column coordinates from the 2D array. I found a working method to generate all permutations for 1D array of ints here: My link, under update 2 of the first answer.
Here is an example of a possible input and corresponding output desired:
I've been pondering about this algorithm for about a week but I'm still not able to write a "fast" working method/algorithm to solve the Number-of-paths-exercise we were given in my class />
So here's the task: Write an efficient java program "Paths" which solves the following task:
- Read input n ∈ N and give output a(n) which is the number of paths from (0,0) to (n,0) it is not allowed to go over the diagonal (m,m) and also not below the x-axis (m,0)
Here are the allowed steps: u = (1,1), U = (1,4), d = (1,−1), D = (1,−4) and H = (1,0) steps are performed in a two-dimensional-coordinate-system!
Ok Im trying to create a code right now that will take a table of rectangular coordinates and convert them to Polar coordinates in the constructor. I will eventually calculate the total distance between all points in the calculateDistancePolar method but for now I am using it to test.
It doesnt like line 29 and 31 of the class Polar and I cannot figure out why.
public class Test { public static void main(String[] args) { double[][] coords = {{86.92, 2.47},{70.93, 27.81},{97.74, 34.36},{30.90, 35.14},{51.66, 31.70},{0.830, 21.77},{55.91, 66.62},{32.92, 75.23},{65.26, 72.53},{83.90, 4.710}}; System.out.println("X,Y Coordinates are:"); outputArray(coords); Polar myTest = new Polar(coords);
I'm having a random x and y coordinate generate and I need to check if the coordinates are inside of a right triangle on this imaginary coordinate plane.
This program deals with a variation of the geographic coordinate system with Greenwich at 51° 28' 38" N. The program will be adding the three values of one coordinate to the three values of the second coordinate. Though the maximum value for seconds and minutes is 59, the user can enter values greater than that number when prompted. The maximum degree is 360 for this assignment though the user can enter values greater than that number.
I was a bit confused of the code generated by the Axis2 Code Gen.
I have created a logIn(String username, String password) method in my service and used Axis2 Code Gen to generate the Stub.
I try to access the logIn method from my Client using the Stub like below:
TestServiceStub stub = new TestServiceStub("http://localhost:8080/axis2/services/TestService"); String test = stub.logIn("user","pass").
but instead of UserName and password as the parameters, the Stub created a Login object as the parameter for the logIn method. like the one below:
stub.logIn(Login login1);
I wanted to try the logIn method by providing a static userName and password but it seems impossible because the Stub changed the parameter for the logIn method.
The code here I have works fine if I just want to ask the user to enter four digits: //java application that asks user to input binary numbers(1 or 0) and convert them to decimal numbers import java.util.Scanner; //program uses class scanner public class binarynumber{
//main method that executes the java application public static void main(String args[]){ //declares variables
int digit; int base=2; int degree; double decimal; int binary_zero=0; int binary_one=1; //create scanner for object input
[code]....
The thing is, I want the java application to input more than four digits for the user and I want it to loop it manytimes f until the user ask it to stop.
I need to create a Java program that takes an input a color code in HSV and outputs the equivalent RGB code and Vice versa.
Example: If you test on the color RED in RGB: Input: (255,0,0) Output: (0,100%,100%) If you test on the color RED in HSV: Input0,100%,100%) Output: (255,0,0)
According to what I read, "when programming in Swing, your GUI creation code should be placed on the Event Dispatch Thread (EDT). This will prevent potential race conditions that could lead to deadlock." (See below for code.)
Why is this? How could making a GUI lead to deadlock?
public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { createAndShowGUI(); } }); }
I have a assignment in which the code has to scrape a web page for a little bit of data including the link to the next page, follow the link, and do this 100 times. It is scraping all the data correctly, including the link, but it isn't following the link to scrape the data on that next page. Instead, it is displaying the first page's data 100 times. I have the code in a while loop where it reads in one character at a time from the page into a string and then uses pattern matching to get the data and the next link from the string. Then it correctly displays the data and should loop back to connect to that next link and read one character at a time into the string and so on.
I have printed the link to the console and it is good. I don't get any errors. I just can't figure out where exactly the problem is. Here is my code:
I have had to create a text analyser. I have created the program but it is all within the main method. The specification states that I have to have at least two methods within my Program.
import java.io.*; import java.text.SimpleDateFormat; import java.util.*; import javax.swing.*; import javax.swing.filechooser.FileNameExtensionFilter; public class Analyser { public static void main(String[] args) throws FileNotFoundException, UnsupportedEncodingException {
According to what I read, “when programming in Swing, your GUI creation code should be placed on the Event Dispatch Thread (EDT). This will prevent potential race conditions that could lead to deadlock.” (See below for code.)
Why is this? How could making a GUI lead to deadlock?
public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { createAndShowGUI(); } }); }
Code isn't giving me the output that I want and keeps giving me NaN
What I want -
Enter the A value for the line: 2.45 Enter the B value for the line: 4 Enter the C value for the line: -8 Enter the x coordinate of the point: 2.17 Enter the y coordinate of the point: -4
Distance from the point to the line is: 3.9831092774319026
What I am getting
Distance from the point to the line is: NaN
Here is my code-
Tester-
import java.io.*; import java.util.*; class tester { public static double A; public static double B; public static double C; public static double distance; public static void main(String args[])
How do I get my GUI code into a GUI format? I wrote this put it will not make a GUI image.
/* * To change this license header, choose License Headers in Project Properties. * To change this template file, choose Tools | Templates * and open the template in the editor. */ package Ofelia_Inventory_4; import java.awt.*; import java.awt.event.*;
I want to execute my jsp code to compare two dates after every 10 seconds if user enter date and current sys date are equal it will send the mail to the user automatically. Below is my jsp code
this if condition i want to check the date after every 10 seconds and when two dates are equal it will send the mail using below mail code
if(ExpcReDt.compareTo(dateStr)>0) { out.println("Expected return date is greater than current date"); } else if(ExpcReDt.compareTo(dateStr)==0)
public class VargjetUshtrimi2 { public static void main (String a []) { int r[] = new int[11]; for (int i = 1 ;i < 10; i++) {System.out.println( r[i] );} }
The Java-program Matrix below first asks the user for the number of rows and columns in a matrix. After this the program asks for the values of the elements. Finally, program prints the elements of the matrix and their sum on screen. Your task is to create the missing methods. Check the example print to see how to modify the print. When printing the matrix, values on the same row are separated using tabulator.
Program to complete:
import java.util.Scanner; public class Matrix { public static void main(String[] args) { int rows, columns; Scanner reader = new Scanner(System.in); System.out.print("Type in the number of rows: ");
[code]...
Write the missing methods here / Methods are written in the text box below.
Example output
Type in the number of rows: 3 Type in the number of columns: 4 Type in the element 1 of the row 1: 1 Type in the element 2 of the row 1: 2 Type in the element 3 of the row 1: 3 Type in the element 4 of the row 1: 4 Type in the element 1 of the row 2: 5
[code]...
Matrix:
1 2 3 4 5 6 7 8 9 10 11 12
Sum of the elements of the matrix: 78
my code
import java.util.Scanner; public class apples { public static void main(String[] args) { int rows, columns; Scanner reader = new Scanner(System.in); System.out.print("Type in the number of rows: ");
So I am finishing up a GUI that randomly rolls a dice and shows you the dice face from a file that I have on my computer. It compiles fine, but when I open the GUI and press the button "Roll" it gives me errors and does not display the images.