I have a question. How to write a progamme which compensates an average if it is less than a 10/20. I use eclipse and database HSQLDB. I have a table with notes. After the compensates, I must change the note in my database.
I have three notes
12, 11, 5
The average is 12+11+5/3=9,33
I take the lowest note: 5
12+11+x/3 = 10
12+11+x/3 = 30/3
x=30-23
x=7
The new average is 12+11+7/3=10
I am new on this and I will be working in a gpa and average program. This is my code so far: Every time that I try to add the gpa part it gives me errors or just duplicates whatever I've in average and displays it in gpa
/**
* This program shows a database of students in a school.
* It gathers information as name, classes, grades, and calculates average and gpa average.
*
*/
import javax.swing.JOptionPane;
[code]....
I am doing a program that has a weighted average calculation and everything compiles and runs. It is just that my weighted average seems to be calculating incorrectly.This is the type of output I should see:
Homework:
Number of assignments? 3
Assignment 1 score and max? 14 15
Assignment 2 score and max? 16 20
Assignment 3 score and max? 19 25
Sections attended? 4
Total points = 65 / 80
Weighted score = 40.63
Exam 1:
Score? 81
Curve? 0
Total points = 81 / 100
Weighted score = 16.2
Exam 2:
Score? 95
Curve? 10
Total points = 100 / 100
Weighted score = 30.0
Course grade = 86.83
Below is my code and I think even after getting up this morning and looking at it, I have an error in the calculations, but I can;t pinpoint it.This program is supposed to receive input from user, and calculated the grades of a student with a weighted average
import java.util.Scanner;
public class Grades{
private double weightExam;
private double score;
private double curveAmount;
private double scoreTotal;
[code]...
I am having a problem with my program. I can't get my program to calculate properly. Everything compiles and run but its just giving me a wrong answer. I am suposse to get 115.50 but instead I am getting .30...
order.java
public class Order
{
double salesTaxRate; //initializing a variable for the sales tax rate.
double subTotal; //initializing a varliable for the sub total.
double shippingCost; //initializing a variable for shipping cost.
double salesTax; //initializing a variable for sales tax.
double totalCost; // initializing a variable for totale cost.
[Code] ....
I just have not got the chance to spend much time on it lately I know a bit but I'm not an expert or even intermediate with Java so I'm trying to make a program where the teacher enters the grade of each student and its stored in a variable the only problem is if I use a for loop the variable in which the result will be stired will be overwrite by the last repetition of the loop,I think the idea would be a nested loop but how I would go about using it in this situation,
here is my java code.
import java.util.Scanner;
class maths{
public static void main(String[] args)
[Code].....
I am writing a program using a given test drive... I am supposed to write two classes according to the test drive. The calculated correct answer should be 115.50 but i keep getting 115.52 instead and i just can't figure out what i'm doing wrong.
Here is the test drive code:
import java.text.NumberFormat;
public class FinalTester
{
public static void main(String[] args)
{
double avgPurchase;
Order[] lastYear = new Order[4];
[Code] ....
I'm working on a homework assignment and I keep getting a compiler message this is the message
GradesAverage.java:44: error: variable totalgrade might not have been initialized
System.out.println("Over all you have " + totalgrade);
^
1 error
The homework is this Write a program that has variables to hold three test scores. The program should ask the user to enter three test scores and then assign the values entered to the variables. The program should display the average of the test stores and the letter grade that is assigned for the test score average. Use the grading scheme in the following table:
Test Score Average Letter Grade
90-100 A
80-89 B
70-79 C
60-69 D
Below 60 F
This is my code
import javax.swing.JOptionPane; // Needed for JOptionPane class
import java.util.Scanner; // Needed for the scanner class
public class GradesAverage
{
public static void main (String[] args)
[code]....
I keep getting an error that says variable can't be found, what am I missing?
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import java.util.Scanner;
public class testscores extends JFrame
[code]...
For some reason, the averages aren't calculating correctly. I'm aware I need to convert to double if I'm dividing by an odd amount but that itself isn't the issue. It's just simple easy divisible numbers that are not being calculated correctly. For instance, (10 + 10 + 10 + 50) / 4 = should be 2 but I get 10.
Here is the code:
import java.util.Scanner;
public class Avg {
public static void main(String[] args){
Scanner inputGains = new Scanner(System.in);
int userInput = inputGains.nextInt();
[Code] ....
package Program1;
import java.util.Scanner;
public class Source1 {
[Code].....
using netbeans to debug the program but i'm not sure what I did wrong as it doesnt go past test 1
I'm trying to write a program that will output the total number of large,medium,and small pizza along with the average cost of an order. I'm stuck on this error , "Else without if" on line 48 else ...medium.
import java.util.Scanner;
public class PizzaOrder
{
public static void main(String[] args)
{
Scanner input = new Scanner (System.in);
double cost,total, average;
String name,response,size,type;
int count,l,m,s;
[code]....
You are to write a parallel program that will receive a large array of unsorted integers containing digits from 0 to 99. The program will have to calculate the SUM and AVERAGE of ODD number digits between 25 and 75 (inclusive). The user may specify the size or the array and the total processor that the machine has. The size of the array must be divisible by number of processor. Based on the given size, the computer will generate random integer numbers automatically to populate the array.
The program should display the status of the calculation for each processor. The result should be displayed after all calculations are completed.Error messages should be displayed appropriately
a) Write a sequential (non-parallel) program that will accomplish above task.
b) Write a concurrent (parallel) program that will produce the result of the above task.
I have written a simple grade average program. This is my code:
package programs;
import java.util.Scanner;
public class GradeAverage {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
int number;
int counter = 0;
int grade;
[Code] ....
Now the program is working just fine but what I don't like about it is the fact that you have to enter the number of grades before entering the grades. What I would prefer is to write your grades, hit some button that is reserved for calculating the average and then get the output.
I wasn't supposed to use the % in front of f.I have to make a program to calculate the average temperature and annual precipitation in Jacksonville. I get this error on line 49:
java.util.IllegalFormatPrecisionException;
null (in java.util.Formatter$FormatSpecifier)
I don't get any errors during compilation.Here is my code (I'm not using the system selection yet):
import java.util.Scanner;
public class AnnualClimate1
{
public static void main(String[] args)
{
double[] temperaturesInJacksonville = {53.1, 55.8, 61.6, 66.6, 73.4, 79.1, 81.6, 80.8, 77.8, 69.4, 61.7, 55.0};
[code]....
My homework assignment is: Using a do-while statement, write a Java program that continuously requests a grade to be entered. If the grade is less than 0 or greater than 100, your program should display an appropriate message informing the user that an invalid grade has been entered; a valid grade should be added to a total. When a grade of 999 is entered, the program should exit the repetition loop and compute and display the average of the valid grades entered. Run the program on your computer and verify the program using appropriate test data.
When I run it, I don't get the correct average. I know that i'm supposed to enter 999 to exit the loop and to display the average, but 999 is being added with the loop. I'm not sure how to make it not do that.
//stephanie
import java.util.Scanner;
public class gradeAverage
{
public static void main(String[] args)
[code]....
Four experiments are performed, each consisting of six tests. The number of test results for each experiment is entered by the user. Write a Java program using a nested loop to compute and display the average of the test results for each experiment.
You can run the program by entering the following test results:
Experiment 1 results:23.231.516.927.525.428.6
Experiment 2 results:34.845.227.936.833.439.4
Experiment 3 results:19.416.810.220.818.913.4
Experiment 4 results:36.939.549.245.142.750.6
How do i write a program using textEdit? I can't even get the examples to open?
View Replies View RelatedI am to design a program in java that will allow a user to Input a list of your family members along with their age and state where they reside. Determine and print the average age of your family and print the names of anyone who live in Texas. I have tried but my results are wrong.
View Replies View RelatedMy program successfully reads a file, reports back what it finds and creates an output file. However, I cannot get it to write to the output file, it is always blank!
Here's my code:
import java.util.Scanner;
import java.io.*;
public class Ex19
{
public static void main (String [] args)
{
//Variables
[code]....
I have to write a program that find the sum of two numbers 62 and 99 and stores them in a variable named total. However, I have one error that I just can't get rid of and can't tell what it is. I'm using jGrasp and here's what it says:
Programming Challenge #5.java:14: error: class SumofTwoNumbs is public, should be declared in a file named SumofTwoNumbs.java
public class SumofTwoNumbs {
^
1 error
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
and here: is my code:
import java.util.Scanner;
/*
* To change this license header, choose License Headers in Project Properties.
* To change this template file, choose Tools | Templates
* and open the template in the editor.
*/
/**
// This program has variable of several of the integer types.
public class SumofTwoNumbs {
public static void main(String[] args) {
[code]....
Write a program called GeometricMean that prompts the user to
1.Enter the number of values (total number of instances) that should be processed
2.A set of values to be processed (in a while loop)and then calculate the geometric mean of the values entered. You should use a while loop to perform the multiplication part of the calculating the geometric mean. The program should output the initial data and the labeled geometric mean. Consider printf, and DecimalFormat.
My Program:
import java.util.Scanner;
public class GeometricMean{
public static void main(String[] args) {
Scanner keyboard= new Scanner(System.in);
[code]...
Write a java program that uses a While loop and persistent output to count down from 33 to 0 by threes, and put each value on a separate line, also do this in for loop.
View Replies View RelatedHow to Write Program with out using control structures
IMG_4216.JPG
I'm trying to use graphics for my programs and here I'm trying to write a program that searches through files for text received from a JTextField. However, it does not seem to be working as my message is not displayed when text is found...
I used applet. Here are the functions:
JTextField jtf;
JFrame jf;
public void init()
[Code].....
I'm rather new to programming and I'm trying to make a gui program that will allow the user to create text files. They will be prompted to enter what they'd like to save their file as and then they will be allowed to input text to that file . They will also be allowed to open their files to modify or view its contents. So to start things off, I'm making a prototype if you will.. I've been able to save to a file the problem occurs when I try to read/display it.
Main Class:
public class MainActivity {
public static void main(String[] args) {
// Access to other classes
WriteFile writer = new WriteFile();
ReadFile reader = new ReadFile();
[Code] ....
My code:
public class Fibonacci {
/**
* @param args
*/
public static void main(String[] args) {
int f[]=new int[100];
for(int j=0; j<100;j++){
f[j]=j;
[Code] ....
How can I improve my code?