Before continuing a task, any more accurate way to identify hashes? Currently, I am using regex + length of hash to give the user possible hashes.
Identifier class:
package votek;
* Purpose: Class is used to run checks on possible hashes that the user has entered.
*/
public class Identifier {
//Hash entered by user is stored here
private String hash;
//String that will contain all possible hashes to share with user
private String results = "Possible Hashes: ";
//Method that runs the other hash methods checks and prints out the results.
I am currently taking a computer science class in high school, and its my first time programming (2 weeks since i started). I have currently finished my program however there were a few details that bothered me. I was supposed to create a program which can calculate average of individual marks and then calculate all of the average marks previously entered by user. However I noticed something that bothered me, which was the fact that if i were to enter a number when asked to enter a name, it would assume that number is a name. Also when I asked for the 5 marks the program would run fine until an error occurs if i accidentally type in a letter or word. I have done some research and found system scanners however i still don't understand the concept in a looping situation. Here is what I have so far.
import java.io.*; public class loopingEx6Final { public static void main(String args[]) throws IOException{ BufferedReader br = new BufferedReader(new InputStreamReader(System.in)); double average, totalaverage = 0; int Mark, Marktotal=0, marktotalsum=0, count=0;
Basically I need to make a program prompts the user for an integer, check to make sure the length entered by the user is a power of 2 and at least 2. Then I need to convert from base e to base 2 then I need to print the tick marks of a ruler based of the value of the length.
I got the whole converting thing working and the check for a power of 2, that wasn't an issue because it didn't require any recursion. I just don't know how to print out the proper tick mark values.
The way it is supposed to work is that it needs to look like this. Say the user enters 8;
012131210 012345678
Or if the user enters 16;
01213121412131210 01234567890123456
The bottom row is pretty much just the index value, that I print fine.
The top row though is supposed to be the length of the ticks on a ruler, with the middle most value being the value of the conversion from base e to base 2 from above. I can get that printed and what I get just looks like this.
For 8;
000030000 012345678
For 16;
00000000400000000 01234567890123456
As you can see I can get the middle value and the index values below but I don't know how to use recursion to get the right numbers.
Here's my current code.
import java.util.*; public class TickMarks { public static void main (String args[]){ Scanner input = new Scanner(System.in); boolean looping = true; while(looping == true){ System.out.print("Please enter a length: ");
[Code]...
Now the methods isPowerOfTwo() and printLength() both work fine. However, I'm not sure how to get the left and right side working.
My thoughts were to split the length in half and get a left and right side. I gave both of them arrays so I can keep track of the values. Now as you've seen above I get all zeros and I know it's because that's the default value in an array, I just don't know how to get the proper values.
I have a GUI with a textArea for the user to input numbers, a button which should "listen" for those numbers, and then a textField to display the sum. I have my code working for user input of one number; but I'm at a loss as to what sort of loop I need to create to get it to read each line of input. I wasn't sure whether to put this in the beginner forum or here, because I am definitely a beginner.
My program seems to work ok when i enter number in order like 1,2,3 = true , and all the numbers for false seem to be working as well! my problem is when i enter number like 3,2,4 that are not in order but still are consecutive!! I thought that another if statement would be the solution but i have tray several different ones and still can't make it work !!!
Java Code:
import java.util.*; public class Consecutive{ public static void main (String [] args){ Scanner console= new Scanner(System.in); System.out.println("Enter three numbers"); String numbers = console.nextLine();
Ask user to enter a name alphabet by alphabet, and print d whole word as output,,,,,, use while loop?Since i am new to JAVA..i have no clue on how to begin?
I'm trying to implement a playlist class that creates a playlist from songs that the user has entered. Basically, it'll have the following requirements:
There can be a maximum of 2 playlists. Each playlist holds a maximum of 3 songs. Can't be over 12 mins. Can't be over 10 MB. Can't use arrays (a real pain).
I'm really struggling with how to even go about this. I'll post majority of my code below, I know a lot of it can be condensed/improved but I'm just trying to focus on functionality at the moment.
Interface class:
public class Interface { Scanner console = new Scanner(System.in); private SongDatabase database = new SongDatabase(); private Playlist playlist = new Playlist(); private int songCount=0;
[Code] .....
In short, the aspects that are relevant to the playlist functionality are the addSongtoPlaylist() method in Interface class, the getSong() method in SongDatabase class and the Playlist class.
/** * Auto Generated Java Class. */ import java.util.*; public class Hangman { public static void main(String[] args) { Scanner input = new Scanner (System.in); int guess; boolean revealed[] = {false, false, false, false, false}; String word [] = {"c", "a", "n", "a", "d", "a"};
[Code] ....
I am not sure how to make the program check if the letter entered by the user matches the one in the array. also i am not sure how to make the program run again with a new word.
I have the code below that just keeps getting the user's name and displaying it until the user enter's an empty string. Well, to simulate that, I just hit the keyboard instead of entering any name but for some reasons I am not seeing in my code, the programme just keeps looping.
System.out.println("Enter your name : "); Scanner st = new Scanner(System.in); while(st.hasNext()){ System.out.println("Enter your name : "); String name = st.nextLine(); System.out.println(name); if(name==" ") break; } System.out.println("you are out of the while loop now!!");
I have returned with yet another problem but I think this one might be a bit easier to fix.
So the whole MO of this program is to take user input, and display the sum of the digits of the number they entered. I am supposed to do this by utilizing methods. So far this is what I have and when I compile it tells me that it "cannot find symbol", which I don't understand as I define what "m" is in the for loop. The other error is that it says:
"Exercise6_2.java:22: error: incompatible types: possible lossy conversion from long to int return result; ^
I don't understand why it's giving me this error nor do I understand why result seems to inherently be an int. (Also the public static int sumDigits(long n) method was given to me by the book so that is what I am supposed to use).
import java.util.Scanner; public class Exercise6_2 { public static void main(String[] args) { Scanner input = new Scanner(System.in); System.out.println("Enter a integer"); long n = input.nextLong();
I need to write a Java program to perform a mathematical calculation between two numbers entered by the user. User has to choose the mathematical operation and input it and then when the user enters 2 numbers, he gets the answer. When user enters any other character other than *, /, + and - he should be able to exit. Perform calculation between numbers should be until user decided to exit from the program. My code is below, calculation part goes well, but can't get it exit when user enter any other character.. How to fix it?
import java.io.*; public class q11 { public static void main(String[]args)throws IOException { InputStreamReader ISR=new InputStreamReader(System.in); BufferedReader BR=new BufferedReader(ISR); while(true){ System.out.println("Enter.."); System.out.println("* : For multiplication");
I have a drop-down which contains the four sections simple buttons(filters). When click any of these buttons some settings are applied. I have successfully auotmated it using simple if else and switch but in that case i have to use 8 parameters(8 are the number of button)
public void editFilters(WebElement filter1, WebElement filter2, WebElement filter3, WebElement filter4,WebElement filter5,WebElement filter6,WebElement filter7,WebElement filter8 String edit, String expectedColour) { switch (edit) { case "selectFilter": if (filter1 != null) {
[Code] .....
But want to make it more effective by using hashes. I do not want to use 8 different parameters to perform action on the respective button.
So now what i want to implement.
Create a method in which i pass the parameter1 as hash and 2nd parameter as 0 or 1, 0 means unSelectFilter and 1 means select the filter.
With parameter 1, in code i want to pass the name or xpath or anything else for any number of filters , that those filters names should be stored into that hash and then by passing 0 or 1, i can select/unselect those filters.
Logic her eis when user selects option1, it asks for user to enter name and as soon as user enters name, it should compar name to existing names in txt file. I have user while loop and for loop but for some reason, it doesnt compare properly as there seems to be some mistake in looping and it just read first line or you can say single line rather than comparing it with all lines in txt file. i have attached votes.txt file with this. Also, if user doesnt exists infile, it will ask user to enter vote as yes or no and add it to file and then count total number of Yes and No votes from file and compare them.
my votes.txt file looks as below with two columns namely (name and vote).
Hiren No samir yes bob no rikul no master yes patrick no summer yes bhanja no
I'm trying to learn Java and my current project is to write a short program to determine the factorial of a number entered by the user. I haven't looked. There may be a method that will do it, but I want to use a for loop specifically.
What I have compiles just fine. I'm actually pretty thrilled just with that. Here is what I have:
class factorial { public static void main( String[] args) { Scanner scan = new Scanner(System.in ); int num; int product = 1;
Write a Java program that asks the user to store 10 numbers in an array. You should then print the array in the order entered and then print in reverse order. However, instead of putting all the information in the main, you should use a class called PrintIt. The PrintIt class should have an instance variable that is an array to hold the numbers. You should have a method that will print the array in the order entered. You will also need a method to print in reverse oder. Then create a tester class that asks the user to enter 10 numbers and puts them in an array.
So far I've got this.
public class printIt { int i; int [] numArr = new int [10]; public printIt () { i = -1;
[Code] .....
Output:
Enter a number:
8 34
Forward:
8 34
Reverse:
34 8
end
what i want as an number is being able to print out 10 numbers but this only lets me do two numbers. Why is that so?
The project is a program that allows the user to enter students and enter grades for each student. One of the requirements is that if there is already a grade stored for the student that it will display the previous grade. IF the user then enters a new grade the new grade will be stored. IF the user simply presses enter (enters an empty string) nothing is done. I have everything working except for the requirement of doing nothing if the user enters an empty string. If I just press enter at this point I get a NumberFormatException.
The below code is a method "setTestGrades" from the student class. This method iterates through each student object stored in an array list and then checks if there is a previous grade (Requirement# unset grades have to default to -1) before allowing the user to set a new grade.
public void setTestGrades(int testNumber) { //Sets the grade for the specified test number for each student in the arraylist. testNumber -= 1; Scanner input = new Scanner(System.in); for (int i = 0; i < studentList.size(); i++) { System.out.println("Please enter the grade for Test #" + (testNumber + 1) + " For Student " + studentList.get(i).getStudentName());
I am new to Java and I am doing an assignment to identify Class and Attributes from below example. How to identify 7 classes and its attributes from this scenario:
ABC Maps Maker produces electronic maps for global positioning systems. Every map needs to define the latitude and longitude of the centre of the map, together with the length and breadth of the map. A map also has a name, and a set of geographical features.
A geographical feature is something noticeable in a a map; e.g., a hill, or valley. Among the types of features are the following: trace features, track features and tract features.
All features have a name that is displayed on the map next to the feature. A trace feature has a coordinate point to indicate its location relative to the centre of the map. Broadcasting stations, mountain peaks, and transmission towers, are examples of trace features. Every trace feature has a description associated with it.
Examples of track features include roads, railways and rivers. Each track feature has a list of points that define its course, and a line pattern. The line pattern specifies the colour, and the thickness.
Like a track feature, a tract feature also has set of points, except that when drawn on the map, the last point is linked to the first point to enclose a complete region. Additionally, it has a fill pattern which incorporates essentially a colour.
Recall that there is a class, Point, in the java.awt package – this can be used to hold the co-ordinate of a point
I recently had to work on a very simple banking application. Since customers provide their account numbers when they go to the teller to perform a transaction, I chose account number as the key to uniquely identify a customer. To address the fact that a customer can have multiple accounts, I decided to have an entry for every account the customer had, as part of my Teller class, so that he can identify himself with any of his active account numbers. When I was discussing this design with my friend, he felt it was bad and that I had to have a CustomerID field to uniquely identify a customer. I can't seem to understand why we can't do that with account numbers belonging to the customer?
Is there a way of detecting the file's type (whether it is a pdf, jpg, png,or anything else) by reading the content of the file. We could read the extension of file to determine it's type, but then extensions can be forged too. So I would like to know if the content inside a file is of a particular type or not. I'm not sure about this, but I have heard somewhere about each having having a specific kind of header which determines its type. So is it possible to read that header and determine it using a program?
I'm having trouble with the last few lines of the code. It's supposed to take a replacement string entered by the user and print out the new string. For some reason it's now allowing me to enter a replacement string
import java.util.Scanner; public class Project02 { public static void main(String[] args) { Scanner keyboard = new Scanner(System.in); System.out.print("Enter a long string: "); String lString = keyboard.nextLine();
[Code] ....
Output:
Enter a long string: the quick brown fox jumped over the lazy dog Enter a substring: jumped Length of your string: 44 Length of your substring: 6 Starting position of your substring in string: 20 String before your substring: the quick brown fox String after your substring: over the lazy dog Enter a position between 0 and 43: 18 The character at position 18 is x
Enter a replacement string: Your new string is: the quick brown fox over the lazy dog <------ isn't taking user input
initialize the min and max to be the first numbers entered, need to improve the code, because if the number entered is < 0 there is an error. but i dont understand how i would initialize to the first number entered, my understanding is tha if the user enters a 5 , then i should initialize to value 5, but i cant anticipate what the user will enter. I could initializa to null, but that still is not the first number entered.
int min = 0; int max = 0; int option = JOptionPane.YES_OPTION; while ( option == JOptionPane.YES_OPTION){
I just can't find a way to check if user puts any input or not? The line is Employee Name and I need to validate that he puts something there.
import java.util.Scanner; public class JavaMartInventorySystem { public static void main(String[] args) { String empName; Scanner keyboard = new Scanner(System.in);
