1. When we have a view and this uses two or three managed beans and not only one, is this ok? is a good design?
2 If we have two views and both of them only share one functionality (they need to display datatable with clients) , for the second view and for the shared functionality, should I in the managed bean for the second view create the same method that gets the clients or reuse the method in the managed bean created for the first view?
In my case my managed bean is View Scoped and it supports a UI page which has multiple forms and each form is submitted as AJAX POST request.
As per the statndard, setting restriction to 5 should create 5 views and after that based on LRU algorithm the oldest views should get deleted if 6th views is created.
Therefore any action on the oldest view will throw the ViewExpiredException and i simply redirect the user to view expired page.
1) When i set the restriction to 5 views, i open 4 tabs with 3 forms each. 2) I submit the 3 forms on first tab everything works fine. 3) As soon as I go to 2nd tab and submit the first form thr, i get view expired exception 4) It seems I am exceeding the number of views I mentioned in web.xml
I want to know :
1) Does every AJAX POST submit itself creates a view ? 2) How I can count the number of views created in a session ? 3)Can i force expiry of a view in JSF 2.0.2 while the session is still alive ? 4) Normally JSF 2.0.2 session cachces the views. Lets assume session is alive the entire day but a view was created in morning at 9:00 AM and is not used again the entire day. Assuming that session doesn't reaches the max number of views it can save in entire day, will the view created in morning expire on its own after certain interval of time ? If not , can we still force its expiry while keeping the session alive ?
I have a JSF bean which is request scope and corresponding JSF UI page. when user tries to open this page, we are getting exception 'Cannot instantiate user.java class <default constructor>'. This does not come always. It comes very rarely. JSF version is 1.2
I have a situation to load data while JSF page loads. Also have a filter which populates user information from http request.
I was expecting the filter first to populate the user information and in the managed bean get method to verify the user information and get the data (from database). But in this case i see the managed bean get method is invoked before filter populates user information and i get null pointer exception because the user information is null.
I had to work around to get the user information from FacesContext in the managed bean get method because the user information wasn't available. Is there a way to make sure the filter is invoked first?
I'm using a PrimeFaces UploadedFile xhtml page to select a csv file to read and write using a managed bean (SuperCSVParser.java). The file is read and written to an entity class which then persists the data to a database. The application works fine if I specify a file path on the physical server and select a csv file on that file path. But for the production version I want the user to select ANY file name from ANY directory on their local system.
I know about the FacesContext methods and I've looked at some methods from the java.io File class. Most of these methods are about getting the path from the server, where I want to 'pass' the path String from the client machine to allow the uploaded file to go through. When I try with the below code I get:
java.io.FileNotFoundException: data.csv (The system cannot find the file specified)
I'd like to know what I'm doing as I prefer not to explicitly declare a path in the final app. I'm almost sure that's possible.
I have a requirement where in my primefaces datatable ,the filterMatchMode attribute(like any part of field,whole field) needs to be selected by the user by select menu .
To achieve this i have declared a variable in my viewscoped managed bean as filterCriteria and set the filterMatchMode attribute as filterMatchMode="#{beanName.filterCriteria}".The bean variable is getting set in the managed bean on submit but the filtering is not happening,i am getting empty message.
Also when i remove the keyed in value from filter box the data table is not restored which otherwise must be restored in normal situations. I have used and modified the example code given in primefaces showcase here.The code snippet is as below
<h:form id="tblFrm"> <h:selectOneMenu id="filterOptions" value="#{dtFilterView.filterOption}" required="true" requiredMessage="You must select an option!"> <f:selectItem id="hd1" itemLabel="Select" itemValue="#{null}" />
i want to list files from resources folder like this:
@ManagedBean public class galley implements Serializable { private List<String> list; @PostConstruct public void init() { list = new ArrayList<String>();
[Code] ....
but it give me a null pointer exception on fList .... The directory of resources is :
I read JEE6 doc and confused with : Does container managed entity manager (injected by PersistenceContext annotation) is thread-safe in stateless session bean in multiple-thread env?
See code below, if there are 2 requests to stateless sesion bean in 2 concurrent threads , is it using same Entity Manager Instance or not?
@Stateless(name = "HRFacade", mappedName = "HR_FACES_EJB_JPA-HRFacade-HRFacade") public class HRFacadeBean implements HRFacade, HRFacadeLocal { @Resource SessionContext sessionContext;
I am developing a web application using JSF-2.0 on weblogic 10.3.6. I am using Facelets as VDL. I have 5 different machine. They are different according to their OS and their geographical location. On my first xhtml page server (machine) is decided. Then on next page file upload and rest of processing takes place. My restriction is that SSO configuration can be done on only one machine.
So I am restricted to using xhtml files from only my primary server where SSO configuration is done. But I have to connect to servlets or managed-bean of different machine as requests are machine specific and file needs to be uploaded to those machines for processing. So I cannot use redirectUrl as I need to be only on one machine. Is it possible that xhtml on one server can talk to managed-bean on other server(different machine)?.
What i have done till now is i make a table in html explicitly (by assigning fixed rows and columns) . Now what i want is to show a table of whose number of rows and columns are generated dynamically according to the table in the database.
I am building a room management system in Java (Netbeans) and Ms Access. The jasper report is only showing code (source view) instead of design view. The GUI JFrame and Login JFrame are not displaying records in the database and the buttons are not working. Also the labels and text fields are not neatly arranged. The connection to the database is not displaying records.
Connection to the database. COIRMS.java
package Login; import java.sql.*; public class COIRMS { Connection con; Statement st; ResultSet rs; public COIRMS ()
I'm training myself with the EJB 3 technology. I would like to create a stateless bean that instead of returning a String, it returns an object. I tried in the same way I did with the first exercise, but I'm getting several errors.
I have a project I am currently working on using Primefaces and MySQL. I have a page that will display information queried from the database. I have textfields that will display the data from a given record. But I want to ensure that the displayed data cannot be altered. I decided on disabling the textfields unless the create or edit button were clicked. At which point all textfields will be enabled for editing, and cleared if create button was clicked. I want to push the disabling/enabling of the elements back to a managed bean, but I want to have the bean take in two lists or arrays, one containing all elements by ID and one containing a list of exempt elements. Is there a way I can create a List or Array of the ID's that I can send to the bean? I know little in Javascript and previous attempts to implement it have met with little success.
I want to create a list that would contain all and another that would contain the exemptions such as searchField, searchCriteria, searchButton, projectList and viewButton. The actual exemption list is far smaller than the list of all children. I have found sources that can disable the elements with a java bean, but I have not been able to find one that would allow me to define those that should and should not be disabled, then vice versa for enabling.
But resource.returnString(r); gives a org.apache.jasper.JasperException: java.lang.NullPointerException I started the glassfish server in debug mode and found out that "resource" was null. but @PostConstruct in singleton does print which means singleton bean exists.
Can we call singleton beans with no interface in such a way form a session bean? I actually want to acquire instance of singleton bean when a client invokes method in Client bean...
I'm new to JSP but I've to use it to grab data coming from an external site, pass data to a Bean, write data in a DB and redirect the user to another page. Follow the JSP page.
<%@page import="EJB.getResponse"%> <% long paymentID = Long.parseLong(request.getParameter("paymentid")); String responsecode = "9999"; getResponse g = new getResponse();
[Code] ....
This is the bean:
@ManagedBean @RequestScoped public class getResponse implements Serializable { private Long paymentId; private String result; private String auth;
[Code] ....
On the console I see the prints but I receive the NullPointerException
WARNING: StandardWrapperValve[jsp]: PWC1406: Servlet.service() for servlet jsp threw exception java.lang.NullPointerException at EJB.getResponse.printData(getResponse.java:72) at org.apache.jsp.notify_jsp._jspService(notify_jsp.java from :60) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
I have a primefaces editable datatable with column filtering feature.The datatable has live scrolling feature.The problem that i am facing here is that both filtering and scrolling are happening correctly with Request scoped managed bean but when the scope of the same bean is changed to view scope(javax.faces.bean.ViewScoped) then the filtering happens but on removing the keyed in key word from filter box the table content is not reset to original state and also i am not able to scroll down to next set of records on reaching the end of scrolling.Cell editing feature is working perfectly.
One thing that i observed is ,currently i am querying 5000 odd records to load into datatable.But if the number of records is limited below 5000 scrolling is happening correctly but problem with filtering remains same.I even tested by upgrading to Primefaces 5.1 from 3.Code snippet of xhtml page
I'm wondering if there's a way to build a template for managed beans which could be extended by a constructor instead of re-writing beans for each entity. I can do that quite easily for Dao objects by creating facades and using those facades to create Dao implementations for specific entities. Not sure if the same concept works for managed beans and haven't really come accross any searches.
I wrote the following but I'm not sure how to implement or even if the concept of generics and templating can be applied to managed beans in the same way it can be applied to Dao classes:
public class BeanTemplate<T> { private ListDataModel<T> listModel; @EJB private GenDao dao; private Class<T> entityClass;
[Code] .....
The above assumes there's only one method needed in the bean. I thought of extending like this:
public class EmployeeBean extends BeanTemplate<Employee> { public EmployeeBean() { super(Employee.class); }
// how can the methods be called??
Is the same concept for creating dao templates possible for managed beans?
I'm doing a little game in Java and I would like to insert a background music managed by a JButton. When the button is pressed, the music starts and then, to stop it, the button is pressed again. If you don't press the button to stop the music remains in the loop until the player plays.
I finish reading The EntityManager Interface in JEE tutorial. I know I can use container manager entity manager in EJB, but I want to explore how to use application managed entity manager in EJB.
Can I use application managed entity manager in EJB (container management JTA transaction is used)? Where do I should close entity manager if can?
The following is an example from JEE tutorial, but didn't find where to calose entity manager. and can I create mutiple EntityManagerFactory objects and Entity Manager objects to use them in a JTA transaction?
I have an in-cell editable data table with a viewscoped managed bean.I found that the control never goes to the ajax event method onCellEdit when the scope of the bean is @Viewscoped but it works when the scope is changed to request scope.how to get this feature work with viewscope.Below is my code snippet
I have tried this example ([URL].../) with CarDao extending the BaseDao, it works like a charm.However, from the CarDao class, my NetBeans underlined the class name “CarDao” with the error message “A session bean must not extend another session bean.” But I can compile, deploy and run the application without any problem.
I have also heard that a session bean cannot extend another session bean, but why it works here?
I am using Java EE 6, NetBeans 8.0.1 and WebLogic 12c for this code testing.
I have two images. I want to be able to click them and kick off a call to a listener in Java to change a value in the bean. I also want the view to update my dropdown (labeled "menuModel") to either be rendered or not, depending on which image I click. Alternatively, I would be fine with the dropdown simply being disabled and enabled for the same criteria.
So far, the listener kicks off fine, and the value gets updated correctly in the bean. However, the view never gets updated. I have tried this a hundred different ways, but nothing seems to work. If I hit refresh on my browser, the view updates. But I want it to do it automatically.
Is it possible to map URL's with independent view dir structure? If so how?
My goal is to simply point an url to a specific view file:
i.e.
[URL] ....
to not/default/path/views/main/index.xhtml and www.myserver.com/application/admin/ to not/default/path/views/admin/index.xhtml
A couple solutions I found so far where:
Solution 1
PrettyFaces
I just didn't wanted to use a third party solution. This is my best solution so far.
Solution 2(a JSF solution):
navigation rule entries in the faces-config.xml file.
A bean is required, not a bad thing in above example but not great in combination with static navigation like:<h:commandButton action="index"/>
Solution 3 (another JSF solution)
Resource Library Contracts This forces me to work in the contracts file.
None of the solutions gave me a clear solution except prettyfaces.
Are there some elegant native JSF solutions ? Something flexible and reusable? Something like a mvc controller i used to use in php applications. In this controller I was able to add a template file in the constructor and an content file in specific function. Custom paths where no problem. I didn't want to use mvc nor the php language in this project.
create an application following the MVC pattern. My frame is composed of a JTable with some JComboBox and classic next/previous buttons to page the table. The table shows data of current accounts of the members of a family. My problem is figuring out how the controller interacts with the view, for example to enable / disable buttons or reset and reload the data in the comboboxes. In the view class all the graphical components are private instance variables. What is the best approach to ensure that the controller can act on them?
I need to create in the view public methods to act on each component like getSelectedItemAccountCombo, getSelectedItemYearsCombo, getSelectedItemMonthCombo, populateAccountCombo (ArrayList <String> list), setNextButton (boolean b) ... and so on (I think that the methods would be many ...) This approach does not convince me because I think that the class is fouled by procedures that should be in the controller class.
