1. If we have and xhtml page and we just have a datatable to show some records through a managed bean, I think there is no validation phase, apply request values phase... so it would be a faces request but not with the lifecycle of a jsf request, right?
2. In the previous case because the normal phases of a jsf request are not going to be called, the method that will be called in the backing bean to get the records, could be called more than once although its not a normal faces request?
my Servlet as I would like my Servlet to run first and to create a session var then forward the value to the JSP (the GUI ) and have the JSP able to send a var back to the Servlet for reprocessing and update the session var to again be sent to the JSP and so on . - The Servlet contains logic to handle incorrect input types and directly out puts a HTML error page..
Below I will add the code I have so far and a link to the question in my Text Book.
My code:
JSP Page:
bank.JSP :
<% //Starts outputting the HTML Form %> <html> <head>
1. Does a GET HTTP request contain a request body? If yes what is contained in it? Are the request headers also part of the request body? 2. Is it possible to send a byte array as part of the GET request in its body? 3. Is there a size limitation on the data that can be sent via a GET request?
I am using jsf rich faces to dispay the page. Pagination is not working in the same page.Problem here is i am able to see the first page only for the pagination functionality.
URL....In the mentioned project in this blog I used Spring Web Flow to satisfy some requirements but now that development of the Spring Web Flow stopped I like to check what Faces Flows can present to satisfy the same requirements.From a quick look similarities between Spring Web Flow and Faces Flows are obvious but there is one specific point I like to ask.In SWF it is possible to define flowing element at the beginning of an flow.
which will trigger an event when you will start executing a flow, I look to the Faces Flows flow descriptors but I can see an element that fullify similar requirement.similar functionality built into the Faces Flow or not?And is there a way to configure Faces Flows that it reacts to events from the users like the following.
I have a requirement like in a Rich datatable, and i have placed two links up and down in one of the column of each row, here i wanted to swap rows (move up/ down ) the rows when i click the link on a perticular row. is it possible with jsf/ java script?
I have a requirement where in my primefaces datatable ,the filterMatchMode attribute(like any part of field,whole field) needs to be selected by the user by select menu .
To achieve this i have declared a variable in my viewscoped managed bean as filterCriteria and set the filterMatchMode attribute as filterMatchMode="#{beanName.filterCriteria}".The bean variable is getting set in the managed bean on submit but the filtering is not happening,i am getting empty message.
Also when i remove the keyed in value from filter box the data table is not restored which otherwise must be restored in normal situations. I have used and modified the example code given in primefaces showcase here.The code snippet is as below
<h:form id="tblFrm"> <h:selectOneMenu id="filterOptions" value="#{dtFilterView.filterOption}" required="true" requiredMessage="You must select an option!"> <f:selectItem id="hd1" itemLabel="Select" itemValue="#{null}" />
When I have a datatable of primefaces with paginator and its only readable and not editable, its not needed to be inside of a form, right? although I have seen it many times inside of it
I am having a hard time trying to wrap my head around trying to get a couple of columns in a datatable populated with values from a @OneToMany collection. The concept is simple but my brain refuses to grasp it!! I will try to make this brief...
I have several forms built with primefaces 3.5 using NetBeans 8 IDE on a JBoss EAP 6.21 server, and JPA 2.1 annotations. Data is extracted from an Oracle 11 database, which consists of several lookup tables, as well as a primary table and secondary table. Using the EntityManager createQuery method I query the database, which of course returns a resultset. The query grabs all records from the primary, as well as values from 2 specific columns of the secondary database, based on search criteria entered by the user on a primefaces search form. The returned results are then iterated through, this is where I am trying to get the values from the secondary table to populate specific fields in the datatable.Here is the applicable code from the list.xhtml form containing the datatable:
As odd as the code may look (and I will completely understand anyone cringing as to some of the coding methods I use), specifically with the ui:repeat tags nested inside the datatable tag of the list.xhtml form, I strangely do see the values from the secondary table showing up in the form showing the results in a datatable. However, when the user clicks on a specific record in the returned resultset listed in the datatable, another form is opened and populated with the values from the datatable, but the 2 fields on that form that should be populated with the 2 values I referred to before from the secondary table (i.e. policy1Num and totalPayoutAmt) do not have the values in them.
This is partly because I have those 2 fields in the editable form pointing to the managed bean of the secondary table (code from that bean not shown here), rather than the same "polNum. policy1 Num" and "totPayout.totalPayoutAmt" var I am using in the list.xhtml form. How those values are being successfully returned into the datatable of the list.xhtml form - I happened to "stumble" across the use of the "polNum" and "totPayout" vars with the "policy Payment Collection" list. I do not know how to do the same thing for those 2 fields in the editable form.how a datatable gets populated, specifically with values in a @OneToMany collection,
I used Primefaces 4.0.7.I has trouble with checkboxes, which are not change,with unselected checkboxes when I press . I mean, i selected someone from selectone menu in my bsPanel(first panel) and then the datatable fills with his/her duty.Then I select all the duties in the datatable to assign to someone else in bilgiPanel. Then duties assign this person and then i choose same person in the top panel(bsPanel),then datable seems with selected sutiesHere xhtml file;
I have created one dataTable in page and shown some columns but I want to show only those columns which have entries ( if any column doesn't have record then it should not be displayed on the page.) . How should I put validation on this and display table.
I have requirement, in that I am showing a Datatable, above that table i have form in that i can register a employee, after clicking on submit employee data have to be saved in the database aswell as i have to update datable, so that I can see that registered employee in that Datatable, how can i full fill this requirement. I am using jsf 2.0, ejb3.0,jpa 2.0.
In managed bean I am calling this service as fallow in init method, and i am binding same this. employee list to UI
public String getAllEmployeesfronHr() { this.employees = customerservice.getallEmployees(); System.out.println(this.employees.size() + "=================size of employee"); return ""; }
For every submit button click i have to query database or is there any mechanism to update List / can we use entity manager in anyway so that we can update Employee List....
When i click on 'Add Invoice' button open a dialog box. input data in dialog box. After click on 'Save Invoice' all the data of dialog box is render in primfaces datatable. After that click on 'Save Invoices' all data of primefaces datatable and HTML table data are store in ipsDetail and Invoice object of Managed Bean class.
Here, Problem is ipsDetail elements NULL when click on 'Save Invoice' button in addRow() so that primefaces datatable not updated. So that i can not insert new invoice data in database table.
I have a bookings table where customers can view their bookings and in the table there is a button with a command button that onclick goes to the dialogue to display the variable petUpdate value but if you have 2 bookings then all the update buttons display the value of the last petUpdate in the arrayList.
DataTable with the button
<p:dataTable id="bookingTable" var="customerBooking" value="#{booking.sessionBookingList}" editable="true" style="margin:0px 0px 20px 100px;font-size:15px;width:600px;" >
Code in the above datatable.......The commented out output label displays the correct value for each but when the button is clicked the dialog only displays the last ones value
Write a class named FileDisplay with the following methods:
1.) constructor: the class's constructor should take the name of a fil as an arugment. 2.) displayHead: This method should display only the first five lines of the file's contents
Here is the following code I have made so far
import java.io.*; public class FileDisplay { private String filename; public FileDisplay(String Filename) throws IOException
[Code] ....
First, in my constructor I have taken in an argument and used that argument to open up an output file. Meanwhile, I'm trying to work n the displayhead method to print out information and to read data to. I haven't opened up my input file yet, but I'm not understand how can I read a print data to an output file. in
public void displayHead() {FileWriter file=new FileWriter(Filename)}
do I make create another instance of the filewriter class to output data?
In simple words, suppose to I want to display some messages on my output file in the displayhead function. Since I already have opened up the file in the constructor, how do I combine that in this method...
I am developing a product where the client needs to display the content of XML in a JSP page. This XML will be extracted from database and will be temporarily sotred in a String object and will then be flushed to JSP page for display. This was working fine unitl now. But now the customer wants display each tag with one color. attribute in another color and data in another color.
For ex: <?xml version="1.0" encoding="UTF-8"?>
this should be displayed in one color. Then
<ichicsrmessageheader>Data</ichicsrmessageheader>
In the above one the tag should be displayed in one color and "Data" should be displayed in another color
In the above sample tag should be in one color and attribute should be in one color ex: red and value of the attribute should be in another color ex: blue and "Data" should be in one color ex: green.
Here is the sample screen shot of how xml should is currently being displayed.
I have a jsp with an img tag whose src is set to request a servlet to display a chart. This is called from another jsp form where user can select various filters. The first time the request is made all works great. but if the user changes the filter settings and and makes the servlet request a second time the chart stays the same. I have verified the new filter values are being set but the servlet is only being called on the initial request.at the head or called servlet I have(I also call a jquery empty on the div that holds the chart between requests. at the moment it just displays the former chart). It is like it is using cache:
