But, I coudln't find any place in Java/JSP where the value for status is being set. What could be the possible place where the values for status is being set.
As the code is client specific, so, I couldn't paste the specific code over here but I have searched in whole workspace i couldn't find a single place where values for status is being set/assigned to.
I am working on descending after I assign values. And everything is sorted, but one value. I don't know why always I get one value is not sorted.
public class SeunghunJunHw6 { public static void main(String[] args){ double[] randomArray = new double[9]; //assign random double values between 0 to 100 but exclude 100 for(int i = 0; i<randomArray.length;i++){ randomArray[i] = Math.random()*100;
I have a assignment to do some Lexigraphic ordering. I have figured how to get the majority of this done, however, when I input my string values. No output takes place? :s
import java.util.Scanner; public class Lab03c { public static void main(String[] args) { // TODO Auto-generated method stub Scanner lexi = new Scanner (System.in); String s1,s2;
I've a small question relating to type promotion I can't find an answer for on the web. Basically in your code if you have :
byte b = 0; b = b + 1;
The compiler will complain about the result being an int which cannot be assigned to a byte. That I understand, as b on the right hand side of the expression is promoted to an int and the result of the addition is an int. However the following does compile :
byte b = 0; b++;
Does the post increment not carry out the post increment as "give me the value of b and then add 1 to b" where I would have expected 'add 1 to b' to do the same integer promotion as the previous example ? The compiler will also allow the following
The first is MyArray Class (You can either use an array or an arrayList)Create a class called LastNameFirstNameMyArray according to the UML diagram. This class will allow a user to enter 5 integer values into an array(or object of ArrayList<Integer>). It contains methods to find min and max values and calculate the mean for the data set.
LastNameFirstNameMyArray - data[ ] : int (or data : ArrayList<Integer> ) - min : int - max: int - mean : double + LastNameFirstNameMyArray() + findMin() : void + findMax() : void + calculateMean(): void + toString() : String
Attributes: data[]the array which will contain the values or data<Integer>the arraylist which will contain the values minthe minimum value among the values in the arraylist maxthe maximum value among the values in the arraylist mean the arithmetic average of the values
Methods: You need to implement the constructor LastNameFirstNameMyArray(), which populates 5 values. In addition, the constructor should call findMin() and findMax(), and also calculateMean().
Methods: LastNameFirstNameMyArray()the constructor. It will allocate memory for the array (or arraylist) of size 5. Use a for loop to repeatedly display a prompt for the user which should indicate that user should enter value 1, value 2, etc. Note: The computer starts counting with 0, but people start counting with 1, and your prompt should account for this. For example, when the user enters value 1, it will be stored in indexed variable 0. The constructor should populate 5 integer values, call findMin() and findMax(), and also calculateMean().
findMin()this is a method that uses a for loop to access each data value in the array (or arraylist) and finds the minimum value. The minimum value is stored into min.
findMax()this is a method that uses a for loop to access each data value in the array (or arraylist) and finds the maximum value. The maximum value is stored into max.
calculateMean()this is a method that uses a for loop to access each data value in array (or arraylist) and add it to a running total. The total divided by the number of values (use the length of the array), and the result is stored into mean. toString()returns a String containing data, min, max, and the mean.
Task #2 TestMyArray
1. Create a LastNameFirstNameTestMyArray class. This class only contains the main method. The main method should declare and instantiate a LastNameFirstNameMyArray object. 2. Compile, debug, and run the program. Then, it should print out the contents, the min, max, and mean of the data.
and the second is A theater seating chart is implemented as two-dimensional array of ticket prices, like this:
Write a program that prompts the users to pick either a seat or price. Mark sold seats by changing the price the 0. When a user specifies a seat, make sure it is available. When a user specifies a price, find any seat with that price.
Note: Assume that if the user enters 1 for the row and 1 for the seat, the yellow marked sit will be sold.
I have a set of enum values (let's call then ONE, TWO, THREE.....). I want to find the larger of two of them. But max(ONE,THREE) gives a compile error as MAX isn't defined for type-safe enums. Fair enough.
I also agree that one shouldn't be able to use arithmetic functions on enums.
But as Enum implements Comparable, one can write a function which implements max and min, rather inefficiently I assume.
Is there a better way of getting the max/min of an enum? And if not, can the Java team be persuaded to implement it?
a simple Java program for finding the median value in a list of values with the following requirements:
- Create an array with an even number of values in it (an odd number of values is little bit trickier, so if you want a challenge, do it for either an even or odd number of values)
- Find the value with an equal number of values greater than the value as there are values less than the value
- Your solution must not require a sorted list of values - Output the median value
This assignment is intended to get you to demonstrate basic knowledge of arrays, and to create methods with both input and output.
Prompt user to enter a social security number in the format DDD-DD-DDDD, where D is a digit. Displays "Valid SSN" for a correct ssn, and "Invalid SSN" otherwise.I have it working I am just looking for other ways to solve this with an array maybe or something simpler. I have used if statements here:
public static boolean checkSSN(String social) { boolean valid = false; // 9 digits and 2 hyphens. First three characters, 5 and 6, and 8, 9, // 10, 11 are digits
From this, I need to extract the statements of variables that do not start with _G . I mean, I need to extract, Y in 1..15 , __X in 1..15 /17/20 but not _G7145 in 10..15 / 16.
I am using regular Expression for this as [^_G]^[A-Za-z0-9_]+ in|ins [-9 -9]..[-9-9] [/[-9-9]..[-9-9]]+
I am reading a book on Java and we are at a point where it is explaining type conversion in expressions. One of the examples shared has a byte being multiplied by itself and then assigned back to itself ...
byte b; b = 10; b = (byte) (b * b);
this is all good and dandy (that is, the code functions properly).
However, I am confused why I need to typecast here! Without the cast, the compiler screams, "Type mismatch: cannot convert from int to byte." Yet I haven't converted to an int?? It appears there was an implicit conversion.
The final value, 100, is clearly within byte's range of -127 to +127 isn't it? So I am lost as to what is the issue here.
I am given the task to create a program that evaluates infix expressions using two generic stacks, one operator stack and one value stack.
This is my GenStack.java file:
import java.util.*; public class GenStack<T>{//T is the type parameter private Node top;//top of stack public class Node {//defines each node of stack T value; Node next;
[Code] ....
I'm having trouble with the eval and apply methods. The eval method doesn't appear to pickup ')' characters, like it doesn't even see them.
Assuming that x, y, and z are integer variables, which of the following three logical expressions are equivalent to each other, that is, have equal values for all possible values of x, y, and z?
(x == y && x != z) || (x != y && x == z) (x == y || x == z) && (x != y || x != z) (x == y) != (x == z)
None of the three
A. I and II only B. II and III only C. I and III only D. I, II, and III
I selected B, but got it wrong. I really think I need understanding boolean logic. The correct answer says something else but I don't get the logic. Here is the correct answer:
Answer Key : The following model answer has been provided to you by the grader. Carefully compare your answer with the one provided here.
Expression III is the key to the answer: all three expressions state the fact that exactly one out of two equalities, x == y or x == z, is true. Expression I states that either the first and not the second or the second and not the first is true. Expression II states that one of the two is true and one of the two is false. Expression III simply states that they have different values. All three boil down to the same thing. The answer is E.
In exercise 4, I get the same problem:
The expression !((x <= y) && (y > 5)) is equivalent to which of the following?
A. (x <= y) && (y > 5) B. (x <= y) || (y > 5) C. (x >= y) || (y < 5) D. (x > y) || (y <= 5) E. (x > y) && (y <= 5)
Exercise 4 ABCDE Incorrect Score: 0 / 1 Submitted: 2/10/2014 8:21pm Your answer is incorrect. Answer Key
The following model answer has been provided to you by the grader. Carefully compare your answer with the one provided here. The given expression is pretty long, so if you try to plug in specific numbers you may lose a lot of time. Use De Morgan's Laws instead:
!((x <= y) && (y > 5)) !(x <= y) || !(y > 5)
When ! is distributed, && changes into ||, and vice-versa
In my jsp page , functionality is their to change the status of the employee, so i want that if i click on activate it should change the link to the deactivate and when i click on deactivate it should change to activate. How can i do that?
I want to do a simple search and replace regular expression of lines. I am very unfamilar with Java regular expressions, and I'm not sure how to do something as simple as what I want to do. I have lines that look like this...
The reason I want to use regular expressions is because I want to use the replaceAll method of the java.lang.String object. If I use replace I have to convert my strings into char arrays, and my code becomes bulky.
below is my code and this exception was thrown in another page so I created a new page and only imported just a single package still its throwing an exception? Any reasons why?
Reading a sequential flat file (which is working) but now I need to add code to update the status flag (setting it to ‘Y’ position(7,1)) before I close the file and not sure how without defining the fields.