JSP :: Show Group Header Above Each Displayed Table?
Aug 21, 2014
Displaying the records in a table. I am looking for a group header to be placed above each printed table for its related category and subcategory, as well as, the no. of the records for each table to be shown at the top of the table.
The table contains columns for category, subcategory, name. ex:
Category Subcategory Name
CON Retail AAA
CON Wholesale BBB
SPEC Retail CCC
What I am looking for is the below layout:
Category/Subcategory (No. of records) –similar to a group header
Name – Country ..etc ----Table header
table records
Here is my code below:
<%
//Retrieve the values from the DB
while (rs.next()) {
category_name1=rs.getString("category_name");
subcategory_name1=rs.getString("subcategory_name");
[code]....
The problem in the above code is that it is showing the group headers category & sub category multiple times and the count is incorrect.
package TheWorldCup; import java.util.ArrayList; import java.util.*; public class WorldCup2014{ public static void main(String args[]){ ArrayList<String> WorldCupTeams = new ArrayList<>();
[Code] ....
What it is doing is printing the team name and all eight groups and showing the group is: team name under. I want it to print out the team name, put it into a group and print out the group. Once 4 teams in a group, close that group off, do this until all groups are filled. How can I do this?
I'm trying to create a table where the Header is a custom object.
The custom object would be something along the lines of
public MyColumnObject { String myLabel; ArrayList dataForDropdowns; int defaultColumnIndex; int modifiedColumnIndex; String tooltip; }
This is simpler then what I want to do, but it's the basic concept. I want the column header to render the myLabel for the visual (at least at first). I want this render to be applied to however many columns I have, which will differ from table to table, but I always want the column header of each column to be of type myColumnObject.
I thought somethinglike this would work, but I'm getting java.lang.ClassCastException: java.lang.String cannot be cast to myColumnObject which makes sense, but I thought that I would be getting back my object.
p.s. I re-labeled all my code from my actual project, so if something looks off, it was probably just the re labeling.
public NewTestTable(MyColumnObjects[] fields) { setModel(new TestObjectTableModel( new Object [][] { }, fields ) { private static final long serialVersionUID = 1L; public boolean isCellEditable(int rowIndex, int columnIndex) {
I have a lot of records in excel around 2000 rows and it can be more so what I am looking for is that I need to show this records in the web for front end user. I want to feel the user that it is the same as excel but web based so he can filter rows , highlight rows or columns and export whatever filtered by him . I have one sample photo for that program ( called IPCS ) , I am using it now but I need to make same like that in JSP or anything using java I can do it.
Well, I have a list inside of a java class then i want to call that list into the jsp to show the results. That list has results from a query, everything is ok in java class because it shows me just one result in jsp, i read that it can be do with a for or enhanced for but been honest i have try everything and nothing work.
class A { List<StringBuilder> list; public void output(List<StringBuilder> objectToOutput){ try(BufferedWriter bw = new BufferedWriter(new FileWriter("temp.txt"))){ for(StringBuilder row:objectToOutput) bw.write(row.toString()); }catch(IOException e){}
[code]....
Why don't the a's show up on the console? I put them in as part of the debugging process and now I don't understand why they don't show up in both places.
import java.util.Scanner; public class AvgLrgSml{ public static void main(String[]args){ System.out.print("Hello there. Please enter any three numbers."); Scanner keyboard = new Scanner(System.in); double num1 = keyboard.nextDouble(); double num2 = keyboard.nextDouble();
How do you make it so that you can select 2 buttons in a radio button group? for example: If I have 7 radio buttons, and I want to be able to select 2 of the 7 instead of 1.
I am making a tile based top-down 2D RPG and am using Box2D for the physics. Since my game is tile-based, there are many tiles on each map that cannot be moved through. This results in many small individual Box2D bodies. This is obviously very inefficient and makes the game lag. Therefore I figured that combining the individual tiles' bodies into larger complex groups would be better.
The way I thought of doing it is to, first, group together tiles into groups of tiles that all share 2 vertices with at least one other tile in the group. Then, for each group I do the following. First I get all of the uncommon vertices (these should be the ones on the outside of the polygon). Then I connect all of those vertices and then remove all of the overlapping lines. This should result in only lines on the outside of the polygon. Then I sort the lines so that the first line in the sorted array shares its end point with the second line's start point, etc. Then I remove the doubled vertices and using those remaining vertices (I called them the "true vertices") I create the polygon. I know that Box2D only supports convex polygons, but with Box2DSeparator I should be able to do this, but I first want this method to actually work.
/** * Attempts to combine the given blocks into larger bodies to improve performance. * @param bs The created wall blocks. * @param w The world. Used for body creation. */ private void makeLargeBodies(Block[][] bs, World w) { Array<Tile> tiles = new Array<Tile>(); for(int i = 0; i < bs.length; i++) {
[Code] .....
However, this is where the first problem arises. This method is extremely slow for large maps (like 200x200 tiles). I have worked at this for very long and right now my head can't figure out how to make the loop more efficient...
Now for the next part. After that I attempt to create the bodies for the TileGroups:
//create all the groups' bodies size = groups.size; System.out.println(size + " groups"); for(int i = 0; i < size; i++) { TileGroup g = groups.get(i); System.out.println("Starting group " + i + "."); long timeCheck = TimeUtils.millis(); g.createBody(w); System.out.println("Group 0 took " + (TimeUtils.millis() - timeCheck) + " millis"); }
*Note that the printing is for debugging purposes*...
This method is probably not a problem; it is what is inside createBody(World) that is the issue...
public void createBody(World w) { Array<Vector2> allVertices = new Array<Vector2>(); Array<Vector2> uncommonVertices = new Array<Vector2>(); System.out.print("Starting search for uncommon vertices. "); long timeCheck = TimeUtils.millis();
[Code] .....
Most of the code is self-explanatory (with comments). My current issue is where I connect the uncommon vertices (see the printed statements). This method does not actually finish (I have let it run for several minutes and it does not complete). This is likely due to a large number of vertices (often around 3000 in a 60x60 map), but I cannot figure out how to make the loop more efficient... Because of this early failure I don't know if the rest of the method works, both physically and in theory.
All relevant classes (Tile, TileGroup, Line) are below:
private class Tile { private Vector2[] vertices; private TileGroup group; public Tile(int x, int y) { vertices = new Vector2[4];
I am making an expert system using Jess about animals. I wanted to make an interface using Swing and so I did. I have a problem using group layouts. The application works fine but at the end a exceptions is thrown:
Exception in thread "AWT-EventQueue-0" java.lang.IllegalStateException: javax.swing.JLabel[,0,0,0x0,invalid,alignmentX=0.0, alignmentY=0.0,border=,flags=8388608,maximumSize=,minimumSize=, preferredSize=,defaultIcon=,disabledIcon=,horizontalAlignment=LEADING, horizontalTextPosition=TRAILING,iconTextGap=4,labelFor=, text=The animal is a cheetah.,verticalAlignment=CENTER, verticalTextPosition=CENTER] is not attached to a horizontal group
[Code] ....
The application ask the user some questions about the animal. When the expert system has enough information to know the animal it tells the name of the animal and shows a picture of it. The exception is thrown when the application has guessed the animal and shows the response.
I have to organize the rows from the lower to the higher number, the problem is, what I have only organizes the first 3 rows even If I insert 3,4,5...or 10 rows.
for (int i = arg[0].length - 1; i >= 0; i--) { for (int j = 0; j < i ; j++) { for (int k = 0; k < i ; k++) { if (arg[k][j] > arg[k][j + 1]) { int temp = arg[k][j];
I need to process one component drag to the table. I misunderstand, how I can see to which Cell fall the component. I tried to use Event and Mouse event handlers in my custom Cell, but they do not work. I can copy the drag event to the table and table handles it, but how to get needed Cell I cant understand.
This is my codes in a button that if I click it . that information will send to Jtable but the problem is the jtable is in another frame so how can i connect this ?
DefaultTableModel model = (DefaultTableModel) new admin().tableBagtags.getModel(); if (txtName.getText().equals("")) { JOptionPane.showMessageDialog(null, "Please fill out all fields.", "Error!", JOptionPane.ERROR_MESSAGE);
I am making a game in java and for the game board i want to fill the screen with blocks. to do this i stored objects of a class that displays squares into an array list and displayed the array list. however, when i do this all of the squares are drawn on top of anther at the final squares coordinates and i dont know why.
here is the code
// code for adding the squares into the array nt x = 0; int y = 0; int size = 10; static ArrayList<Map> map = new ArrayList<Map>(); //static ArrayList<Items> items = new ArrayList<Items>();
I am writing this program for my Java level 1 class. I am able to get it to compile and run, however nothing is outputted. Below are the instructions and the code that I have written.
Instructions:
Write an application that calculates and displays the amount of money a user would have if his or her money could be invested at 5 percent interest for one year. Create a method that prompts the user for the starting value of the investment and returns it to the calling program. Call a separate method to do the calculation, and return the result to be displayed.
Below is the code that I have written
import java.util.Scanner; public class Interest { //main method public static void main(String[] args) { originalAmount(); Scanner input = new Scanner(System.in);
How do i make the 'date' column show only the date and 'timeIn' and 'timeOut' column only show the time. In my database table my 'date' column is a date type and 'timeIn' and 'timeOut' column is time.
I am reading from a database(SQL Server 2012) and storing that information in a ResultSet. I am then trying to display that information using a DataTable.
Here is my managed bean
/* * To change this license header, choose License Headers in Project Properties. * To change this template file, choose Tools | Templates * and open the template in the editor. */ package clientspage; import java.io.Serializable;
[Code].....
The ID and the commandLinks are being displayed but the Client is not.
I have a empty JList in which I hit a button LOAD DATA which should load all the data. but once I load data i try to fill in the List but I keep getting errors.
String[] aos = new String[itrList.size()]; itrList.toArray(aos); //JList listFAIL = new JList(aos); //list = new JList(itrList.toArray()); //list.removeAll(); list.setListData(aos); JScrollPane s = new JScrollPane(list);
try { ByteArrayInputStream in = new ByteArrayInputStream( transferWorker.bOutput .toByteArray()); BufferedImage bufferedImage = ImageIO .read(in);
[Code] ....
But nothing is happening in the GUI. I have stepped through and bufferedimage contains the data, but its not being displayed. Whats happening is, an image is being transmitted to serial port of laptop, so i'm taking it in and storing it in a BufferOutputStream and then trying to open it in my GUI class.
import java.util.*; public class TrafficIncidents { public static void main(String[] args) { Scanner s = new Scanner (System.in); // Array for days String [][] days = {{"Sat"},
[Code] ....
This is my output:
Day AM PM -------------------------------- Sat Sun Mon Tues Wed Thurs Fri 5 1 1 2 4 1 0
Basically I want to align the AM traffic incidents under the heading "AM" but am not sure how to accomplish this. I am using separate arrays for all three of these types of information and need the info to line up with their respective titles.
