I defined a java class thus:
class Info{
public String name;
public String version;
public String arch;
double CPUSpeed;
double ranUtil, CPUUtil;
};
But each object of such a class takes many bytes. How can I limit it to one fourth of a Kilo-Byte?
The String class stores the characters of the string internally as a private char[] and calling someString.length() results in getting the length field from the character array. I am looking to get the details on how the length is implemented. I understand it is a field, but in the original question I provide sample code and really want to know if/how the resulting byte code may differ when compiled, perhaps I am just not seeing the simple answer through my confusion.
Link ....
I am trying to split a string based on length(example length 5) of the string. But I am having a issues with this substring(start, end) method. I get all substring which are of length 5. But if the last substring is less than 5 then I am not getting that last substring. But I need the last substring even if it is less than 5.
String s = "fjdjfdfjgffgjhfjghfjkhjhjh";
String spLine;
for(int i=0; i<s.length(); i=i+5){
spLine = s.substring(i, (5+i));
}
>
I am looking for a way to create a method with the initial state in while loop, which will count the length of each word in a string using I want the output to be something along the lines of:
hello world how are you
There are 0 words of length 0
There are 0 words of length 1
There are 0 words of length 2
There are 3 words of length 3
There are 0 words of length 4
There are 2 words of length 5
This is my code so far it sort of does the job but not the way i want it too
import java.util.Scanner;
import java.util.StringTokenizer;
public class Brown_Matthew_13117002{
public static int count(String s, int len){
int result=0;
StringTokenizer st=new StringTokenizer(s,"[ ,;]");
[Code] ....
The output would end up being :
hello
There are 0 words of length 0
world
There are 0 words of length 1
how
There are 0 words of length 2
are
There are 3 words of length 3
you
There are 0 words of length 4
The problem asks me to write an expression whose value is the number of characters in a specific string. Normally, it would be a simple task of using the String.length() method, but that is not allowed. In fact, no variable declaration is allowed (it's a MyProgrammingLab assignment, if any are familiar).
Simply put, if I have a String "This is a sample string." is it possible to find the length without assigning it to anything?
In other words, the code must be able to go into the parentheses of System.out.println( ); and correctly print the length of said string.
The answer, for those curious:
System.out.println("This is a sample string.".length());
I didn't know the .length() method could be called on a literal. Now if only I could find out how to close this thread...
I am looking for a way to create a method with the initial state in while loop, which will count the length of each word in a string using I want the output to be something along the lines of:
hello world how are you
There are 0 words of length 0
There are 0 words of length 1
There are 0 words of length 2
There are 3 words of length 3
There are 0 words of length 4
There are 2 words of length 5
ithis is my code so far it sort of does the job but not the way i want it too
import java.util.Scanner;
import java.util.StringTokenizer;
public class Brown_Matthew_13117002{
[Code].....
I am looking for a way to create a method with the initial state in while loop, which will count the length of each word in a string using I want the output to be something along the lines of:
hello world how are you
There are 0 words of length 0
There are 0 words of length 1
There are 0 words of length 2
There are 3 words of length 3
There are 0 words of length 4
There are 2 words of length 5
This is my code so far it sort of does the job but not the way i want it too
import java.util.Scanner;
import java.util.StringTokenizer;
public class Brown_Matthew_13117002{
public static int count(String s, int len){
int result=0;
StringTokenizer st=new StringTokenizer(s,"[ ,;]");
[Code] ....
The output would end up being
hello
There are 0 words of lenghth 0
world
There are 0 words of lenghth 1
how
There are 0 words of lenghth 2
are
There are 3 words of lenghth 3
you
There are 0 words of lenghth 4
I think I need to use string.split instead of stringtokenizer and the while loop is incorrect it needs to loop equal to the number of letters in the longest word. But how to do either of these ?
How can find any string length without using any library method??
View Replies View RelatedI was asigned to make a code that would limit the input to 1 character when asked for the initial of your middle name. So far I have the code ask for your first name then your last name and out put "Hello" firstname+last name. Im trying to add an 1 character middle itnitial in there.
View Replies View RelatedI would like to limit my bandwidth usage when accessing/downloading files (similar to the --limit-rate 50K option for curl and wget) as the website has limited bandwidth. I am not exactly sure how to implement this, but I'm guessing it be accomplished via the BufferedReader? I have attached the current code below.
import java.io.OutputStream;
import java.io.BufferedReader;
import java.io.InputStreamReader;
[Code]....
There are two versions
1. The words remain in their places but the letters are reversed. Eg I love you becomes Ievol uoy
2. The words are also reversed. Eg I love you becomes uoy evol IWrite a program that use the java String class methods.
how you can do array.length, I have an array with [][][][], and what do I do to find the length of one section?
So let's say
Java Code: int array[][] = {
{5, 5, 5, 5},
{4, 4, 4, 4},
{3, 3, 3, 3}
} mh_sh_highlight_all('java');
How do I find out the length of the {5, 5, 5, 5} which is 4. Because there are 4 place-holders.Is there a way?
I am trying to declare fields as protected String custom.field.1096; in my java class but it does not allow me. Can I not declare the field as above? Is there any workaround to achieve this?
View Replies View RelatedI have created an application using hibernate and struts.In which a form is created where the user will enter all its personal details(for e.g name ,phone no. and address).
Here for address I have used textarea and whenever user enters the address, sometimes it can be a long string also.
So the problem is if a long string is entered then while displaying that ,address comes on single line and the page is stretched.
how to break this single string into mutiple lines in java class?
The area of a square is stored in a double variable named area . Write an expression whose value is length of the diagonal of the square. Do I use math.sqrt?
View Replies View Relatedi am trying to write a class method which will take in a string and returns a string which is the reversed version of that string. it compiles fine but when i try to run it it states Main method not found in class StringReverse,please define the main method as public static void main(String[]args). I am new to java and cannot figure out
import javax.swing.JOptionPane;
public class StringReverse {
public String reverseString(String str){
JOptionPane.showInputDialog(null,"Please enter word");
char c = str.charAt(str.length()-1);
if(str.length() == 1) return Character.toString(c);
return c + reverseString(str.substring(0,str.length()-1));}}
I want to write an app that declares a class Person(String name, int age), and an Account class, Account(int code, double balance).But, additionally, every Person has at most 3 accounts, and each account has a Peron associated with it.
my code so far...
public class Person {
private String name;
private int age;
private Account[] accounts;
private int numOfAccounts;
public Person(String name,int age){
this.name=name;
[code]....
My problem is:When I make data input for a person, and additionally I want to read data for the account(s) that this rerson has, what code should I write to create a new Account object as account[numOfAccounts].And, what is the code to assign an owner to a new created Account object?
There exists a relationship between the two classes, but I cannot find the way to implement this relation....
Does child class gets a copy of the methods and variables of parent class?
public class test1 {
public static void main(String a[]) {
Child c = new Child();
c.print();
[Code] ....
why is the output 1?
i want to write a class in such a way that i should get the current execution time of another class which is running. I searched in net but it shows only how to calculate the time duration of the current class which is running. But as per my way, i need the execution time of one class from another class. How to do this ?
View Replies View RelatedI would like to understand why only String class is immutable.
1. Why String class is immutable? What is the main reason for making String class as immutable.
2. Why there is no int pool or float pool or Integer pool etc, why only String pool.
I am a beginner at Java programming. how to implement my own String class, but I have to provide my own implementation for the following methods:
public MyString1(char[ ] chars)
public char charAt(int index)
public int length( )
ublic MyString1 substring(int begin, int end)
public MyString1 toLowerCase( )
[code]....
I have looked through the API, but I don't really understand where to start.
this is my code :
String name = "Mohan";
String is a immutable class and where these character stored when we assign some character. How the logics are working inside the String class.
why my sub class object just gives me a blank when it comes to the String. It works just fine for the super class but when I get to the sub class the program just gives me a blank. I won't let me input anything for the String. On line 24 of the client I attempt to input a new String but it doesn't ever let me enter one so then any call to getName is just a blank.
I have altered my super and sub class as well as the client to try to get it to work. I tried a local variable in the client, I tried using protected in the super class, I tried a handful of other things.
import java.util.*;
public class TryingItOutClient {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
[code]....
What does the line Console[] conList mean? How am I going to access the string values in class consolelist?
class ConsoleInfo
{
private String conTitle;
private double conPrice;
private int conQty;
private String conPic;
[Code] .....
I have a little a problem with String object in this class ....
public class Personne {
private String nom;
private String prenom;
private int age;
public Personne(){
this(null, null, 0);
[Code] ....
When i call the class personne with the Personne() i get these errors in compiling-time :
Exception in thread "main" java.lang.NullPointerException
at java.lang.String.<init>(Unknown Source)
at Personne.setNom(Personne.java:18)
at Personne.<init>(Personne.java:12)
at Personne.<init>(Personne.java:8)
at Main.main(Main.java:4) // The line wich i inisialize my object in my main method.
I am working on a calculator for Android.To make sure the application I am developing works with multiple operations (in the correct order) I decided to use ANTLR as part of my Java coding of the calculator. So in a separate file (.g4 file), I must declare the format of the expression.
E.G.
grammar Expr;
prog:(expr NEWLINE)* ;
expr:expr ('*'|'/') expr
|expr ('+'|'-') expr
|INT
|'(' expr ')'
;
NEWLINE : [
]+ ;
INT : [0-9]+ ;
After which I need to include the ANTLR class library in my Java Class. Then I believe I need to call a set of functions such as createLexerInterpreter and createParserInterpreter, but I am not sure. I will be having an algorithm string that will need to be parsed, such as " 3+4*5+8*9+(5/6) ".