I was almost finished with my program when I noticed I had a big logical error. At the very beginning of my else if statements I would jump down to my else statement.
Java Code:
import java.util.Scanner;
public class InternetServiceProviderNew
{
public static void main(String[] args) {
double packageA, packageB, packageC, extraA, extraB, userHours, aHours, bHours, cHours, userCharges;
packageA = 9.95; packageB = 13.95; packageC = 19.95; aHours = 10; bHours = 20;
String userPackage, A, B, C ;
Total IS those numbers. But question[10] will not cooperate with me and it's getting a bit aggravating as I can't find a logical reason for it to be doing that.how to perhaps lock the value of total and sTotal after 10 button clicks from any?
I am working in the field of validating data. I need to validate names and test scores and i keeping getting errors in my code. I keep tracing back all the errors and now I am stuck at a logic error. It is giving me a the validate sentence over and over even when i type stuff in. I have searched up how to do the .equals to a string but it doesn't give me a accurate enough to my problem.
import java.util.Scanner; public class P5A { public static void main (String args[]) { System.out.println( "Always Show" ); Scanner reader = new Scanner(System.in);
This is what i have so far, I use BlueJay to write this:
import javax.swing.JOptionPane; public class payroll { String again = y; // private String name; private double rate; private double hours; static double gross; //gross pay
[code]....
my first problem is that it expects a ")" on this line :"if ((hours <=40)rate *1);"For the assignment itself these are the requirements:
-Create a class called payroll with private variables for rate hours and name
-Create static variables for gross pay, union dues, health coverage (hp in my case), FICA taxes, State taxes, Federal taxes, net pay, all must be initialized to 0
-default constructor that assigns default values
a function called calcPay that will do the following tasks and print it to a pay stub :
- function that checks the hours ( if hours are 40 or less pay rate, if over 40 pay 150% of the rate) - calculates gross pay before any deductions (using user inputted hours and rate) - deduct medical coverage and union dues from gross pay and call this adjusted gross pay (also this should have its own line on the paystub) - A function that deducts State, federal and fica taxes from adjusted gross - FICA - 7% for any income -Federal - 2% for $0-$150 / 6% for 150.01 - 300 / 14% for 300.01 - 600 / 18% for 600.01 - unlimited -State - 1% for 0-150/ 3% 150.01 - 300 / 5% 300.01 - 600/ 8% 600.01 - unlimited - amount after all deductions is the net pay ( show this amount on its own line) - Start a loop that asks each time if there are more employees (y/n) y should continue the program and n should end it -dialog boxes should be created to recieve values for name, hours and rate - if the rate is entered below $8 dollars a new box should pop up and ask for a higher value - When there are no more employees, print out a summary of quantities stored in static variable (also had a problem with this) - End
So I think i completed most of these objectives but am having trouble with the syntax and some of the objectives
I cannot see why I am getting an 'Unreachable statement' error on 'return -1;' on line 13126.I am also getting a 'missing return statement' error on the very last line.
/* 12992: */ private int extractInterfaceValues(RSInterface class9, int j) /* 12993: */ { /* 12994:11712 */ if ((class9.valueIndexArray == null) || (j >= class9.valueIndexArray.length)) { /* 12995:11713 */ return -2; /* 12996: */ } /* 12997: */ try /* 12998: */ { /* 12999:11716 */ int[] ai = class9.valueIndexArray[j]; /* 13000:11717 */ int k = 0;
I'm getting errors on all the exceptions called EmptyCollectionException. I think this is because the import statement has a error on it but I'm not sure. I'm suppose to add methods for peek, isEmpty, size, and toString methods. I only started isEmpty also am wondering what I have to change from peek method if anything at all.
import jsjf.exceptions.*;//Error on jsjf import java.util.Arrays; public class ArrayStack<T> implements StackADT <T> { //Error on StackADT private final static int DEFAULT_CAPACITY = 100; private int top; private T[] stack;
My if else statement is not working...it keeps telling me that the else in the statement is a syntax error and that I should remove it. Whats wrong with it?
package Homework2; import java.util.Scanner; public class Homework2 { public static void main(String[] args) { // TODO Auto-generated method stub System.out.println("Welcome to the Triangle Program.");
This method accepts 1 integer, amount (the amount of money). Output the minimum number of in quarters, dimes, nickels and pennies used to make up the amount. For example, an amount of 32 would require 1 quarter, 1 nickel and 2 pennies.
This is the question^
My codes are:
public static int change (int amount) { int quarters = amount / 25 ; int firstresult = amount % 25 ; return quarters ; int nickel = firstresult / 5 ;
[Code] .....
The codes were working when i used System.out.println instead of return, but our teacher required us to use return (functions).
I am Having trouble with my program to validate. It is outputting null into the validation statement then it brings back a run-time error to that validation Statement for the String.
public String validateData () { if (nm == null)nm = "Error! Must enter at least one character"; else nm = name; return name; }//end validation method
Why is this happening, and then once that is completed, why is the validation Sentence in tests Scores not able to validate. I traced it back to out put "Error, a number between 1<100".
public void validateTests () { String testschange; if (test1 < 0 || test1 > 100) { testschange = " You have entered an invalid number, between 1-100. Please restart!"; testschange = Integer.toString( test1 ) ;
I have a problem about this numeric or value error on my java class. Whenever I am calling for the procedure in callable statement it says that error. I don't know what is the problem with my sql code because I;ve tried running it on database alone and it runs perfectly. The results that I need came out fine. But when I'm already calling it in java that error appears. But I tried on finding the line that the said error is coming from and here is the code...
create or replace PROCEDURE RENTING (P_NNAME IN VARCHAR2, P_ADD IN VARCHAR2, P_PHONE IN NUMBER,
I've created a truth table for logical operators. Now I'm supposed to alter the code so the table prints 1's and 0's instead of true or false. Here's a bit of the original code - just the header and the first line of the table.
System.out.println("p q AND OR XOR NOT"); System.out.println(); boolean p, q; p = true; q = true; System.out.print( p + " " + q + " " ); System.out.print( ( p & q) + " " + ( p | q) + " "); System.out.println(( p ^ q ) + " " + ( !p) );
All of my ideas involve using an if-then statement, but that would be all kinds of inefficient and unwieldy, I think.
The title says already where my difficulties are. I forgot to say, the "S" printing part works, but why the others doesn't. To make it more clear:
java Monoton 1 3 3 4 & java Monoton 1 3 4 1
=> nothing (my output)
I forgot to notice, with 1 3 3 4 as parameters it jumps out at if (b < c), which is expected. but it jumps out of the whole if instead just run the else part. that's the essence of my problem.
The Exercise:
=> The program should print the following letters;
S, if every number is true bigger than the before,
M, if every number is bigger or equal than the before,
N in the other cases
Examples (from the exercise)
=> java Monoton 0 1 2 4
S
=> java Monoton 1 3 3 4
M
=> java Monoton 1 3 4 1
N
The Exercise should done without the use of logical operators or other combined requirements.
Java Code:
public class Main { public static void main(String[] args) { int a = Integer.parseInt(args[0]); int b = Integer.parseInt(args[1]); int c = Integer.parseInt(args[2]); int d = Integer.parseInt(args[3]);
Assuming that x, y, and z are integer variables, which of the following three logical expressions are equivalent to each other, that is, have equal values for all possible values of x, y, and z?
(x == y && x != z) || (x != y && x == z) (x == y || x == z) && (x != y || x != z) (x == y) != (x == z)
None of the three
A. I and II only B. II and III only C. I and III only D. I, II, and III
I selected B, but got it wrong. I really think I need understanding boolean logic. The correct answer says something else but I don't get the logic. Here is the correct answer:
Answer Key : The following model answer has been provided to you by the grader. Carefully compare your answer with the one provided here.
Expression III is the key to the answer: all three expressions state the fact that exactly one out of two equalities, x == y or x == z, is true. Expression I states that either the first and not the second or the second and not the first is true. Expression II states that one of the two is true and one of the two is false. Expression III simply states that they have different values. All three boil down to the same thing. The answer is E.
In exercise 4, I get the same problem:
The expression !((x <= y) && (y > 5)) is equivalent to which of the following?
A. (x <= y) && (y > 5) B. (x <= y) || (y > 5) C. (x >= y) || (y < 5) D. (x > y) || (y <= 5) E. (x > y) && (y <= 5)
Exercise 4 ABCDE Incorrect Score: 0 / 1 Submitted: 2/10/2014 8:21pm Your answer is incorrect. Answer Key
The following model answer has been provided to you by the grader. Carefully compare your answer with the one provided here. The given expression is pretty long, so if you try to plug in specific numbers you may lose a lot of time. Use De Morgan's Laws instead:
!((x <= y) && (y > 5)) !(x <= y) || !(y > 5)
When ! is distributed, && changes into ||, and vice-versa
I am thinking of a project for my university the teachers liked it but I am not sure if its even possible.I am trying to make an andriod app. What I want to do is take a picture of a hand drawn logic circuit (having the AND, OR, NOT ... gates) recognize the gates, and make a circuit in the moblie and run it on all possible inputs.
For this I will have to make a simulator on mobile, that I dont think is the hard part. The problem is how could recognize the gates from a picture. Example of logical circuit is attached ( assume its hand drawn )..I found out that theres a edge detection plugin in java but still I dont think its enought to recognize the gates. Please share any algorithm or any technique or tools that I can use to make this thing.
So from what iv learnt in Java and programming in general is that using a case statement is far more efficient that using multiple IF statements. I have an multiple IF statements contained within a method of my program, and would like to instead use a case statement.
So I want to make a simple Java that ask the user to pick a powers and it has two options.If the user picks magic then execute the first if statement then ask the user again which type of magic the user wants.I can't make it work it keeps printing the else statement. Why is that?
import java.util.Scanner; public class Variable { static Scanner zcan = new Scanner(System.in); public static void main(String[] args)
I'm trying to run an if statement with an input condition and here is my code.
import java.util.Scanner; public class App10A { public static void main(String[] args) { Scanner fun = new Scanner(System.in); System.out.println("What's your name?"); String name = fun.nextLine();
[code]....
When the computer asked me "What's your name?", I typed in Victor, then the result turned out to be "Oops, try again!".I typed in Victor (without parenthesis) and "Victor" and both gave me the negative results.What exactly should I put in in order to get "This is the result I wanted!" ? how should I modify my code in order to get "This is the result I wanted!" when I put in Victor (without changing the equal sign)?
How do I use a variable in an if statement to return a public void method from another class? I've tried:
System.out.print("select 1 - 6: "); Scanner myScanner = new Scanner(System.in); myScanner.nextInt(); if (myScanner.nextInt()==1) { carSelection colour = new carSelection(); colour.carSelection();
The method colour in class car selection is just 4 print line statements? I've // out the if statement to see if it is correctly calling the method and displaying the data and it is?
I'm having a problem where an if statement isn't working. In the Person class boolean olderThan ignores my if statement so it always returns false and I just don't get why that's happening.
import java.util.Calendar; public class Person { private String name; private MyDate birthday; public Person(String name, int pp, int kk, int vv) { this.name = name;
In the program below I populated three arrays: student id, name, and GPA. The findStudent() method attempts to match users input with the input stored in the studentID array using an if/ else statement. When I use the if/ else statement the else always executes regardless if the IDs match? I am trying to get JOptionPane.showMessageDialog(null, "Incorrect entry"); to print only if the IDs don't match.
Java Code:
//FILE: StudentIDArray.java import javax.swing.*; //Used for the JOption dialog boxes import java.util.*; //Used for Scanner input public class StudentIDArray { boolean nameFound = true; final int numOfElements = 2; //Final int to control to loop for data
My program basically has 2 executeQuery statements. Based on the result of the first sql query the 2nd sql query gets executed (I intend to use if else ladder). The control executes the first query but never executes the second one.
I have this JAVA written but I can't get the parameters for the if statements right.
import java.util.Scanner; public class myFirstJAVA { public static void main(String[] args) { Scanner input = new Scanner(System.in); System.out.println("Please enter command: "); String text = input.nextLine();
