I want to work on a project in which I have a GUI where I can choose certain variables from drop down menus. I want to use these variables to modify a few configuration files. I have looked upon internet for a few methods which can be used for the same. However, I am not sure about the method I should use. The files I want to modify consist of 10 -15 lines.
View RepliesI have wrote the method delete turtle below. Which is part of turtle collection (Hashmap)
public void deleteTurtle(String name) {
Iterator iterate = turtles.keySet().iterator();
while(iterate.hasNext()) {
String key = (String)iterate.next();
if(key.equals(name)) {
iterate.remove();
} else {
setErrorMessage("notFound");
}
}
}
I need to now modify it so the method ensures that the turtles shape collection is cleared before the Turtle object is deleted.
What I want to happen is to add 2+ contacts by entering "a" from the menu. Then I want to enter "c" and have it display those contacts. But it doesn't seem to remember that I changed the arrayList masterList.
Java Code:
public class ContactListApp2 {
public static void main(String[] args) {
boolean quit = false;
while (quit == false) {
System.out.println("Main Menu:");
[Code] ....
With my code the menu runs. But when the user has typed in the name of a fruit (to reserve it) I'd like it to say 'Reserved' when the user then presses 'V' (to go and view all fruit)I have read Oracle Java Collections Arraylist and from my understanding I either have to code using the get method or equals method but I'm not too sure how to (I did try though)
import java.util.ArrayList;
import java.util.Scanner;
public class FruitApril {
public static void main(String[] args) {
[code]...
How to modify a specific line of a file in java. File name must be accepted from command line.
View Replies View RelatedI am using:
Java:..... 1.8.0_20JavaFX:... 8.0.20-b26
I have this class:
public class Person {
private SimpleStringProperty name;
public SimpleStringProperty nameProperty(){
if(this.name==null){
this.name=new SimpleStringProperty();
[Code] .....
I have this:
lista = FXCollections.<Person>observableArrayList();
lista.addAll(new Person("uno"),new Person("due"),new Person("tre"));
myListView.setItems(lista);
The problem is if I add /remove an item all is fine, the listView refreshes correctly:
Person p = new Person(tfld_textAdd.getText());
lista.add(0, p);
But if I change a value on an item into the observable list it doesn't:
lista.get(0).setName("new value");
I also have a table linked in the same way and the table workd correctly after I updated my Java version...
What step to know to develop software..
View Replies View RelatedIn a program I created, I'm using a text file that contains some texts needed for the program. The method relevant to this is something like the following.
private String wordgen(){
try {
BufferedReader reader = new BufferedReader(new FileReader("src/Resources/adjectives.txt"));
Random rand = new Random();
int low = rand.nextInt(400);
String fil="";
int i=0;
while(i!=low){
[Code]...
The program runs fine in netbeans project but once the jar is created it does not corporate with the text file. ("null" is returned) How can I attach text files to jar and exe?
so far this is what i have written. The program works correctly but I need to be able to have the numbers i am entering to show up on the .txt file.
import java.util.Scanner;
import java.io.*;
public class LargestAndSmallest {
public static void main(String[] args) throws IOException {
Scanner input = new Scanner(System.in);
[code].....
I have a LoginScreen class and one other class in my project. I want use user inputs (Username And Password) on other class if users details is true. I am stcuk at this point because when user attempt to Login connection is succesfully and other frame is coming to screen but i can reach user details anymore. Let me explain with codes;
LoginScreen class
/*
* To change this license header, choose License Headers in Project Properties.
* To change this template file, choose Tools | Templates
* and open the template in the editor.
*/
package deneme3;
import java.sql.Connection;
[code]....
You can see Button Action in MainProgramWindow " System.out.println( ??? );" How i can retrieve users inputs from this class ?
i am currently making a game in java and currently i am working on the basic mechanics. most of it is working fine but i cannot seem to make it so when the user presses and movment key and space to fire a bullet the bullet fires in the direction they are moving. here is the code i have for movement.
public void keyPressed(KeyEvent e) {
// TODO Auto-generated method stub
int bulletx = Player.x + 100;
int bullety = Player.y + 20;
int key = e.getKeyCode();
if( key == e.VK_W){
p.moveUp();
}
if(key == e.VK_S){
p.moveDown();
[code]....
I have made a simple form, it consists of 3 text box's textbox1, textbox2 and textbox3 as well as 1 button button1. What I want to be able to do is put numbers into textbox 1 and 2 and then show the multiplication of these numbers in textbox 3 when the button is pressed and I was wondering what is the standard way of reading these numbers from the text box and allowing us to do the conversion obviously in the textbox its a string and we need to convert to an int or double or whatever to be able to perform calculations on them then convert it back into a string to display in text box 3?
View Replies View RelatedThe thing my coding for sudoku is not working for few inputs... it works fine with all its value initially at 0, but when i place numbers more than 4 at random places it stops responding (it doesn't show any value). My assignment is to get a solved sudoku for these values:
//Sample Input:
{0,2,7,3,8,0,0,1,0},
{0,1,0,0,0,6,7,3,5},
{0,0,0,0,0,0,0,2,9},
{3,0,5,6,9,2,0,8,0},
{0,0,0,0,0,0,0,0,0},
{0,6,0,1,7,4,5,0,3},
{6,4,0,0,0,0,0,0,0},
{9,5,1,8,0,0,0,7,0},
{0,8,0,0,6,5,3,4,0}
My current code
public class Sudoku {
static int userGrid[][]=new int[][]
{{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0},
{0,0,0,0,0,0,0,0,0}};//[horizontal][vertical]
static int grid[][]=new int[9][9];//the grid that the program experiments on
[Code] .....
I'm writing a program that accepts three doubles from the user, and performs calculations on them. I want to be able to handle input mismatch exceptions on each individually (i.e., if the user enters a double for the first, then a letter for the second, I'd like to be able to keep the value entered for the first, and only require that the user try again with the second, then the third, etc.)... I tried putting each input instance into its own try/catch blocks, but it always goes back to #1 when an invalid input is entered. Right now, I have all three in one try/catch:
Java Code:
package com.itse2317;
import java.util.Scanner;
import java.util.InputMismatchException;
class Triangle
{
public static double side1 = 0.0, side2 = 0.0, side3 = 0.0;
[code]...
I wanted to create a simple window with the LWJGL and a key input request which closes the window.I also wanted to create the classes in seperated packages, so it's more organized.The window displays but if I press that certain key nothing happens.Here is the Main class:
package bb.main;
import bb.input.Input;
import bb.main.render.SimpleRenderer;
public class Main {
public static void main(String[] args){
SimpleRenderer createWindow = new SimpleRenderer();
Inputinput= new Input();
[code]....
I am trying to read the following input (which will be inputted by the user when run) using the BufferedReader approach:
1
*** * * * *** *** *** ***
* * * * * * * * *
* * * *** *** *** *** ***
* * * * * * * * *
*** * * *** *** *** ***
I am reading each line of the input one line at a time and incrementally storing four char positions into an array, so i am able to hold a vertical representation of each column. I.e. column 1 will be stored in array[0].
The problem with my code is that is does not read the last line of the input, it reads all the other inputs before it but just refuses to read the last line and execute the procedure of storing the characters.
Code:
public void defuseBomb(){
try {
BufferedReader reader = new BufferedReader(new InputStreamReader(
System.in));
String asciiLine = reader.readLine()+ " ";
int digit = (asciiLine.length())/4;
[Code] .....
We are writing our own classes and methods. My instructor has provide the code
/*-------------------------------------------------------------------------
import java.util.*;
public class Assignment5 {
public static void main (String[] args) {
[Code].....
I am having trouble with the question counter. I need the counter to increase when c, d or e are entered. I think I need to set up a if or while loop but I'm not sure how to setup the variables. This is what I have for the counter so far.
[public int getNumberOfQuestions(){
numQuestions = 0;
numQuestions ++;
return numQuestions;
}
I realized that I was not filling the array with anything but now I'm having issues filling it correctly. It's only filling the array with three of the user inputs ....
import java.util.Scanner;
public class DriverSort {
public static void main(String[] args) {
Scanner scan =new Scanner(System.in);
Sorter sorter = new Sorter();
int choice; // variable which says which sorting algorithm to use
[Code] .....
Which methods can be used to lock keyboard and mouse inputs using java??
View Replies View RelatedWhy when the user enters Y or N, this loop still continues looping instead of quitting?
System.out.println("Enter Y to indicate Up OR N to indicate Down " + "
");
String option = scanner.nextLine();
while (!response.equalsIgnoreCase("Y")||(!response.equalsIgnoreCase("N"))) {
System.out.println("Enter Y to indicate Up OR N to indicate Down " + "
");
option = scanner.nextLine();
}
I need to transformation the txt files into xml files, but each row txt files don't have same elements, for example the first book is composite one author
<books>
<book>Title</book>
<price>price</price>
<author>Author</author>
</books>
but the second book is composite two author
<books>
<book>Title</book>
<price>price</price>
<author>Author</author>
<author>Author2</author>
</books>
I would have the xml files with the number of authors variables, I can use JAXB for my problem?or not?
I need to generate a league table in Java based on results provided in the shape of user input. I have the 6 teams in an array. I need to ask the user how many wins, draws, losses each team has had.
for (String element : teams) {
System.out.println(
"Please enter the number of wins, draws and losses for " + element);
int[] wins = new int [6];
int[] draws = new int [6];
int[] losses = new int [6];
}
How do I pull 3 separate values from the user and then store each value in a separate element of each array? so if one team wins 3, draws 2 and loses 1 - I need to put 3 into the wins array, 2 into the draws array and 1 into the losses array? I then need to total all this in a table.
There is a problem that I am facing while using the Scanner class for taking inputs from the user. Suppose if I need to take an integer and a String input from the user, and I take the integer input first then the place where the user has to input the String skips and the variable shows a "" nothing on printing it. Suppose in this code snippet
import java.util.Scanner;
public class Test
{
public static void main(String[] args) {
Scanner sc = new Scanner(System.in);
System.out.println("Enter a number");
int n = sc.nextInt();
System.out.println("Enter a word");
String str = sc.nextLine();
System.out.println("Enter integer is " + n);
System.out.println("Entered statement is " + str);
}
}
The output is
Enter a number
13
Enter a word
Enter integer is 13
Entered statement is
I need to know why this happens and how should I avoid it. I've seen that taking the String input first solves the issue but while taking the input in a loop to populate a database the program only lets the user enter the first statement and the following statements are skipped.
I'm working on an assignment for my Java Programming class that requires me to work with Multiple Classes.
Overview of the assignment: Create a "Database" that allows a user to input information about a College Class.
My program has three Classes:
The information that must be tracked in the Course Class is:
- Section Number
- Instructor
- Classroom
- Students (an ArrayList of class Student)
The information that must be tracked in the Student Class is:
- Name
- Major
- GPA
- Hours
The Driver class will use the main method to print the user a prompt asking for inputs, then display all of the user's inputs after he/she wished to exit the program.
I'm having no trouble with asking the user for inputs and then checking the validations for the inputs, I'm currently struggling with return a String that houses all of the user's inputs for the variables above. The information must be returned in a method called toString(). Both the Student and Course Class must have a toString() method that returns the information in the class (value of the variables), I must then call upon these methods from the main method of the Driver Class to print them back to the user.
The toString methods within the Student & Course Classes are at the bottom of the code
To Summarize: What I need to do within the toString() methods to return the values the user has inputted for the various variables? Such as.. Should I pass something through the method? Do I need the this keyboard to pass through the variable again? I just fear that I'm currently misunderstanding a very critical part of programming.
My Driver Class
import java.util.Scanner;
public class Driver {
Course courseInputs = new Course();
Student studentInputs = new Student();
public static void main(String[] args) {
[Code] .....
import java.util.Scanner;
public class CountStringNumbers { // show the number of Strings that were numbers . . ..
public static void main(String []args){
int count = 0;
int countNumbers=0;
Scanner input=new Scanner(System.in);
[code]...
can count the numbers from 0-9 if the user puted but if it is 10 it doesnt count it , and i need to write all the numbers to have that option. . . . Is there an easy way that includes all the numbers? like if(word.equals(number)){<<<???? (numbers) i know htat doesnt work but is there anything similar ?? ??
countNumbers++;
}
System.out.println("Type Something , , , and to end the the termination type STOP");
word=input.nextLine();
count++;
}
System.out.println("You wrote "+count+" lines wich from those lines "+countNumbers+" were numbers and the programe terminated ");
}
}
I have an assignment where I'm supposed to write a program where the user inputs a month between 1-12 and then the right amount number in every month. I've tweaked the code a bunch of times, but I keep getting this error message:
insert "}" to complete StatementKALENDER_3.java
insert "}" to complete BlockKALENDER_3.java
The code:
import java.util.*;
import java.util.Scanner;
public class KALENDER_3
}
public static void main(String[] args){
Scanner scanner = new Scanner (System.in);
System.out.print("Skriv ett manadsnummer: ");
[code].....
I think I have just forgot to put in a few { } symbols, maybe an open loop?