I wrote java program to print fibonacci series till user wants it! But I'm getting this compilation error -
fibo.java:Incompatible types
found:java,lang.String
required:int
n=s.readline();
import java.awt.*;
import java.io.*;
import java.util.*;
class fibo {
public static void main(String args[])throws IOException {
int arr[]=new int[100];
[Code] ......
My code:
public class Fibonacci {
/**
* @param args
*/
public static void main(String[] args) {
int f[]=new int[100];
for(int j=0; j<100;j++){
f[j]=j;
[Code] ....
How can I improve my code?
How to print 10 numbers in Fibonacci serious aftet given number?
Like 13 21 34...
Program to generate Fibonacci series program using java multithreading.
View Replies View RelatedI'm trying to change the code on a Fibonacci series program that would allow me to exit the loop early if I exceed a specified number. The user enters any 2 random numbers (which will be the 1st 2 no.'s of the Fibonacci sequence printed to screen) and then continues up to a 'limit' on the number of numbers set in code. Here's the code:
int[] array = new int[limit]; //Define an array whose length is set by an int value for limit!!
array[0] = x; //User supplies a int value for x which takes the 1st position in the array!!
array[1] = y; //...and an int value for y in the 2nd position!!
for (int i = 2; i < limit; i++) //Start from the 3rd position of the array when carrying out calculations!! {
array[i] = array[i-1] + array[i-2];
[Code] ....
To exit the code/ 'limit' early if the array prints a number higher than 100, I tried putting a 'while' condition before the last line, as follows:
while (array[i] < 100)
System.out.print(array[i] + " ");
Can I even use a 'while' loop within an array, or is there some other way I need to integrate it?
Part A: While Loop Program
Write a program that detects Fibonacci numbers. Prompt the user to input a positive integer. Upon input, the program will determine if the number is either a Fibonacci number or not. If a Fibonacci number, then the order of the number in the sequence must be output. If not a Fibonacci number, then the Fibonacci numbers above and below it (including their order in the sequence) must be output. Once it finishes, the program will prompt the user for a new number. The program will exit if the user enters a string (such as “quit”) instead of an integer. Use the sample output file, fib-seq-det.txt, to view a sample session
This is my project, I wrote a programs that tells you if the input number is a fibonacci number or not. For some reason it only works for some Fibonacci numbers but not all of them.
import java.util.Scanner;
public class While
{
public static void main(String[] args) {
System.out.println("Welcome to the Fibonacci Sequence Detector
");
Scanner in = new Scanner(System.in);
System.out.print("Please input a number for analysis: ");
int input = in.nextInt();
[Code] ....
I have to create a program that calculates the nth Fibonacci number and returns that to the user. Fibonacci said his number sequence would describe the ideal breeding patterns of immortal rabbits. So, you are going to make this vision a reality.
First, take in a numeric value from the user and calculate that value in the fibonacci series. Next, find an image of a rabbit and display the image on a GUI (put the image as an icon on a label!) the number of times returned by the algorithm (Put all the aforementioned labels on one panel with FlowLayout!).
You need to remove the old images from the Panel. Probably the easiest way to do this is to create a whole new panel and remove the old one (hint: the remove method of JPanel should come in handy)
You could use an array of JLabels
You will need to create a new JLabel and add each member of the array to the panel
I should be able to scroll to see any images that are off screen
I am having difficultly on to making the array list for JLabel, and getting the Fibonacci sequence to show the pictures of rabbits. Below is my current code.
import java.awt.FlowLayout;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Rabbit extends JFrame
[Code] ....
I set out to make a Tic-tac-toe (Cross and Noughts) game to test my learning so far. While things have gone pretty well so far, I am absolutely stumped by my current issue. When I compile and run the code, the Grid of buttons that I generate do not appear. However, if I mouse over the window, they seem to then get refreshed/repainted. I cannot for the life of me figure out why this is happening. From Googling the issue, it seems this is either an issue with the layout manager or related to a thread conflict with the GUI? [URL] ....
I'm listing out the code for the game class and the button class.
import java.awt.event.*;
import javax.swing.*;
import java.awt.*;
import java.util.*;
public class CrossNoughtsGame {
private JFrame frame;
private JPanel mainPanel;
private ArrayList<CNButton> buttonList = new ArrayList<CNButton>();
private boolean isX = true;
[Code] ....
I have been struggling with this program for weeks. This program is supposed to take a user's inputted odd number and then print out all prime numbers lower than that number.
public class PrimeNumber
{
Scanner scan = new Scanner(System.in);
int userNum;
String neg;
public void getUserNum()
[code]...
ok so im doing a treasure hunt thing game and the situation is this: i already made a 5 by 5 array of integers and i placed the "treasure" on the 4th row of 3rd column. The problem is this i am asked to print the cell where the user visits. it should look like this
* * * * *
* * * * *
* * * * *
* * * * *
* * * * *
and when the user inputs 12 it should look like this
1 represents the row and 2 represents the column
* 34 * * *
* * * * *
* * * * *
* * * * *
* * * * *
the 34 represents the clue on where should the user go.
my problem is i can print the * and i already made the array pool
int[][] array = new int [][] {
{21, 34, 42, 23, 14},
{12, 31, 55, 32, 24},
{15, 51, 53, 13, 41},
{25 ,22, 44, 33, 54},
{45, 35, 53, 43, 52}
};
but i cant replace the * with what cell it is representing
btw i printed the * like this
for (i = 1; i <=5; i++) {
for (j = 1; j <=5; j++) {
System.out.print("* ");
}
System.out.println ();
}
Now I am doing dictionary app using files..
Here i want to print the String from Starting character which is given by user..Here i given below the image like my concept..here we put .(dot and enter R)eclipse will print the method name which is starting from R..
I have to do a small program about parking. In the 2-d array (parking lot), contains different kinds of cars, the user have to :
1)enter which car he wanna move,
2)what direction (w,a,s,d) and after that,
3) how many moves( not out of bound) he wants to make, and finally
4) we print out the new parking lot for his next move
And i am stuck at how to move the car to corresponding position and then prompt user for the next move?
For example:
I want to move A to the right by 1 (d)
擷取.PNG
print result:
擷取1.PNG
How do I do that? The code that i have right now
public class CarParkGame {
public static void main( String [] args) {
String carPark[][] = new String [6][6] ;
carPark[0] = new String[] {"A","A","A","0","0","0"};
carPark[1] = new String[] {"b","0","0","0","0","c"};
carPark[2] = new String[] {"b","X","X","0","0","c","<exit>"};
[Code] .....
I want to write a program that accepts user input and then prints its average in a serial way.
Suppose i enter 5. I should get result 5 first time then i input 10 then it should return the average of (5 and 10) and then i enter say 20 it should return average of (5,10 and 20) and so on.
So I'm learning java from a website and I was tasked with creating a simple program which allows the user to enter a series of integers, then finally when they decide to input a non-integer the program will print the maximum and minimum values of the integers they entered. So for example if they entered 5, 4, 3 and 2 then enter a non-integer the program would output 5 (maximum value), then 2 on a new line (minimum value).
Here is my code:
import java.util.Scanner;
public class MaxMinPrinter {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
int max = Integer.MIN_VALUE;
int min = Integer.MAX_VALUE;
[Code] ....
And this is what the output looks like:
Actual output
-------------------------------------------
Enter an integer: 5
- 10
-
- Enter an integer: -4
- 8
- -6
-
- Enter an integer: 11
- -1
-
- Enter an integer: q
- -1
- -6
When it's supposed to look like this:
Expected output
-------------------------------------------
Enter an integer: 5
Enter an integer: 10
Enter an integer: -4
Enter an integer: 8
Enter an integer: -6
Enter an integer: 11
Enter an integer: -1
Enter an integer: q
11
-6
I've been googling information on how to print a pdf in java, and it seems that the java print api is used more for printing from a swing app. What I'm needing to do is send a pdf document to the printer upon user request. I would like my app to work as follows - User selects pdf to be printed- Program determines pages to be printed and deducts amount from user account- If sufficient money, program sends job to printer automatically without popping up the print screen.- If printed successfully, then program tells user it was printed. I'm able to figure out the rest of the pieces, in regards to user input and determining pages of the pdf, except I don't see how I will be able to print the pdf.
I've tried to use this code
PrintService defaultPrintService = PrintServiceLookup.lookupDefaultPrintService();
DocPrintJob printerJob = defaultPrintService.createPrintJob();
File pdfFile = new File("c://myPdf.pdf");
SimpleDoc simpleDoc = null;
try {
simpleDoc = new SimpleDoc(pdfFile.toURL(), DocFlavor.URL.AUTOSENSE, null);
[Code] ....
But all that I get is junk characters spread across 15 or so pages, for a pdf file that simply says "Hello World". I can open the pdf file on my computer, and print it ok, but when using the above code, it just prints out junk. How I might need to format or setup the pdf so that I can print it correctly. My program could be run on any number of Linux systems, with a multitude of printer types.
Write a Java program that asks the user to store 10 numbers in an array. You should then print the array in the order entered and then print in reverse order. However, instead of putting all the information in the main, you should use a class called PrintIt. The PrintIt class should have an instance variable that is an array to hold the numbers. You should have a method that will print the array in the order entered. You will also need a method to print in reverse oder. Then create a tester class that asks the user to enter 10 numbers and puts them in an array.
So far I've got this.
public class printIt {
int i;
int [] numArr = new int [10];
public printIt () {
i = -1;
[Code] .....
Output:
Enter a number:
8
34
Forward:
8
34
Reverse:
34
8
end
what i want as an number is being able to print out 10 numbers but this only lets me do two numbers. Why is that so?
I have an Array of objects that contains strings. I am new to Java and have read books, the Java docs, and searched the Internet for my problem to no avail. How can I get my strings to print in a list so that the user can select an object to manipulate its attributes? I have a class called Instruments and created 10 guitar objects. Here is the code:
Instrument [] guitar = new Instrument[10];
for (int i = 0; i < 10; i++) {
guitar[0] = new Instrument("Guitar 1");
guitar[1] = new Instrument("Guitar 2");
guitar[2] = new Instrument("Guitar 3");
guitar[3] = new Instrument("Guitar 4");
[Code] ....
I am having an issue with using FileWriter to print some text to a text file. In the following code, I am supposed to be able to print the initial attributes and the user changed inputs into a file but all I am getting is the memory locations of the objects I created in one long line.
package project3final;
import java.io.*;
import java.util.*;
public class Project3Final {
static class Instrument {
char [] stringNames = {'E', 'A', 'D', 'G', 'B', 'E'};
private final String instrumentName;
[Code] .....
I had to make a program that allowed the user to enter the number of students and the students names and grades and then print out the name with the grade in descending order. right now I only have it where it prints the names out in descending order. how do I get it the print out with the grade?
Here is my code
import java.util.*;
public class Grades {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.print("Enter the number of students: ");
int numofstudents = input.nextInt();
[Code] .....
I am attempting to make a heart rate calculator program. Here is a little overview of what I am trying to do. It must use a constructor and get and set methods. It must print heart rate ranges and the user's information(age).
// Use scanner to get inputs
import java.util.Scanner;
// Declare class
public class HeartRates {
private int Age;
private int DayOfBirth;
private int MonthOfBirth;
private int YearOfBirth;
private double MaxHeartRate;
private double MinTargetHeartRate;
[Code] ....
My program is user input 20 char and the program will print the most common. So I use another int arr which count the number appears in the original array. i know its not so Effective but I don't know why it run but it stop in the middle. I got this code :
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 20
at Ex2.common(Ex2.java:39)
at Ex2.main(Ex2.java:23)
import java.util.Scanner;
class Ex2 {
public static void main(String[] arg) {
Scanner reader = new Scanner (System.in);
char[] arr=new char[20];
System.out.println("Please enter 20 chars:");
for (int i=0;i<20;i++)
[Code] ....
I am new to Java and have read books, the Java docs, and searched the Internet for my problem to no avail. I have an Array of objects that contains strings. How can I get the object's strings to print in a list so that the user can select that object to manipulate its attributes? For example, the user can select "Guitar 1" from a list and manipulate its attributes like tuning it, playing it, etc. I have a class called Instruments and created 10 guitar objects.Here is the code:
Instrument [] guitar = new Instrument[10];
for (int i = 0; i < 10; i++) {
guitar[0] = new Instrument("Guitar 1");
guitar[1] = new Instrument("Guitar 2");
guitar[2] = new Instrument("Guitar 3");
guitar[3] = new Instrument("Guitar 4");
guitar[4] = new Instrument("Guitar 5");
guitar[5] = new Instrument("Guitar 6");
[code]...
New to programming. Am supposed to create a program that reads a text file (of integers) and computes a series of computations on these integers. I don't have the code for the integers in my code yet, (i know how to do those), but am struggling getting the array to simply print in the print writer. I have the user select a text file, read the file with a scanner, and then save the computations done from my code into another file. specifically, the problem is as follows: Write a program that uses a file chooser dialog to select a file containing some integers. The file contains an integer N followed by N integers. The program then uses a file chooser dialog to let the user specify the name and location of an output file to write results to.The data written to the output file will be as follows
(1) The original list of N numbers from the input file,
(2) The original list of N numbers printed in reverse order of how they appear
in the input file.
(3) The sum and average of these numbers,
(4) The minimum of all the numbers,
(5) The maximum of all the numbers.
[import java.io.File;
import java.io.IOException;
import java.io.PrintWriter;
import java.io.Writer;
[Code]....
1. creates a file.
2. ask user to write into that file
3. save the file
4. print content of file.
Is my current exercise, so far i have gotten the code to create a file. What should i use to ask user to write into that file and save?
package assignment7;
import java.io.*;
public class Exercise2
{
public static void main ( String [ ] args ) {
String filePath="newfile.txt";
File newFile = new File ( filePath ) ;
[Code] .....
1. creates a file.
2. ask user to write into that file
3. save the file
4. print content of file.
is my current exercise.so far i have gotten the code to create a file, and ask the user to input their age.what should i use to save what the user writes into the file?
Java Code:
package assignment7;
import java.io.*;
import java.util.*;
public class Exercise2
{
public static void main ( String [ ] args ) throws IOException
{
Scanner scan = new Scanner(System.in);
[code]....
Write a program that accepts the line number from the user and prints only that particular line from the Floyd triangle.
Example:
Input: 2
Output: 2 3
Input: 3
Output: 4 5 6