Program That Asks User For Integer And Prints Out All Its Factors In Increasing Order
Nov 18, 2014
Write a program that asks the user for an integer andthen prints out all its factors in increasing order. Use a class FactorGenerator with a constructor FactorGenerator(int numberToFactor) and methods nextFactor and hasMoreFactors. Supply a class FactorTester whose main methods reads a user input, constructs a FactorGenerator object and prints the factors.
Here is what I have so far for my main class and tester class
public class FactorGenerator
{
int factor;
int number;
int x;
FactorGenerator(int numberToFactor)
{
number = numberToFactor;
}
So I'm trying to write a program that prints out the "most-repeated integer" in an Array.
For example: if an array contains {1,2,2,3} It would print out 2 as the result.This is what I got so far and according to my knowledge I think I'm correct but for some reason it doesn't work.. Please give me some inputs.
public class MostInt{ public MostInt (){ int[] array = {0}; for(int i = 0;i>array.length;i++){ if(i==i++){ System.out.println(i);
I am trying to write a java program that asks the user for a list of names (one per line) until the user enters a blank line. At that point the program should print out the list of names entered, where each name is listed only once (i.e., uniquely) no matter how many times the user entered the name in the program. I am supposed to use an ArrayList for this problem.
My idea for a solution is to create an ArrayList<String>, read each name, i.e., line, entered and then to see if that name is already in the ArrayList. I created a for loop to check each element in the ArrayList but when I try to assign an element to a string variable I get the error "Type mismatch: cannot convert from Object to String". Not sure why that is happening because the ArrayList is defined as a String list.
Consider the sequence of digits from 1 through N (N<=9) in increasing order: 1 2 3 4 N
Insert either a +(for addition) or a - (for subtraction) between each of the digits so that the resultant sum is zero. Print all possible combinations that sum to zero.
Example: Enter a number: 7 1+2-3+4-5-6+7=0 1+2-3-4+5+6-7=0 1-2+3+4-5+6-7=0 1-2-3-4-5+6+7=0
lines 7, 8, &12 "primes" are underline in red (prime cannot be resolved) is what pops up when i hover over the x's.
i don't get why that is.
package assignment7; public class Exercise3 { public static void main(String[] args) { Prime.setSize(1000); for (int p = Primes.next(); p < 30; p = Primes.next())
Lines 7, 8, &12 "primes" are underline in red (prime cannot be resolved) is what pops up when i hover over the x's.
I don't get why that is.
Java Code :
public class Exercise3 { public static void main(String[] args) { Prime.setSize(1000); for (int p = Primes.next(); p < 30; p = Primes.next()) { int n = (int)Math.round(Math.pow(2,p)) - 1; System.out.printf("%d 2^%d-1%d", p, p, n); if (Primes.isPrime(n))
Write a program (TwoIntegers.java) that prompts the user to enter two positive integers and prints their sum (by addition), product (by multiplication), difference (by subtraction), quotient (by division), and remainder (by modulation). When the user enters 5 and 3, the output from your program should look exactly like the following:
Enter two positive integers: 5 3 The sum is 8. The product is 15. The difference is 2. The quotient is 1. The remainder is 2.
import java.util.Scanner; public class TwoIntegers { public static void main(String[] args) { System.out.println("Enter two positive integers: "); Scanner userInput = new Scanner("System.in"); int integer1 = userInput.nextInt(); int integer2 = userInput.nextInt();
We are writing our own classes and methods. My instructor has provide the code
/*------------------------------------------------------------------------- import java.util.*; public class Assignment5 { public static void main (String[] args) {
[Code].....
I am having trouble with the question counter. I need the counter to increase when c, d or e are entered. I think I need to set up a if or while loop but I'm not sure how to setup the variables. This is what I have for the counter so far.
package question.pkg3; import java.util.Scanner; public class Question3 { public static void main(String[] args) { // TODO code application logic here Scanner Luka=new Scanner(System.in); double sum=0;double count=0; int[] a=new int[10];
[code]....
I'm required to write a program that allows the user to enter up to 10 integer grades into an array. Stop the loop by typing in ‐1. Your main method should call an Average method that returns the average of the grades.I There's something wrong with my program , the count always stays 0 and the sum is always 1 less than the actual sum.Sample input and output :
Enter grade 1: 8 Enter grade 2: 9 Enter grade 3: 10 Enter grade 4: 5 Enter grade 5: 8 Enter grade 6: 9 Enter grade 7: -1 output
Average grade is 8.1666666667On line 13 I had count=count+1 ;
I'm just learning about arrays. I have a small program to write that asks to create 2 arrays. One holding 5 names of flowers. One holding the prices of those 5 flowers. I ask the user what kind of flower they want and the quantity. I then need to create a loop that locates the flower name and uses that index to find the cost of the flower. I am struggling on how to write in code how to use one array index to find another. Example: Roses and $.50.
Write a program that asks the user to enter five test scores. The program should display a letter grade for each score and the average test score. Write the following methods in the program:
calculateAverage This method should accept five test scores as arguments and return the average of the scores. determineGrade This method should accept a test score as an argument and return a letter grade for the score, based on the following grading scale
Score Letter Grade 90-100 A 80-89 B 70-79 C 60-69 D Below 60 F
System.out.println("Enter the first score"); test1 = keyboard.nextDouble(); System.out.println("Enter the second score"); test2 = keyboard.nextDouble();
1. Write an algorithm that asks the user for your birth date and the current date and displays how many days has passed since then (remember that April, June, September and November has 30 days, February has 29 on leap years, and the rest 31)
2. Write an algorithm that asks the user a number (save it as N) and displays the N term of the Fibonnacci series (take it as 1, 1, 2, 3, 5 ...)
Basically I need to make a program prompts the user for an integer, check to make sure the length entered by the user is a power of 2 and at least 2. Then I need to convert from base e to base 2 then I need to print the tick marks of a ruler based of the value of the length.
I got the whole converting thing working and the check for a power of 2, that wasn't an issue because it didn't require any recursion. I just don't know how to print out the proper tick mark values.
The way it is supposed to work is that it needs to look like this. Say the user enters 8;
012131210 012345678
Or if the user enters 16;
01213121412131210 01234567890123456
The bottom row is pretty much just the index value, that I print fine.
The top row though is supposed to be the length of the ticks on a ruler, with the middle most value being the value of the conversion from base e to base 2 from above. I can get that printed and what I get just looks like this.
For 8;
000030000 012345678
For 16;
00000000400000000 01234567890123456
As you can see I can get the middle value and the index values below but I don't know how to use recursion to get the right numbers.
Here's my current code.
import java.util.*; public class TickMarks { public static void main (String args[]){ Scanner input = new Scanner(System.in); boolean looping = true; while(looping == true){ System.out.print("Please enter a length: ");
[Code]...
Now the methods isPowerOfTwo() and printLength() both work fine. However, I'm not sure how to get the left and right side working.
My thoughts were to split the length in half and get a left and right side. I gave both of them arrays so I can keep track of the values. Now as you've seen above I get all zeros and I know it's because that's the default value in an array, I just don't know how to get the proper values.
When I run this code, it is supposed to get one value from turnTimer(); and return it, just as a test. This works when I enter a valid pit. For example. If I were to input "A" when it's player one's turn, it will return 1, like it should. However, if I were to type "H" when it's player one's turn, it returns "Not a valid pit!"(like it should) but then it also returns 12. It shouldn't know that H is 12 because it's in a separate method. I'm confused as to why it's printing both values.
import java.util.*; public class Mancala { static Scanner input = new Scanner(System.in); public static int pit; public static void main(String[]args) { Mancala mancala = new Mancala(); int[] board = {0,3,3,3,3,3,3,0,3,3,3,3,3,3};
When I run this code, it is supposed to get one value from turnTimer(); and return it, just as a test. This works when I enter a valid pit. For example. If I were to input "A" when it's player one's turn, it will return 1, like it should. However, if I were to type "H" when it's player one's turn, it returns "Not a valid pit!"(like it should) but then it also returns 12. It shouldn't know that H is 12 because it's in a separate method. I'm confused as to why it's printing both values.
import java.util.*; public class Mancala { static Scanner input = new Scanner(System.in); public static int pit; public static void main(String[]args) { Mancala mancala = new Mancala(); int[] board = {0,3,3,3,3,3,3,0,3,3,3,3,3,3};
I was told to create a program that prints the time between 00:00 (0:00 a.m.) and 23:45 (11:45 p.m.) in the 24-hour clock and 12-hour clock format like this:
import java.util.Scanner; public class smallestnumber { public static void main(String args[]) { Scanner input=new Scanner(System.in); int smallest =0; int number;
[Code]...
here is the output of my code:
Enter the number 88 Enter the number 8 Enter the number 6 Enter the number 55
I am trying to write a java program that prints out the number that is the mathematical constant e. As you input a number, the larger it gets , the closer it comes to 2.71828 . Here is my code:
//taylor series that prints out e^1=1+1/1!+1/2!+1/3!+..... import java.util.Scanner; public class taylor_1 { public static void main(String args[]) { Scanner input=new Scanner(System.in); int factorial =1;
I have to make a program that prompts the user to enter 10 numbers and at the end it prints out the distinct numbers and then the other numbers that weren't repeated...
I have the part where it prints out the distinct numbers but I stuck on how to make it print out the other numbers that didn't repeat...
import javax.swing.JOptionPane; public class DistinctNumbers { public static void main(String[] args) { String getInput; int input; int[] numbers = new int[10];
I'm new to Java. I have a problem with this code, wherein you have to count how many times you borrow in order to do subtraction.
For example: x = 312; y = 34;
The output should be: 2 because you have borrowed 2 times in subtraction.
My problem is like this, whenever I input x=12, y=2, the output is 1, also, when x = 12, y = 1. It should be 0.
Here's my code:
import java.util.Scanner; public class BorrowOut{ public static void main (String [] args){ Scanner in = new Scanner (System.in); int x; int y; int i = 0; int j = 0;
I am writing a program that grab user input number which represent beats per minute separated by commas. It then parses the numbers and reorders them from smallest to largest and then outputs the average, medium, maximum and minimum number all in separate lines. I am having trouble getting the array to sort the input from smallest to largest. It is currently only working for 3 numbers inputted. Anything more will not reorder it.
/* * To change this license header, choose License Headers in Project Properties. * To change this template file, choose Tools | Templates * and open the template in the editor. */
/* * To change this license header, choose License Headers in Project Properties. * To change this template file, choose Tools | Templates * and open the template in the editor. */
I am writing a program that is supposed to take 3 numbers inputted by the user and sorting them out in an ascending order. I believe my code is correct but can't figure out why the program isn't behaving as expected.
import java.util.*; //Required to use the scanner console public class Week3_Programming_Problem { static Scanner console = new Scanner(System.in); //Allows for user input
