Properties Of A Triangle - X And Y Coordinates
Oct 29, 2014
A triangle is defined by the x- and y- coordinates of its three corner points. Compute the following the following properties of a given triangle: the lengths of all sides, the angles at all corners, the perimeter and the area. The program must prompt a user for the point coordinates. I have created a class Triangle and a class TriangleSimulator, I am stuck and can't figure out why my program won't run correctly.
import java.util.Scanner;
public class Triangle {
Scanner in = new Scanner(System.in);
private int x1;
private int x2;
private int x3;
[Code] ....
View Replies
ADVERTISEMENT
May 24, 2014
I'm having a random x and y coordinate generate and I need to check if the coordinates are inside of a right triangle on this imaginary coordinate plane.
View Replies
View Related
Dec 28, 2014
I'm doing a problem where the area of a triangle is returned (if valid). However, I want to return a message (i.e. 'triangle is not valid) if the triangle is invalid.
I'm not sure how to go about to doing this as my method (called area) will only let me return doubles. Possible to return a string in an else within my area method?
public class MyTriangle {
public static void main(String[] args) {
//triangle is valid if the sum of any two sides is bigger than the third
System.out.println(isValid(3, 4, 5));
System.out.println(area(543, 4, 5));
[Code] ...
View Replies
View Related
Jul 4, 2014
I am planning a race simulator car and I have a problem to get the x and y coordinates from the graph (or circuit). I explain the problem better. If I for example, drawing an arc using the library DRAW2D how do I get all the points in x and y coordinates of that arc?
View Replies
View Related
May 8, 2014
I'm working on a project right now in JavaFX, and got stuck. I am drawing a path consisting of CubicCurveTo's and I wonder if there's any way to get the X and Y coordinates from certain parts of that path.
Imagine following a curve (path) with a pencil slowly, and every second you take note the X and Y coordinate. I mean I'm not interested in the control points or start and end points, but the points "in between", preferably at a certain interval.
I've searched for many things online, but have trouble knowing exactly which words to search for. "Paths" often bring up file paths, traversing, coordinates etc. all fail to give me any good results.
I tried to be as specific I could, and I don't think my current code is of any interest in this matter.
(The point of it all is that the path should simulate the path a person walks, and I will store the coordinates in a database for every second).
View Replies
View Related
May 8, 2014
What are the x- and y-coordinates of the Points referred to as p1, p2, and p3 after the following code executes? Give your answer as an x-y pair such as (0, 0). Recall that Points and other objects use reference semantics.
PHP Code:
Point p1 = new Point();
p1.x = 17;
p1.y = 9;
Point p2 = new Point();
p2.x = 4;
p2.y = -1;
Point p3 = p2;
p1.translate(3, 1);
p2.x = 50;
p3.translate(-4, 5); mh_sh_highlight_all('php');
P1:
P2:
P3:
My guesses were: P1:(20,10) //Correct
P2:(50,-1) //Incorrect
P3:(0,4) //Incorrect
View Replies
View Related
Mar 25, 2015
How to find coordinates of transparent area in the image. I working on .png image which has transparent background and transparent area in the middle of the image. The transparent area in the middle look a like ellipse, so i want to find coordinate of top, bottom, left, and right of that area. I am using opencv.
I have tried to find pixels and from result that i got, i understand that pixel with rgb that equal to 255.0 255.0 255.0 is transparent. what i have in my mind is, if rgb with value that equal to 255 255 255 detected, i will put 1 into arraylist named transparent, and if it not equal to 255 255 255 i will put 0 into the list. So when i look into the list, if there is 1 0 or 0 1 it means that border between transparent area and colored area or vice versa. But, how to know if that border is between transparent area in the middle of image and the image, and not between background and the image. Am i doing this correctly?
Here snippet of code.
Mat imgMask = Highgui.imread(imgfile);
double[] pixels = new double[3];
System.out.println("channel " + imgMask);
for(int x = 0; x < imgMask.cols(); x++) {
for(int y = 0; y < imgMask.rows(); y++) {
pixels = imgMask.get(y, x);
[Code] .....
View Replies
View Related
Apr 3, 2014
-7984749.593824852,5368675.690126911 -7984392.035620423,5367570.791302501 -7983220.843257783,5366848.500158152 -7982343.534350842,5364796.5795687605 -7980293.251969412,5363408.488192292 -7980621.978425723,5361760.555707421 -7979175.604281852,5359233.088002191 -7977402.284793513,5358332.850725802 -7976513.843937492,5357665.108234091 -7976472.321767421,5357241.582554582 -7974834.812057852,5357842.933691362 -7973351.925120993,5354420.819505452 -7973743.435770122,5354147.992005592 -7973309.512395002,5352911.428583422 -7973639.9086436825,5352740.575552852 -7972698.034432082,5350359.050518452 -7972255.539456172,5350294.883494262 -7971909.001881332,5349519.720176511 -7970907.683061652,5349775.605440161 -7970575.617020612,5348986.585139751 -7970013.342272613,5349482.445545332 -7969898.683197102,5350177.703443532 -7968337.649977702,5350328.647515352 -7967111.243147633,5351652.264468962 -7966171.150047882,5351373.1018466605 -7966125.286417683,5352115.720678982 -7964626.258154663,5351707.120082232 -7955765.449326492,5345109.379313592 -7954159.443032822,5343966.704795052 -7942364.363746833,5335522.893249432 -7929990.868386692,5326092.063381992
View Replies
View Related
Jul 23, 2014
I extracted columns from database and made calculations inside while loop. I know i need to make array to get from it coordinates for points. I want to draw them in interface created in another class but i have black hole and don't know how to get datas from while loop to array which is below.
View Replies
View Related
Mar 16, 2015
how to create coordinates in a two-dimensional grid, in the end it shall look like A5, F6 and so on. The aim is to place 3 DotComs in this grid by coincidence. To do this one uses two arrays. One array represents one DotCom, the other represents the grid's size, in this case 49 (7x7).The code ends like this:
ArrayList<String> alphaCells = new ArrayList<String>();
...
int x = 0;
int row = 0;
int column = 0;
while (x<comSize) {
grid[coords[x]] = 1; // mark master grid points as used
row = (int)(coords[x] / gridLength);
column = coords[x] % gridLength;
temp = String.valueOf(alphabet.charAt(column));
alphaCells.add(temp.concat(Integer.toString(row));
x++;
}
return alphaCells;
}
why row and column are calculated like this. Furthermore I don't understand why the column is used to generate a character, because columns are marked with numbers and rows are marked with characters.
View Replies
View Related
Apr 26, 2014
//Design/write a class named MyPoint to represent a point with x and y coordinates. The class should contain:
//->Two variables, x and y, that represent the coordinates
//->A no-arg constructor that creates a point (0,0)
//->A constructor that constructs a point with specified coordinates
//->Two getter (accessor) methods for the variables x and y
//-> A method named distance that returns the distance from a point to another point of the MyPoint type
//-> A method named distance that returns the distance from a point to another point with specified x and y coordinates.
//Draw the UML Diagram for the class. Implement the class. Write a test program that creates two points (0,0) and (10, 30.5) and displays the distance between them.
I have written the program but not I have to do it with user input ....
class MyPoint {
private double x;
private double y;
public double getx()
{
return x;
}
public double gety()
[Code] ....
View Replies
View Related
Jan 27, 2015
The code is used to find coordinates of an image and i cannot understand how it works.
for (int y = 0; y < height; y += 2) {
for (int x = 0; x < width; x += 2) {
int px1 = secureRandom.nextInt(4);
int px2 = secureRandom.nextInt(4);
while (px1 == px2)
px2 = secureRandom.nextInt(4);
int px1x = (px1 < 2) ? px1 : px1 - 2;
int px1y = (px1 < 2) ? 0 : 1;
int px2x = (px2 < 2) ? px2 : px2 - 2;
int px2y = (px2 < 2) ? 0 : 1;
View Replies
View Related
Oct 31, 2014
I am writing a java program that takes a FROM image, a TO image, and a ratio (this is a slide bar in the GUI). Here's my code:
Java Code:
public static BufferedImage rollUp (BufferedImage from,
BufferedImage to,
double ratio) {
BufferedImage finalBufferedImage = new BufferedImage(from.getWidth(),
from.getHeight(),
from.getType());
int packedColor = 0;
for (int r = 0; r < from.getHeight(); ++r) {
for (int c = 0; c < from.getWidth() ; ++c) {
[code]...
So from 0 to 1 (ratio is a double between 0 and 1) the image will "roll up". The effect works completely in the GUI, but the console freaks out at about 0.33 ratio.. This program runs for testing in a class Main and uses a class Splittinimage.. this method is in class TwixPix. When the main class is run, a box pops up with a combo box and a slider. You pick an effect (in this case, roll up) and then slide the slider to set the ratio. The image below those two things performs the effect that was selected. Imagine a PowerPoint presentation slide effect.
View Replies
View Related
Feb 15, 2014
Ok, so I am relatively new to datagrams etc. I have three projects set up right now: Client, Client2, and Server, which all interact with each other to send coordinates of player1 and player2 back and forth (X, Y, this is in 2D space not 3D). I have everything set up perfectly except for one problem: I can only send the X coordinate back and forth for each player. I am getting the weirdest error, a parsing error. The way I communicate is I have everything sent back and forth in one string. Then I use the .split() function to turn that string into an array that contains the x and y coordinates. I've done several tests and to no avail. Here's my code:
Server:
Java Code:
package theGame;
import java.io.IOException;
import java.net.DatagramPacket;
import java.net.DatagramSocket;
import java.net.InetAddress;
import java.net.SocketException;
import javax.swing.JOptionPane;
public class Main {
static String p1X;
static String p1Y;
[Code] ....
Lines 177 on Client1 and 172 on client2 are where the debugger is saying that I parsed wrong.
Also, if your are going to test this you will need to have the LWJGL libraries in your build path.
View Replies
View Related
Mar 6, 2015
The idea I'd like to present, concerns the correction of "designer" drawings - those done by the design consultants - against "site/construction" drawings - them being used on site by the workers to build the project itself.
This is normally a laborious process, involving being sat at a desk with two large folders, checking each detail and measurement against the design drawing.What I'd like to present is an idea, where the co-ordinates of the design or "mother" drawing, are transferred into a usable Java program, and they could be then used to ensure correct dimensions have been applied by the the sub-contractors in their "construction" drawings.Like I said, this can normally be a process of days for a site engineer to check - process known as "QA, quality assurance".
Basically, I just need to make a presentation of having a genuine interest in Software Design and Development. It could be applied in a range of areas in terms of construction site application - checking drawings, writing up work orders, dig orders etc - but the principle of having the co-ordinates of the mother or "design" drawing scanned into an array in Java as a means to output those site drawings/orders etc, applies to each potential application.
So - in short - and not looking for crystal clear detail, just general pointers - what programs or methods could transfer a plethora of co-ordinates from a design program like Auto-Cad, to a Java program, where I assume I would then be using a program containing a complex series of loops to ensure the correctness of the derived "construction" drawings; derived from the "mother" or designer drawings, that is.
View Replies
View Related
Feb 1, 2015
Basically I'm looking for a way to make one object follow another. For example, if I move object A to one area of the screen I want object B to to move to object A's location but I also want object B to move at a fixed speed (movement variable). How do I go about doing this?
Both the x and y coordinates of object B would need to know the coordinates of object A to calculate the distance between the two and to determine how much of which axis to increment/decrement (if that makes sense?) with the inclusion of the speed variable. In other words I'm just trying to create a homing object.
View Replies
View Related
May 29, 2014
(Corner point coordinates) Suppose a pentagon is centered at (0, 0) with one point at the 0 o’clock position. Write a program that prompts the user to enter the radius of the bounding circle of a pentagon and displays the coordinates of the five corner points on the pentagon. Here is a sample run:
Enter the radius of the bounding circle: 100
The coordinates of five points on the pentagon are
(95.1057, 30.9017)
(0.000132679, 100)
(-95.1056, 30.9019)
(-58.7788, -80.9015)
(58.7782, -80.902)
What we know , we know both the radius of the circle(user inputted) and the side of the pentagon from formula (double side = 2 * radius * Math.sin(Math.PI/5)) .We also know that one point is (0 .100) Also i know that the distance between 2 points is Math.sqrt(Math.pow(x1 - x2 ,2) - Math.pow(y1 -y2 ,2)) .
There might be other ways to solve it but this is my best bet trough i dont remember how to solve linear equations of the form x^2 + y^2 = - radius and radius ^2 = x^2 + (y - 100) ^ 2..
The solution i found is using the radius from the center to the point we want to find out and using the radius to the point we already know ( 0 .100) but i have to solve that damn equation first ...
View Replies
View Related
May 25, 2015
Need to know how i can store a value in File which is in Properties?
Here I am placing my Properties code :
ReportHTML C:/bea/user_projects/domains/OICDomain/applications/IIMS/IIMS/target/source/REPORT_HTML_DUMP/
ReportEXCEL C:/bea/user_projects/domains/OICDomain/applications/IIMS/IIMS/target/source/REPORT_EXCEL_DUMP/
My Java File :
File destHtmlFolder = new File("C:/bea/user_projects/domains/OICDomain/DOC_SERVER/REPORT_HTML_DUMP");
File srcExcelFolder = new File("C:/bea/user_projects/domains/OICDomain/applications/IIMS/IIMS/target/source/REPORT_EXCEL_DUMP");
View Replies
View Related
Mar 13, 2014
I have an XML doc that looks like this:
Java Code:
<?xml version="1.0" encoding="UTF-8"?>
<model>
<id>_1</id>
<nodes>
<id>_2</id>
<stencil>TASK</stencil>
</nodes>
<nodes>
<id>_3</id>
<stencil>TASK</stencil>
</nodes>
</model> mh_sh_highlight_all('java');
I have to create another xml doc with the properties of nodes from the first doc. For the new doc I have to create a parent node called "definitions". Instead of the "model" node in the first doc I have to create a "process" node in the new doc that has an attribute "id" which value is the same as the content of the "id" child node of model. For each "nodes" node in the first doc if their "stencil" child node content equals "TASK" I create a "task" node in the new xml doc.
Java Code: <?xml version="1.0" encoding="UTF-8"?>
<definitions>
<process id="_1">
<task id="_2">
</task>
<task id="_3">
</task>
</process>
</definitions> mh_sh_highlight_all('java');
[code]....
I just wanted to know if this is the correct way to define the respective classes.any way to create and fill the nodes for the new doc using this classes? I am used with DOM parser and I know how to create nodes and fill attribute values, but I have always done this job in a single class, not using different classes for the elements.
View Replies
View Related
Dec 18, 2014
I currently have some code using a JFrame. I am trying to access the items in a JList to save them in a TXT file. For this, I am using a "for" loop. The problem is, is that when I try to access the list items, I can't access them. The way I am trying to access the items is by using:
Java Code: listRight.getModel().getSize(); mh_sh_highlight_all('java');
BUT, I can't seem to get this to work. I tried to place this for loop everywhere and I can't access it. I tried accessing it under "public class Window", "private JFrame frmPcPartBuilder", "public static void main(String[] args)", "public void Initialize()" and I can't seem to access the JList. I basically have a save button that saves the list to a text file and the code I am trying to write is called by this button.
Java Code: package com.cooksys.assessment;
import java.awt.EventQueue;
import javax.swing.DefaultListModel;
import javax.swing.JFrame;
import javax.swing.JButton;
[code]....
View Replies
View Related
Jul 21, 2014
I am using JPF controllers. Already, i am loading a properties file in the controller
(using annotations @Jpf.Controller(messageBundles = { @Jpf.Message Bundle(bundlePath = "validation.validator.Messages") },).
I have a problem. Depending on one of the request variables, i need to load different properties files. All these property files have same keys, but with different messages. I need to take the user to different sites(though internally, the backend logic remains same...Look and feel of the front end along with messages to be shown change to make the users feel they are being directed to a different site).
I am thinking of loading the properties file from the JSP when the user logs in first time from login page so that these properties are available until the session expires & not read the properties file in Controller.
View Replies
View Related
Jan 16, 2014
I need to build the triangle like below. How to solve this using loops.
*
* *
* * *
* * * *
* * * * *
View Replies
View Related
Nov 25, 2014
class triangle
{
public static void main (String[] args)
{
System.out.println("Provide three side lengths - 000 to terminate.");
int a = In.getInt();
int b = In.getInt();
int c = In.getInt();
[code]....
My problem is that when I enter 5,2,5 it should be isosceles and acute but it comes out as isosceles and obtuse, and when I type 5,5,5 it comes out equilateral and right. The only one that works is if I enter 3,5,4 it will come out as scalene and right. I been at this for a while and my math looks correct.
View Replies
View Related
Feb 21, 2015
I'm trying to make a triangle which should look like this. But I cant seem o figure it out.
1
2 1
4 2 1
8 4 2 1
16 8 4 2 1
32 16 8 4 2 1
64 32 16 8 4 2 1
128 64 32 16 8 4 2 1
This is the code I have written so far.
public class TestProgram
{
public static void main(String[]args)
{
for (int columns=0; columns<=8; columns++)
{
for (int rows=columns; rows>=1; rows --)
{
System.out.print(rows+ " ");
}
System.out.println();
}
}
}
View Replies
View Related
Oct 17, 2014
I am having trouble getting my main triangle program to run. My teacher gave us a sample program, so I tried running his, and it doesn't run either.
Here is the class:
import java.util.Scanner;
public class ShelbyHarms_3_06_Triangle {
private double sideA, sideB, sideC; // Instance variables, numbers for area and perimeter
static Scanner console = new Scanner(System.in); // Establish keyboard
[Code] .....
My errors for the main program(the class has no errors) are:
helbyHarms_3_06.java:37: error: cannot find symbol
theSides.getSides();
^
symbol: variable theSides
location: class ShelbyHarms_3_06
[Code] ....
5 errors
View Replies
View Related
May 29, 2014
I'm developing an Applet that print a bar code using Jpos API. I need some jars and two configuration file. I've added jars to the classpath and configuration files in src directory. In Eclipse everything works fine.
DefaultProperties prop = new DefaultProperties();
prop.loadJposProperties();
SimpleXmlRegPopulator xmlReg = new SimpleXmlRegPopulator();
xmlReg.load(wincor.jpos17.THxxx.xml");
Everything works fine in Eclispe but I can't find property files when i call the applet from a web page. So I've checked the JavaPos sources and I've paste the loadJposProperties() and xmlReg.load("wincor.jpos17.THxxx.xml") content in my source code:
InputStream isD = prop.getClass().getClassLoader().getResourceAsStream(prop.JPOS_PROPERTIES_FILENAME); // (1) content of loadProperties
if (isD != null){
System.out.println("jpos/res/jpos.properties found");
[Code] ...
The same method is used to found wincor.jpos17.THxxx.xml. So when I call applet form the browser I get INPUT STREAM FROM PROPERTIES OK!! from (1) and jpos/res/jpos.properties not found from (2).
So getClass().getClassLoader().getResourceAsStream works if i write it directly in my code, but doesn't work if i call a jar method.
View Replies
View Related
