Though it may seem strange but in one of the application i work on still uses EJB 2.1 entity beans.While looking at the deployment log, seems like each Entity bean is registered using both remote-home and remote interfaces.
Using the remote-home's JNDI lookup i was able to get the EJBObject proxy and subsequently create and use the entity.But what about the remote interface JNDI lookup ? Reason i am asking is that one needs to create an entity before use it. That said, how to use the object that i get from remote interface JNDI lookup ? Note that the class of the returned object says its "com.sun.proxy.$Proxy13" type.The JNDI location i am using "java:app/EJBApp/Entity!com.abc.remote.Remote"
I'm trying to integrate google reverse geocoding address into my jsf application. I would like to be able to enter a postcode and hit a 'Find Address' button to bring me back all the addresses within that location. I have attempted the script below just to get something working in html then build a jsf2 page up. The results that I keep getting back are for a specific building rather than a list of houses within the same street. I think this is because I'm using the lat/long.
There is a weblogic server running at remote place and i need to access the API's in that remote method using JNDI lookup. My application is configured in Spring Tool Suite IDE with java 6 and tomcat 7 and I have used Spring to perform the jndi lookup of weblogic server. In spring i have used simpleremotestatelesssessionproxyfactorybean class to lookup a weblogic server using jndi and get the remote object. But somehow on doing it i'm getting the following error.
org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: Maybe at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(Unknown Source) at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(Unknown Source) at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.sendWithoutLock(Unknown Source) at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendFragment(Unknown Source)
[Code] ....
The exception is been thrown at com.sun.corba.se.impl.encoding.CDROutputObject method when calling writeTo(). Why I'm getting this error and can I do anything to remediate it. Irrespective of java this error occurs, i tried with java 5, 6 and 7 but still getting the same error.
I have set the session timeout in web.xml to 60 but when I start on the home page and begin to enter any data I immediately get redirected to the timeout page.From the timeout page I can click a link that takes me to the home page. Now I get the 60 minutes before another timeout occurs. Changing the timeout only results in a change to the timeout after going back to the home page..why I am seeing an immediate timeout?
I would like to be able to stop the method execution after 10 seconds and continue the normal execution of my class. This means:
- If doSomething() is executed in 3 seconds for example, the System.out.println() statement shows the result of the method
- If doSomething() is executed in more than 10 seconds, after 10 seconds the method is stopped and the System.out.println() will always have false as result.
I have a web application where the server has to write the excel document to the output stream.It takes more than 5 minutes for the server to write it.After 5 minutes i get a '504 gateway timeout' error code. I have tried setting the timeout values in the web container in Admin Console.Still the same problem.I followed this link.
[URL] ....
I even tried setting the ConnectionKeepAliveTimeout and ConnectionIOTimeOut values. But still didn't work. How do i increase the timeout value?
I have a problem with a JavaScript application on Safari 6 and 7. The application updates a smartcard on a website, through a JAVA applet using JavaScript requests.
There is no problem with other browsers. On Safari , randomly (1 smartcard's update on 10), the javascript completely freezes in the middle of an update (on a random card).
After 5 minutes exactly, the javascript resumes, and 2 behaviors happens : the update wether continues or stops completely.
We investigated a lot about this problem , at network and memory level. We use a lot of "setTimeOut" function (approximately 1100 times), and read that setTimeOut could cause problems with memory management on Safari.
So I'm working on some networking code and I have the Server running as its own thread, then I have a PacketListener which is contained in the Server, that is running on its own thread too. As of right now, the PacketListener waits for packets via DatagramSocket.receive() and then adds them to a queue. The Server runs in a loop and it checks that queue for packets and then polls the most recent and process it before sleeping for 1 millisecond. Here is my question though, I'm considering changing the program to a more observer pattern structure in that when the PacketListener would receive a packet, rather than add it to the queue, it'd notify the server which would process it. However, wouldn't this cause additional time required within the PacketListener thread dedicated to processing the packets rather than listening for them?
I have a multithreaded java program. I have a few worker threads which process data over a udp server. Then I have another thread for console input. The problem is when there is an error with one of the worker threads, and it prints to the console, my console thread loses "focus", that is, the while loop seems to no longer run. Here is the console thread:
My application uses Struts and IBM Web application Server. I have a question regarding session management. I have a variable stored in session scope, i.e. the name of the client. it is a intranet application. Now whenever the user leaves the browser screen for a long time, the session times out and losses the name of the client.
How to restore the variable after the client comes back and starts using the browser and refreshes the screen and starts using the application. I want just the browser to remember the session variable i.e. "name" of the client.
in my web.xml my session time out is working but not fully working in my ui i use tiles , i have 5 clickable side panels i try to set timeout for 1 minute or 10 minutes for testing after the time is timeout this what happen working refresh the page after time out = working ,directed me into log in page which is correct.i have 5 clickable side panel in my page after timeout when i click the first 2 in side panel tabs it directed me into log in page which is also correct not working after the timeout when i navigate the page i click the other 3 side panels i can still navigate into the page but when i click the first 2 side panel it directed to log in page w/c is correct but can still navigate the page the other 3 side panels
issue : my session timeout is not fully working on my page.
I've run in an issue with connection timeout in the WebView. Requesting the URL in a browser will result in an answer, however it may take some time. Running the same request from the WebView results in a connection timeout.
What is the connection timeout for loading a page through the WebView (from issuing the request webEngine.load(url) to the state change failed passes about 40s). The Request in a browser takes about 10s.
Can I manipulate the underlying connection of the WebView (as suggested at java - How to connect to an HTTPS URL from a JavaFX application - Stack Overflow)
Can I set the connection timeout on the WebEngine/WebKit or per request?Is there an issue targeting this?Likewise I would be interested to get a handle on the connection so I can evaluate the header data to retrieve useful information (like response was a PDF which cannot be rendered in the WebView)....
I'm a student designing and developing an Air Traffic Control (ATC) system for incoming aircraft, mainly implementing the part which handles the queuing system for approaching aircraft.
I'm trying to implement a functionality which will control the visibility of three outputText. I'm using a selectOneMenu, which has three options. Each option will enable visibility of one outputText, and rest will be invisible.
Initially all outputText s is invisible as rendered value is false, but when I select different options, their respective outputText s are not visible.
I am having a problem with the SelectOneMenu control. I want the the selected item to be be displayed via the valueChange Ajax event listen. But this is not happening.
However, when I change the value in the SelectOneMenu and then click on the Submit button, then selected value is getting displayed via the 'save' bean function
The relevant xhtml code is as follows:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:h="http://java.sun.com/jsf/html" xmlns:p="http://primefaces.org/ui" xmlns:f="http://java.sun.com/jsf/core"> <h:head> <style type="text/css">
I have developed JavaFx application with playback option using JavaFx Media player and slider controls. I am updating slider value using javafx mediaplayer.currentTime().addListener() method by adding Change/Invalidate listener.
While playing MP4 video, slider values are not updating (Change/Invalidate listener not getting triggered while playing video) on Mac OS(version : 10.9.1). Below is the sample code snippet.
I am new to JSF and I am working on handling session timeout for a JSF application. I am trying to get the code to work for ajax calls and not able to achieve that so far. I have tried two approaches:
Approach 1: SessionListener (for cleanup work) and SessionFilter (for filtering every request and checking if session timed out)
My Code snippet of doFilter() of SessionFilter:
if ((request instanceof HttpServletRequest) && (response instanceof HttpServletResponse)) { HttpServletRequest httpServletRequest = (HttpServletRequest) request; HttpServletResponse httpServletResponse = (HttpServletResponse) response; // is session expire control required for this request? (not required for home page or timeout page or JSF resources) if (isSessionControlRequired(httpServletRequest)) {
[Code] .....
Both these approaches work for non-ajax POST calls but not for ajax calls. When I run my app in debug mode, I can step through all the statements for ajax calls also, which gives me an idea that the control does come to my code, executes it but for some reason, nothing happens on the UI.
I have been trying to redirect user to a timeout page but the ideal thing would be to display a JSF dialog and upon hitting 'OK' take user to Home Screen (My app does not have a login screen.) I have a basic questions also, is view expiring exactly same as session timeout?
