Read Information From File - How To Get Highest Value
Nov 12, 2014
The requirement asked me to write a Java program to read information from the file, display the original information along with the player's average score of the season (one line for each player), and announce who is the highest average-scoring player of the team. But I always only get the highest which show the last player.
The point of this program is to read characters from a txt file and store them into a 2D array. After this has been accomplished, the information is to be printed in the same manner it is read from in the txt file.
Here is the code I have so far:
import java.io.File; import java.io.FileNotFoundException; import java.util.Scanner; public class Main { public static void main(String[] args) throws FileNotFoundException
[Code] ....
And this is the error I am receiving when trying to accomplish the goal of the project:
Exception in thread "main" java.lang.NumberFormatException: For input string: "############" at java.lang.NumberFormatException.forInputString(Unk nown Source) at java.lang.Integer.parseInt(Unknown Source) at java.lang.Integer.parseInt(Unknown Source) at Maze.<init>(Maze.java:15) at Main.main(Main.java:20)
What's going on here and how I can correct this?? The information I am trying to store in a 2D array and then print is this:
The main method will drive your program by doing the following:
-Create an array to hold all the individual golfers and par scores (type is Golfer[ ]). -Prompt the user for a data file containing the Par scores and the player names and score. The format of the input file should look like
I am now stuck. I am writing a program that reads information from a data file and runs it through but program. However, I am almost finished with the program, but cannot figure out the last few parts.
public class Storm { private final double KnotsToMPH = 1.15; // global user-defined types: private int beginDate; private int duration; private String name;
[Code] .....
I have not attached the data file because it contains a total of 360 lines of hurricane information.
What is printed is much larger than what I've copy and pasted but I can't post it all here.
The error I get is:
Exception in thread "main" java.io.IOException: Stream closed at java.io.BufferedReader.ensureOpen(Unknown Source) at java.io.BufferedReader.readLine(Unknown Source) at java.io.BufferedReader.readLine(Unknown Source) at Map.importMap(Map.java:26) at Map.main(Map.java:44)
In a text file, I have individual titles (starting with ">" character), and under those titles, I have calculated values for a Counter. I want to search the entire text file for the highest counter under every title. After I get the highest counter, I would like to print it's title, name of the counter, and counter value. Example of the code I already have:
int letterCounter; String line; if (line.startsWith (">")) { bw.write (""); bw.write (line); } else { //code that counts how many total letters (letterCounter) under title }
The program should copy person with the highest percent from the file 'plik1', and then put it to the file 'plik2'.The problem occurs while compiling.
Java Code: string cannot be resolved to a type string cannot be resolved to a type string cannot be resolved to a type string cannot be resolved to a type string cannot be resolved to a type string cannot be resolved to a type string cannot be resolved to a type string cannot be resolved to a type mh_sh_highlight_all('java'); Code:
where the first number is student number and the second is their grade. I need to read this information from a .txt file and dynamically create a new node containing that student's number and mark, and insert it in the correct position in the linked list (in descending order based on grade). So I get that each Node needs to contain two data types, an Int for Student # and a Double for their grade, and I'm pretty sure I've done it correctly with my StudentNode class which can be found in the source code linked above.
But what I don't get it using that class to create Nodes in my main class and then sort them based on their Double grade value WHILE they are being sorted. I just don't understand where to actually put the methods and such that does these things. Apparently I'm supposed to have three classes.
One named StudentNode which is just the node info, which I have done.
The second is called StudentList which is apparently supposed to contain the head of LinkedList and the methods I need? I'm not sure how it ties into StudentNode though.
The third and final is just the main class which I'll use to test it.
Then after all that I need to print out the median mark through a recursive method that isn't allowed to use any loops or call and functions/methods that use loops. The function should return the node in the list which contains the median mark. Secondly, in order to find the median, you need to know how many items in total are in the list. Your recursive function must calculate that number (also recursively); you may not keep track of this count elsewhere your program. Your recursive solution should only examine each node only once, and the depth of the recursion should be equal to the number of nodes in the list.
Here's my current in-progress code.
import java.io.FileNotFoundException; import java.util.Scanner; class StudentNode { private int studentNum; private double grade; private StudentNode next;
[Code] .....
I'm pretty sure the StudentNode class is fine, it's the StudentList class that I'm not sure about. I'm not sure how to add nodes since there isn't a getNext() method in the StudentList class.
I need to write a program that will let a user input name, age, email, and cell phone number, and commit the input to a text file. They need to add multiple entries. I figured out how to create the file and write to it, but when the user enters a second set of information, the first is overwritten. How can I make the file be added to instead of overwritten? The following is my code:
try { FileWriter writer = new FileWriter("ContactInformation.txt"); BufferedWriter bw = new BufferedWriter(writer); nameTextField.write(bw); bw.newLine();
I am working on a project that requires me to build a database with random access file, representing products, the base product contains a name (about 30 characters), a price (double), and a quantity (integer). I have worked on this project for probably 15+ hours and have tried so many things and feel like I've barley made any progress...
The part i am really struggling with is taking the data from the text file and creating an object array with it using the product class. Once ive accomplished that, i have to use that data to create a random access file with the data.
Here is the base Product class that must be used to create the objects for the array.
public class Product { public String pName; public String stringName; public double price; public int quanity;
[Code] .....
And then here is the data from the text file that i must extract to use to create product objects.
These continue for about 40-50 entries, they are not separated by a blank line though i had to add those so it would display correctly, each entry is on its own line with name separated with spaces, then price after a comma, then quantity after the second comma.....
New to programming. Am supposed to create a program that reads a text file (of integers) and computes a series of computations on these integers. I don't have the code for the integers in my code yet, (i know how to do those), but am struggling getting the array to simply print in the print writer. I have the user select a text file, read the file with a scanner, and then save the computations done from my code into another file. specifically, the problem is as follows: Write a program that uses a file chooser dialog to select a file containing some integers. The file contains an integer N followed by N integers. The program then uses a file chooser dialog to let the user specify the name and location of an output file to write results to.The data written to the output file will be as follows
(1) The original list of N numbers from the input file, (2) The original list of N numbers printed in reverse order of how they appear in the input file. (3) The sum and average of these numbers, (4) The minimum of all the numbers, (5) The maximum of all the numbers.
Well my code is supposed to ask for an input file and then (ex: input.txt), read the input file and create an output.txt file with the anagram for the words in the file. Also it should be displayed on the screen. However my code doesn't display the anagram on screen or the output file!
/* This program will read a file given by the user, read the words within the file and determine anagrams of the given words. If the file that the user inputs is empty, then the program will output "The input file is empty." * The program will read the file line by line, counting the total number of words read. If there are more than 50 words, "There are more than 50 words." * will be printed, and the program will terminate. After each line is read, the words in the line will be separated,punctuation characters will be removed, and upper case characters will be switched to lower case. * If any word is larger than 12 characters, that word will not be considered in the total amount of words in the file and it will not be sorted. * After each word is read, the letters will be sorted and stored into an array containing each * word's 'signature'. After all the words have been read, words will be printed to the output file on the same line based upon their signature. */
public class Anagram { //Creating constants for maximum words in file and maximum chars in word public static final int MAX_CHARS = 12; public static final int MAX_WORDS = 50;
I am trying to create a file browse option in my jsp and later after browsing, all i want to do is to read that file in my jsp without saving it into that database so that i can perform encryption for it and save that encrypted file later into my database. please provide reference link so that i can refer to some applications and and move ahead with my work.
I am trying to write to a file but everything I have tried doesn't seem to work. What I want to do is read a file and then output back to the same file on a new line. The text file contains the sentence "Java is a programming language".
import java.util.Scanner; import java.io.*; class HW1B { public static void main(String[] args) { Scanner fileIn = null; try { fileIn = new Scanner (new FileInputStream("text.txt"));
[Code] ....
These are the errors :
HW1B.java:19: error: no suitable constructor found for Scanner(FileOutputStream) fileOut = new Scanner (new FileOutputStream("text.txt")); ^ constructor Scanner.Scanner(Readable) is not applicable (argument mismatch; FileOutputStream cannot be converted to Readable) constructor Scanner.Scanner(InputStream) is not applicable
[Code] ....
Note: Some messages have been simplified; recompile with -Xdiags:verbose to get full output 2 errors
I am trying to read a file and input each line of the file into an array. I have not set the array size as I was hoping to fill the array using a while loop. Unfortunately the scope of the array does to work inside the while loop so I am being told that the array 'students' has not been initialised even though it has just outside of the while loop. Is it possible to do what I am trying to without having the array initialised in the while loop as surely the array will be reset every time if it was in the while loop? Here is my code:
public static void students(String file) throws FileNotFoundException { try { File studentInfo = new File(file); Scanner input = new Scanner(studentInfo); String[] students;
I am writing a program that needs to read from a file, but I can't even get it to open. I have tried saving the .txt file 2 different ways. First, I saved the file to my src/package folder. Then I tried just the src folder. Then I tried going through Import/general/filesystem/ and selecting the root directory. However, my program is still unable to open the file.
I am trying to read from a file and storing them back in the file but its not working, I think the way I am reading is wrong or something. Is the for loop correct way ?
try { in = new BufferedReader(new FileReader("Events_data.txt")); for (int x = 0; x <= Events.length; x++) { tid = in.read(); te = in.readLine();
So i am creating a File object which has a text file passed to it. I then try to do logic with it using a BufferedReader. However, I get a FileNotFoundException on the using my code below. The Error is on the BufferedReader line. I
Java Code: System.out.println("--Reading text file--"); File file = getFile(c,fileName) // Returns a File object. System.out.println(file); // Shows me the file is looking correct. Displays contents to console. BufferedReader br = new BufferedReader(new FileReader(file)); System.out.println("BUFFERED"); while((line = br.readLine()) != null) { try { // Do Logic } catch(Exception ex){ ex.printStackTrace(); } br.close(); mh_sh_highlight_all('java');
You are given a text. Write a program which outputs its lines according to the following rules:
If line length is ≤ 55 characters, print it without any changes. If the line length is > 55 characters, change it as follows: Trim the line to 40 characters. If there are spaces in the resulting string, trim it once again to the last space (the space should be trimmed too). Add a string... <Read More> to the end of the resulting string and print it.
I felt as if I did do what they were asking, but for some reason, I'm getting "Sorry, Unable to read file!"."Instead of using file, I did use the location of the file name".Also, I've attached a image of the input looks like and the output.
My CODE:
import java.io.BufferedReader; import java.io.File; import java.io.FileReader; public class Main { public static void main (String[]args) { try{
I need to get excel file into jtable . I'm searching for this problem for 1 weak and no results . I downloaded hssf packages and didn't make a change in reading...
For the unit 3 assignment, you must develop a program. that reads the file icecream.dat. This file is supplied in the Files for Unit 3 Assignment directory in Unit 3. You must use TextIO methods to read the file. As you read the file, count the total number of ice cream cones that were sold. (This is the same as the number of lines that you read from the file.) Also count the total number of "Strawberry" cones that were sold.
At the end of the program, print out the total number of cones, the number of Strawberry cones, and the percentage of cones that were Strawberry.To do this program, you have to know when to stop reading from the file. TextIO has a function named TextIO.eof() to check whether the entire file has been read. The value of this function is true if the entire file has been read. The value is false if there is more data in the file. You want to continue reading from the file as long as TextIO.eof() is false.
Note: Suppose that flavor is a variable of type String and you want to test whether its value is "Strawberry". To do this, test whether flavor.equals("Strawberry"). (Do not use == to test for equality of Strings.)
Each line of the file icecream.dat is an ice cream flavor such as "Vanilla" or "Strawberry." A line represents the sale of one ice cream cone of the given flavor.
You must complete your program, test, debug, and execute it. You must submit your java code file. The output of your program must be captured by either copying the content in the output window and pasting it into a text document that you submit along with your java code file, or by capturing the image of the screen which contains the output of your java program. In windows you can capture a screen shot with the Ctrl Alt and Print Screen key sequence. This image can then be pasted into a Word, WordPad, or OpenOffice document which can be submitted with your assignment.
For students using the programr service online. Make sure that you create both the TextIO.java and the icecream.dat files as java project files. I found it was easier to rename icecream.dat to icecream.txt for some reason. For students using Netbeans, use the same set of rules that were defined in Unit 2 to setup your project and incude the TextIO.java file as we did in unit 2. Also make sure that you copy the icecream.dat file into your project directory so that it can be found by your java program.
