Swing/AWT/SWT :: Fitting Dynamic JTable Inside A Dialog Or Frame?
Apr 22, 2014
I want to calculate the height of a dialog that contain only a table depending on how many rows that table it has so I'm using the cross multiplication rule.For example i check initially that my table is well fitting into the dialog(Without space at the bottom) for some value and after that i use the cross multiplication rule because data are dynamic.But unfortunately this rule does not solve the problem.What's the best rule for fitting a dynamic table inside a dialog or a frame? Here is my code.
public class FlowLayoutChangingGap {
public static void main(String[] args) {
// just for testing perpose but data are getting from database and it's dynamic
Object[][] data = {
{ "Kathy", "Smith", "Snowboarding", new Integer(5) },
{ "John", "Doe", "Rowing", new Integer(3) },
I am building a GUI application which consists of two panels "panel" and "panel1". "panel1" have a button "addTimer" when clicked it should add the "panel" to the frame if i gain click the button it should again add the "panel" without overlapping the previous "panel" rather it should be created below the previous "panel". If i click on the button "addTimer" n times it should add the panel n times. Along with this the frame size has to dynamically change depending on the number of panels produced. Below is the code i tried my level best to satisfy the above conditions.
package superTimerV2; import javax.swing.*; import java.awt.*; import java.awt.event.*; public class SuperTimer extends JFrame { private static final long serialVersionUID = 1L;
In the method mouseClicked(MouseEvent me) the co-ords of the click are obtained.
* if they are within the confines of the rectangle rect, console output System.out.println("inside box") is displayed * in either case the click co-ords are displayed in the console
I'm getting the co-ords of the mouse clicks but no message when the click is inside the box
import java.awt.*; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; /* Experiment 04 was successful. So now (Experiment 05) I must try and see if I can identify mouse clicks that occur within the rectangle. */
public class AFrame extends Frame implements MouseListener { ARectangle rect; public AFrame(ARectangle rect) {
I have used netbeans to build my app. So there creating jTable is out of my control as that part was inside auto-generated code. I have just used the jTable.setValue().
My problem is, above method is inside a button click event. Updated values not displaying until the loops ends.
When editing a cell, the existing code would use the right/left cursor keys to move from cell to cell as opposed to from character to character when editing a cell. I planned to override the functionality by tossing in the above code as a test to see if it stops the functionality before I override it.
After placing in the above code, the above functionality no longer occurs, but now the cursor moves within the cell as I wanted which is to move from character to character instead of cell to cell. Its great it works, but it really shouldn't. Essentially the default behavior has been restored when it should have really disabled the left/right keys.
I assume there is some underlying class someplace that is doing something to affect the behavior. Since a sample can't be provided I am wondering in what scenarios would the e.consume() restore default functionality?
I have a bookings table where customers can view their bookings and in the table there is a button with a command button that onclick goes to the dialogue to display the variable petUpdate value but if you have 2 bookings then all the update buttons display the value of the last petUpdate in the arrayList.
DataTable with the button
<p:dataTable id="bookingTable" var="customerBooking" value="#{booking.sessionBookingList}" editable="true" style="margin:0px 0px 20px 100px;font-size:15px;width:600px;" >
Code in the above datatable.......The commented out output label displays the correct value for each but when the button is clicked the dialog only displays the last ones value
The below program ask the user to enter the value of x 1 , Y 1 and radius in separate boxes , What would look nice is if the user can Enter the Value X ,Y and radius in the same box.
import javax.swing.JOptionPane; public class C3E29GeometryTwoCircles { public static void main(String[] args) { // Ask the user to enter the x1 coordinate. String strNumber = JOptionPane.showInputDialog("Enter the value of x1 coordinate " ); double x1 = Double.parseDouble(strNumber); strNumber = JOptionPane.showInputDialog("Enter the value of y1 coordinate " ); double y1 = Double.parseDouble(strNumber);
I am wondering how to do the following:when a user clicks on a save menu item, a save JFileChooser pops up. I would like to have a default file name set in the FileName box on the chooser, similar to what applications like Microsft word has. Right now, no file name will appear until the user has selected a file.I also need to know how to get the text from this box in the case that the user enters a new file name (the getSelection function is not useful here because the user will not have selected an existing file.)
I wish to display a progress bar during a lengthy file translation process. When I created a ProgressBar class to do this and tested it with a short test program, it seemed to work fine. But when I add my ProgressBar class to a package containing various other classes, put that package in a jar file, and then execute the class using the progress bar from a menu in my main program, the frame of the progress bar shows up with the appropriate caption but the JLabel, JProgressBar, and JButton are not displayed. I have gone over my code numerous times and checked that the ProgressBar class constructor is getting the proper arguments.
// package gov.nasa.jpl.ephemeris; import java.awt.*; import java.awt.event.*; import javax.swing.*; /** * Progress bar with message text above the bar and a Cancel button below it */ public class ProgressBar extends JFrame { private boolean _cancelled = false; private JProgressBar _progressBar = null;
[Code] ....
I have also been wondering whether I need a separate instance of the border for each panel, or whether I can just create one instance and use it for all three panels.
The question is Write a program that displays all the numbers from 100 to 1000, ten per line, that are divisible by 5 and 6. and separated by exactly a space.
My assignment requirements are to display this in Dialog Box / message box . I have written this code so far
import javax.swing.JOptionPane; public class Exercise04_10 { public static void main(String[] args) { int count = 1; for (int i = 100; i <= 1000; i++) if (i % 5 == 0 && i % 6 == 0)
I'd like to change the text on the two buttons which I have in my Dialog Box, how should I do this?
Also, when I click the X Button in the top right of the Dialog Box, nothing happens, and the program only stops when I end it in jGrasp. How do I make this button close the program when clicked on?
import javax.swing.*; import java.util.Random; public class SwingInputExample { public static void main(String args[]) {
I wrote the following code to get a frame,button in south and a red color circle,which i got.In the "actionPerformed" method i wrote "setContentPane(mp2)" thinking it would put another panel on the frame with a blue circle but when i pushed the button,the button got stuck and the circled did not change.
import java.io.*; import javax.swing.*; import java.awt.*; import java.awt.event.*; class Fra implements ActionListener { MyPanel2 mp2; JFrame frame; JButton button; public static void main(String[] args)
I've used Netbeans IDE to create a simple Swing JFrame container, class NewJFrame.
NewJFrame calls another JFrame with dialog in it. Problem is there is an endless call made to it. Here's the issue relevant piece of code:
//Code for calling class package p; public class NewJFrame extends javax.swing.JFrame implements ActionListener { ......... public NewJFrame() { initComponents(); //IDE auto generated code for binding
[Code] ....
I searched but i cannot understand why run class is getting called multiple times. I have attached the screen prints for both the screens. 2nd screen print(of called class) is very shallow since screen was blinking unstopped due to multiple calls, but i have attached a faint image of it.
I simply want to paint an image on my frame, just once each time the paint() method is called, but how to call the paint method in any good way. This is how it looks:
i have problem with the following two java classes, driver class Reservations and Room class. When i run, it just show blank frame, tell me where i gone wrong.
import javax.swing.JOptionPane; import java.awt.*; import java.awt.event.*; public class Reservations extends Frame implements ActionListener { Color lightRed=new Color(255,90,90); Color lightGreen=new Color(140,215,40); Rooms room=new Rooms(5,3);
I am in the progress of updating my code and re-testing after switching from Java 6 to Java 7. When I open multiple JInternalFrames in my application under java 6 I am used to closing the top most internal frame and having the frame immediately under it become the next active frame. When I run the same code under Java 7 I see a different behaviour in as much as when I close the last frame I opened, the next one to become active is the first one.
To illustrate this another way, lets say I open 5 internal frames, 1,2,3,4 & 5
In java 6 when I close frame 5, frame 4 becomes the active frame.
In java 7 when I close frame 5, frame 1 becomes the active frame.
I have been doing a project of ERP solution using JAVA AWT FRAMES and MYSQL(for database purpose). Here there is an ADMIN portion, who has the authority to make PAYROLLS of individual employees. There is a Frame where individual employee details will be shown(like basic salary, HRA, no.of leaves, other allowances...etc) in text boxes.
Now what i want is to make a PDF file of that payroll, so that I can make a hardcopy of it. The idea is just like anyother online form fill-up, where at the end you submit and save (or export) as a PDF (or text file) document. But I mention that it is a stanalone project, not an online one (i think it doesn't matter though).
So the basic idea is how to make a PDF file by extracting the text field or choice contents from a frame in JAVA AWT.
I'm having trouble with this program. In my textbook it says "Write an application that displays a frame containing two panels. Each panel should contain two images (use four unique images - your choice). Fix the size of the first panel so that both of its images remain side by side. Allow the other panel to change size as needed. Experiment with the size of the window to see the images change orientation. Make sure you understand why the application behaves as it does". I successfully imported the images, but I can't find out anywhere how to allow the second panel to change size with the window.
import java.awt.*; import javax.swing.*; public class TwoPanels { public static void main(String[] args) { JFrame frame = new JFrame ("Embedded Images"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); ImageIcon iconOne = new ImageIcon ("glove.jpg"); ImageIcon iconTwo = new ImageIcon ("cleats.jpg"); ImageIcon iconThr = new ImageIcon ("bat.jpg"); ImageIcon iconFou = new ImageIcon ("baseball.jpg");
I am trying to make a 2d graphical animation using the java swing classes in order to make a frame. I had a basic version working when all of the code was under the main method, but when I moved some into another method it broke it. With y understanding of java my code should work as I create a variable of the method containing the code and then assign the size and exit button. However this causes many problems such as my BeaconFrame method informing me that it is unused when I have used it. Here is my code:
import javax.swing.*; import java.awt.*; public class BelishaBeacon { public void BeaconFrame() { JFrame frame = new JFrame(); JPanel panel1 = new JPanel();
I have a Single Frame Application and I simply want to prompt the user with a dialog confirming they really want to close before they actually close the program, specifically when they click the X in the upper right. I THOUGHT it was like any other java application, with the slight added complexity of having to target the program-created-JFrame with: ".getApplication().getMainFrame()".
With that code, DO_NOTHING_ON_CLOSE is set on the JFrame, yet the program closes anyways. Which I don't understand.So I did some reading and found this: URL....That lead me to the configureWindow override, where I successfully tried this:
root.addWindowListener(new WindowAdapter() {
@Override public void windowClosing(WindowEvent e) { // write your code here System.out.println("Window Closing"); } });
But as far as I can tell that will only let me react to the window closing, not to the command to close it, where I could then kill the command in the dialog if they so "no I'm not ready to quit yet", if that makes sense. So, how to give a prompt before closing?I am using netbeans IDE to create this app - not sure if that is relevant, since maybe it is an oddity with the IDE and not Single Frame Applications.
I am writing a ComputerBaseTest application with Netbeans. I have each question on a panel and I want the questions(panels) to be switched, viewing the previous and the next question on a single frame, but I do not know how.
I only understand frame switching if each questn is to be on a frame but each score on each question (frame) do not sum up to give the overall score at the end of the test. Using multi-frame shows a sign of bad programming.
I'm having some problems with the graphics of my hangman game. The graphic that's supposed to show up on the first guess (the hangman pole) doesn't show up until guess number 2. And on the eighth guess, no graphics show up (I just get a blank frame).
import java.awt.*; import javax.swing.*; public class HangmanFigure extends JPanel { private int guesses; private Image background; public HangmanFigure() { super();
I have a Jframe and i want to add inside 4 different jpanel.This is easy.
what is difficult is how can i change them dynamically with 4 other new jpanels and 4 other new jpanels?
I have try with BorderLayout but not working.
It's a wizard like but not the same.
I have a jpanel with jbuttons jpanel with a jtable jpanel with textarea and jpanel with jlabels. All this have to change with other 4 jpanels, where to look?
