While Loop With Two Sentinel Values Is Terminating Early
Sep 25, 2014
The program is supposed to print all even and odd numbers between 50 and 100 using ONE while or do while loop. The evens work, but the program terminates after printing 51 for the odds, which doesn't satisfy the second value sentinel value for the while loop.
public class EvenOdd {
public static void main(String args[]) {
int x = 50;
int y = 50;
int i = 0;
int j = 0;
System.out.print("Even numbers between 50 and 100: ");
I'm trying to change the code on a Fibonacci series program that would allow me to exit the loop early if I exceed a specified number. The user enters any 2 random numbers (which will be the 1st 2 no.'s of the Fibonacci sequence printed to screen) and then continues up to a 'limit' on the number of numbers set in code. Here's the code:
int[] array = new int[limit]; //Define an array whose length is set by an int value for limit!! array[0] = x; //User supplies a int value for x which takes the 1st position in the array!! array[1] = y; //...and an int value for y in the 2nd position!! for (int i = 2; i < limit; i++) //Start from the 3rd position of the array when carrying out calculations!! { array[i] = array[i-1] + array[i-2];
[Code] ....
To exit the code/ 'limit' early if the array prints a number higher than 100, I tried putting a 'while' condition before the last line, as follows:
while (array[i] < 100) System.out.print(array[i] + " ");
Can I even use a 'while' loop within an array, or is there some other way I need to integrate it?
public void setBackground(URL url,int x,int y,int width, int height){ this.setLayout(null); this.backgroundX=x; this.backgroundY=y;
[Code] ...
note it is NOT important to me that I use the getResource. I just want to be able to create a runnable jar that can be downloaded and runs using Images. I do not know were they are located only that they are in the same package
So I'm trying to write a program that takes in 20 numbers and computes their average and I'm supposed to use a while loop to read the values and to make sure that all the numbers are positive. My while loop is set up and does all the math correctly but I have completely forgotten how to taken 20 numbers from the user all at once and then run them through the while loop.
HERE IS MY CODE SO FAR:
public static void main(String[] args) { int num = 100; int count = 0; int total = 0; while (num >= 0 && count < 20){ if (num %2 == 0){ total += num; count++; } } double avg = total/20; System.out.println("The Result Is: " + avg); }
how to use the CTRL-D in my program. The program records the amount of times a positive and negative integer is typed. When the user decides to end the program, they will use the CTRL-D to terminate the program. After the button combination has been pressed, I spit out to the user the results. The problem is when I press CTRL-D the program just terminates and I can't even get it to read the next line of code. ....
I'm new to Java and am trying to create a simple payroll program that uses a while loop to repeat until the user enters "Stop" for the employee's name. I've tried everything I can think of and everything others have suggested and for some reason, I cannot get the program to differentiate between the word "Stop" or any other word. what I'm doing wrong? My code is as follows:
import java.util.Scanner; // imports scanner class for user input public class Payrolltest { public static void main( String[] args )// begins execution of program { Scanner input = new Scanner( System.in ); // creates a scanner to obtain user input String Employee = "name"; // employee's name
(Count positive and negative numbers and compute the average of numbers). Write a program that reads an unspecified number of integers, determines how many positive and negative values have been read, and computes the total and average of the input values (not counting zeros). Your program ends with the input 0. Display the average as a floating-point number.
I moved the different boolean statements around, but I'm not getting the sentinel value to end the run. It continues to let me add integers endlessly. The code I wrote is below:
package exerciseFourOne; import java.util.Scanner; public class AverageOfIntergers { public static void main(String[] args) { // TODO Auto-generated method stub int positive = 0; // number of positive integers int negative = 0; // number of negative integers int sum = 0; // value of sum of integers
Write a program that creates an array that can hold 9 double values that represent baseball batting averages for a starting baseball lineup. Use a for loop to populate array with random double values in the range of 0.00 to 0.500. Recall that "double" values are what Java calls "real" numbers. Use a second for loop to print the values in the array with one number per line. Finally, use a third for loop to traverse the array and find and print the maximum batting average in the array. Note: you will need to use String.format to control the precision of a double number when you print it- Here is my code so far:
public class P2F { public static void main (String[] args) { double [] player= new double [9]; //player[0]= Math.random(); for (int index=0; index < player.length; index++) {
[Code] ....
When I open the terminal window I get different variations of this [D@4545c5]. I would like to know all the things I am doing wrong.
Write java program using table that stores celsius and farenheit values that are equal to one another using a loop. use C 0-20 and convert to farenheit.
I have to use doubles for Celsius and Fahrenheit and in the formula. I get a runtime error with the following displayed:
I will display a table of temperatures in their Celsius and Farenheit equivalents.
celsiusfarenheit
import java.util.*; import java.lang.*; import java.io.*; class TemperatureConversion { public static void main (String[] args) throws java.lang.Exception { double celsius;// Temperature in degrees Celsius minimum double farenheit;// Temperature in degrees Fahrenheit
I have used netbeans to build my app. So there creating jTable is out of my control as that part was inside auto-generated code. I have just used the jTable.setValue().
My problem is, above method is inside a button click event. Updated values not displaying until the loops ends.
Started learning about Array's I'm doing an exercise where you create a for loop that randomly assigns values to each element within the array, but where is my code going wrong?
import java.util.Scanner; public class ArrayExamples{ public static void main(String[] args) { Scanner input = new Scanner(System.in); double exampleArray[] = new double[5]; System.out.print("Enter a Number: "); int num1 = input.nextInt();
I had to write a foor loop to count the values of a stack of quarters from 1.00 to 3.00 and I had to print the values, that I understood and got it working so I taught the next assignment was going to be easier but I am having a hard time with it. For this one I have to write a for loop to print all the positive integer factors of 144 and I am supposed to print of factor per line but I tried doing that but it doesn't work it just prints out 144.
This is my code. The quarter assignment is also in there because it is part of a lab so just ignore that part since it is working correctly.
public class ForLoopPractice { public static void main(String [] args) { // Write a for loop to count out the values of a stack of quarters from $1.00 to $3.00 // Print the value of each iteration. Print this all on one line, rounded to the nearest cent. // To print rounded, use printf, with a placeholder of %.2f // (%f is the floating-point placeholder; the .2 indicates the number of decimal places) /* YOUR CODE HERE */ for (double q = 1.00; q <= 3.00; q += .25)
Write a java program that will ask a user to input grades until the user inputs the sentinel value -1. The program should test each input to determine whether 0<=grade<=100. If the grade entered is within this range, the program should print "Grade accepted;" if not, the program should print "Invalid input".
I am trying to print a loop inside an array of a greater size than the loop itself. Like for example I have an array of size 7 but it has only 3 elements.
now what I want to do is print these three numbers in a loop so that my array[3]=2;array[4]=3;array[5]=4 ...... till the last one. Also the array could be any size and not just 7.
I need a way to store the pixels values currently on the screen and compare them to the values on the first frame. Right now I'm using glreadpixels as follows:
currentBuffer= BufferTools.reserveByteData(mapSize); glReadPixels(mapStartX, mapStartY, mapWidth, mapHeight, GL_BLUE, GL_UNSIGNED_BYTE, currentBuffer); for (int i = 0; i < mapSize; i++) { if (currentBuffer.get(i) != baseBuffer.get(i)) { //Do nothing continue; } //Do something }
This works perfectly fine but turns out to be a real bottleneck, dropping the fps to a third of what it was. Is there any quicker way? All I'm after is speed, I don't even need to show it on the screen if the comparison is made "behind the scene".
Here's the code: it's while loop inside a for loop to determine the proper length of a variable:
for (int i = 0; i < num; i++) { horse[i]=new thoroughbred(); boolean propernamelength = false; while (propernamelength==false){ String name = entry.getUserInput("Enter the name of horse "
[code]....
I was just wondering what was going on here -- I've initialized the variable, so why do I get this message? (actually the carat was under the variable name inside the parentheses.
I have everything else working. My problem is that when i type "quit" to close the outer loop. It still runs the inner loop. The National Bank manager wants you to code a program that reads each clients charges to their Credit Card account and outputs the average charge per client and the overall average for the total number of clients in the Bank.
Hint: The OUTER LOOP in your program should allow the user the name of the client and end the program when the name entered is QUIT.In addition to the outer loop, you need AN INNER LOOP that will allow the user to input the clients charge to his/her account by entering one charge at a time and end inputting the charges whenever she/he enters -1 for a value. This INNER LOOP will performed the Add for all the charges entered for a client and count the number of charges entered.
After INNER LOOP ends, the program calculates an average for this student. The average is calculated by dividing the Total into the number of charges entered. The program prints the average charge for that client, adds the Total to a GrandTotal, assigns zero to the Total and counter variables before it loops back to get the grade for another client.Use DecimalFormat or NumberFormat to format the numeric output to dollar amounts.
The output of the program should something like this:
John Smith average $850.00 Maria Gonzalez average $90.67 Terry Lucas average $959.00 Mickey Mouse course average $6,050.89 National Bank client average $1,987.67
Code:
public static void main(String[] args) { Scanner scan = new Scanner(System.in); String name = ""; int charge = 0; int count = -1; int total = 1; int grandtotal = 0; int average = 0;
I have a question in mind that this is my registration form. I am sending these values from HTML form to server and database. I have question that in my case if I click next to Add Another Mobile no in HTML.then a block is genereated and each time a new name is generated.
My Question is if I click 6 times then 6 name attribute are generated. How can I send and differentiate them on my server side.
Because at their I will use something request.getAttribute("Attr_Name");
I have a JScrollPane with two coulmns. In the first column I have an image pane JTable, and in the second a list with names of sections. This second column I try to divide in two columns, one (the second column) to display the names of the sections (each row contains one name), and in the other column (the third) I want to show some values for every section in the row respectively. But, instead of displaying the desired values in the third column, I get the same names of the sections as in the second column.
How to convert this program from a while loop to a for loop.
import java.util.Scanner; public class LongDivision { public static void main(String arguments[]){ Scanner input = new Scanner(System.in); System.out.println("Enter the dividend: ");
I am trying to make a program add values from a loop. So what its supposed to do is search through tokens on an imported file. The file lists State, Capital, and then capital population. Then take the population string, turn it into numbers, and then do stuff with the numbers. First I'm supposed to find the Highest and lowest population of the places in the file (which I did without problem), but the finally thing is I'm supposed to add each found population to the last so I can find the average of the populations.
I just cannot seem to grasp how to do that. I THINK I'm supposed to some how store the given value into a variable, but how do I get that variable to add to the new value?
like...? Get token -> a b = a c = a + b
or wait no.....
Java Code :
import java.io.*; import java.util.Scanner; public class CapPopS { public static void main(String[] args) throws IOException { File stateCAP = new File("state-capital-2004population.txt"); if (!stateCAP.exists())