Write A Java Program That Uses A While Loop
Apr 9, 2014Write a java program that uses a While loop and persistent output to count down from 33 to 0 by threes, and put each value on a separate line, also do this in for loop.
View RepliesWrite a java program that uses a While loop and persistent output to count down from 33 to 0 by threes, and put each value on a separate line, also do this in for loop.
View Replieshaving some trouble doing this. Here are the requirements:
1)Write a program using loop and break to calculate the value of PI.
2)You can use the following equation to calculate PI. PI=4/1-4/3+4/5-4/7+4/9-4/11+4/13 etc.. The program shouldn't loop until the criteria is satisfied.
3)The criteria is the value of PI you get is very close to the “real” value (3.1415926), meaning that their difference
should be smaller than a very small numeric number, e.g., 0.0001).
4)The control structures you may need for this program are loop, if-else, and unlabeled break.
5)The output should have the format: for each iteration, it has iteration number and the corresponding value of PI until that
iteration. The last line would be the final value of PI.
Here is my code so far:
package ids;
public class IDS {
public static void main(String[] args) {
double pi = 0;
for(int i=1; i<=100000; i++){
if ((i%2)==0){
pi+=(4/(2*i-1));
[code]...
Design, write a java program to input 7 integers and, for each integer, calculate and display its square and cube.
View Replies View RelatedProject is due before midnight eastern time (3 more hours). I have been working on this all day, we have not learned arrays or anything and just started 'for' loops. I don't really know how to implement that system yet. However, he wants us to check all the possible handwritten math ways of doing this. I have tried but I cannot return my numbers beside the card.my program only prints the type and I still have more cases to add as well..
QUESTION: Write a Java program that reads 5 integers, each of which is in the range of 1 and 13 representing a simplified poker card with no suit. Your program should then print the ranking of the hand with card number(s) beside the ranking. The rankings to determine are Four of a Kind(4 of the 5 cards of the same rank), Full House(3 of the 5 cards of the same rank, and 2 cards of another rank), Straight(5 cards of sequential rank), Three of a Kind(only 3 cards of the same rank), Two Pair(2 cards of the same rank, 2 cards of another rank, and no card of either rank), One Pair(only 2 of 5 cards are of the same rank), and High Card(no two cards of the same rank). Some sample runs are:
input: 2, 3, 2, 2, 2; output: Four of a Kind(2)
input: 2, 3, 2, 3, 2; output: Full House(2, 3)
input: 2, 3, 4, 5, 1; output: Straight(5)
input: 1, 13, 11, 10, 12; output: Straight(1)
[code]....
I want to create and write to a excel file from a java program. I found a tutorial online and wrote a java file as under:
Java Code: import java.io.File;
import java.util.Date;
import jxl.*;
import jxl.write.*;
public class jExcel{
WriteableWorkbok workbook = Workbok.createWorkbook(new File("output.xls"));
public static void main(String args[]){
WriteableSheet sheet = workbook.createSheet("First Sheett",0);
Label label = new Label(0,2,"A label record");
sheet.addCell(label);
[code].....
But when I compile this file, I get errors telling that package jxl does not exists and so on. Do I need to download it ?
Write a java program to read the time intervals (HH:MM) and to compare system time if the system time between your time intervals print correct time and exit else try again to repeat the same thing. By using StringToknizer class.
View Replies View RelatedI have an excel spreadsheet, with a specific filename and location which doesn't change (e.g. C:/workbook.xls)What I would like to do is have a window open when I open an .exe file, and in this window is a bunch of check boxes, text areas and drop down boxes (I can implement these, that's about my level of JAVA)
Then, when I click on a button in this window (for example, a button which says "Save"), the data from all these boxes and menus etc. goes into specific cells in the excel spreadsheet. Or if certain values are selected from a drop down menu, then a bunch of cells are empty.
There are two versions
1. The words remain in their places but the letters are reversed. Eg I love you becomes Ievol uoy
2. The words are also reversed. Eg I love you becomes uoy evol IWrite a program that use the java String class methods.
I am trying to write a java program that asks the user for a list of names (one per line) until the user enters a blank line. At that point the program should print out the list of names entered, where each name is listed only once (i.e., uniquely) no matter how many times the user entered the name in the program. I am supposed to use an ArrayList for this problem.
My idea for a solution is to create an ArrayList<String>, read each name, i.e., line, entered and then to see if that name is already in the ArrayList. I created a for loop to check each element in the ArrayList but when I try to assign an element to a string variable I get the error "Type mismatch: cannot convert from Object to String". Not sure why that is happening because the ArrayList is defined as a String list.
Here is the code so far.
/*
* File: UniqueNames.java
*/
import acm.program.*;
import java.util.*;
[Code].....
Write a Java program that reads a positive, non-zero integer as input and checks if the integer is deficient, perfect, or abundant.
A positive, non-zero integer, N, is said to be perfect if the sum of its positive proper divisors (i.e., the positive integers, other than N itself, that divide N exactly) is equal to the number itself. If this sum is less than N, the number is said to be deficient. If the sum is greater than N, the number is said to be abundant.For example, the number 6 is perfect, since 6 = 1 + 2 + 3, the number 8 is deficient, since 8 > 1 + 2 + 4, while the number 12 is abundant, since 12 < 1 + 2 + 3 + 4 + 6.
SAMPLE OUTPUT:
1.)Input N: 5
5 is deficient.
2.)Input N: 6
6 is perfect.
3.)Input N: 18
18 is abundant.
Ex. If I type 5943, the program will say
mill = 5
hun = 9
ten = 4
uni = 3
get the picture I had to translate the decimal value names from a different language.
This is what I have tried...,
Java Code:
import java.util.Scanner;//Permite el uso de leer el teclado del usuario
public class DeterminarValorDecimal//Nombra el documento
{
public static void main(String [] args)//Podemos ver la clase
{
[Code].....
But what this does is I have to enter the single digits one by one. I want to be able to type the whole number. Is there a method that reads the length of the whole number and lets me classify each digit so I can do what I want to do?
My son want to create a java program (Diamond shape) that can plot graph for with the following data.
Pattern type is:
* *
* *
*
* *
* *
*
Write a Java program that calculates the area and volume of a cube, sphere, cylinder, and regular tetrahedron. Your program should obtain the necessary input for each of the objects from the console and output the input, area, and volume of the object. Use appropriate messages to guide the user of your program.
Here what i did, i am not sure if this is what the assignment want, but this is the best method i could come up with
//Khang Le
import java.util.Scanner;
public class InputAreaVolume {
public static void main(String[] args) {
[Code]......
I want to write a java program which displays to get the GPA of a student as a keyboard input. Then display the class of the degree according to the following criteria using a switch-case statement (if-else statements cannot be used). If the user insert an invalid gpa you should display a message Invalid GPA.
gpa ≥ 3.50 First Class Hons
3.49 ≥ gpa ≥ 3.00 Upper Second Class Hons
2.99 ≥ gpa ≥ 2.50 Lower Second Class Hons
2.49 ≥ gpa ≥ 2.00 Pass
2.00 ≥ gpa Fail
Here is my code:
import java.io.*;
public class q7
{
public static void main(String[] args)
{
InputStreamReader ISR=new InputStreamReader(System.in);
BufferedReader BR=new BufferedReader(ISR);
[code]...
.But when I use Command console to run this it says: 1111.jpg. I also wanna know is there another way to do this with switch- case statements.
Write a java program to store employee information in a linked list, the program should implement the following functions:
The program should display the list of functions, and ask the user to enter the number of function that he/she wants to do, then perform the function as it is required in the previous table.
import java.util.*;
public class Employee {
Scanner in = new Scanner(System.in);
String Name;
String Address;
String Department;
int ID;
int Salary;
[code]....
this is my out put
Please choose a number:
1-Add a new employee
2-Update employee's info
3-Remove employee's info
4-Exit
1
Enter name:
Enter address:
2
Enter department:
3
Enter ID:
4
Enter salary:
now:
1- why are not my adding coming out in the output only the Enter name & Enter address ??
2- how can I add names and ID's and information to test that program
1.Write a JAVA program that will input 10 scores and output the Highest and Lowest score.
2.Write a JAVA program that will input the base and power and display the result: Example: Base is 4 Power is 2 the answer is 16 (Note: Math.pow( ) method is not allowed)
3.Write a JAVA program that will input an integer number, and then will output the sum of all inputted numbers. The program will stop in accepting inputs if the user entered 0.
which when user enter a number then will display how many * in a line .Produce a line: ***** But my code only show 1 * there... what wrong with it ?
import java.util.Scanner;
public class display {
public static void main(String args[]) {
int i,n = 0 ;
[Code] ...
Four experiments are performed, each consisting of six tests. The number of test results for each experiment is entered by the user. Write a Java program using a nested loop to compute and display the average of the test results for each experiment.
You can run the program by entering the following test results:
Experiment 1 results:23.231.516.927.525.428.6
Experiment 2 results:34.845.227.936.833.439.4
Experiment 3 results:19.416.810.220.818.913.4
Experiment 4 results:36.939.549.245.142.750.6
Write a nested loop for a pyramid pattern. Well here's an ugly description of what it should look like:
1
1 2 1
1 2 4 2 1
1 2 4 8 4 2 1
1 2 4 8 16 8 4 2 1
1 2 4 8 16 32 16 8 4 2 1
1 2 4 8 16 32 64 32 16 8 4 2 1
1 2 4 8 16 32 128 64 32 16 8 4 2 1
I managed to make the pyramid using addition. However, how to turn it into multiplication x 2.
import java.util.*;
public class NumbersPyramid
{
public static void main(String[] args) {
int odd = 1;
int numSpaces = 7;
[code]....
How do i write a program using textEdit? I can't even get the examples to open?
View Replies View RelatedMy program successfully reads a file, reports back what it finds and creates an output file. However, I cannot get it to write to the output file, it is always blank!
Here's my code:
import java.util.Scanner;
import java.io.*;
public class Ex19
{
public static void main (String [] args)
{
//Variables
[code]....
I have to write a program that find the sum of two numbers 62 and 99 and stores them in a variable named total. However, I have one error that I just can't get rid of and can't tell what it is. I'm using jGrasp and here's what it says:
Programming Challenge #5.java:14: error: class SumofTwoNumbs is public, should be declared in a file named SumofTwoNumbs.java
public class SumofTwoNumbs {
^
1 error
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
and here: is my code:
import java.util.Scanner;
/*
* To change this license header, choose License Headers in Project Properties.
* To change this template file, choose Tools | Templates
* and open the template in the editor.
*/
/**
// This program has variable of several of the integer types.
public class SumofTwoNumbs {
public static void main(String[] args) {
[code]....
Write a program called GeometricMean that prompts the user to
1.Enter the number of values (total number of instances) that should be processed
2.A set of values to be processed (in a while loop)and then calculate the geometric mean of the values entered. You should use a while loop to perform the multiplication part of the calculating the geometric mean. The program should output the initial data and the labeled geometric mean. Consider printf, and DecimalFormat.
My Program:
import java.util.Scanner;
public class GeometricMean{
public static void main(String[] args) {
Scanner keyboard= new Scanner(System.in);
[code]...
How to Write Program with out using control structures
IMG_4216.JPG
I'm trying to use graphics for my programs and here I'm trying to write a program that searches through files for text received from a JTextField. However, it does not seem to be working as my message is not displayed when text is found...
I used applet. Here are the functions:
JTextField jtf;
JFrame jf;
public void init()
[Code].....
I'm rather new to programming and I'm trying to make a gui program that will allow the user to create text files. They will be prompted to enter what they'd like to save their file as and then they will be allowed to input text to that file . They will also be allowed to open their files to modify or view its contents. So to start things off, I'm making a prototype if you will.. I've been able to save to a file the problem occurs when I try to read/display it.
Main Class:
public class MainActivity {
public static void main(String[] args) {
// Access to other classes
WriteFile writer = new WriteFile();
ReadFile reader = new ReadFile();
[Code] ....