for x = 0 to 9
set stars = "*"
set count = 0
while count < x
stars = stars + "*"
count = count + 1
endwhile
display stars
endfor
I need to change this pseudocode to Java, but I'm new, been trying for ages but can't get it right.
calculate how long it would take to pay off a loan of 500 pounds if there was 10% interest monthly, and 100 pounds was paid each month. This code is in a pseudocode,
set months = 1
set balance = 500
set totalpaid = 0;
while balance > 100
balance = balance - 100;
set interest = balance * 0.1
balance = balance + interest
totalpaid = totalpaid + 100
months = months + 1
endwhile
totalpaid = totalpaid+balance
display "you paid "+totalpaid
display "It took you "+months+" months"
I can't spot where my java implementation of insertion sort differs from the pseudocode here:Well, there is one difference in the parameters used by the insert method, which is inconsistent in the pseudocode.I'm pretty sure it should be calling insert (a,n) instead of (a,i,n);
insert(a,k) i←k
x ← a[k]
while x < a[i − 1]
x ← a[i]
a[i ] ← a[i − 1] i ←i −1
a[i]←x return
insertion-sort(a,n)
m ← select-min(a,1,n) swap(a,1,m)
fori from2upton
insert(a,i,n) return
Here is my attempt at a java implementation, which doesn't actually seem to do anything.I've kept variable names as in the pseudocode. Might technically be bad practice, butI think it should make it easier to follow in this particular scenario.public class InsertionSort {
public static void main(String[] args) {
int[] array = { 99, 2, 44, 14, 14, 44, 11, 33, 14, 14, 51 };
insertionSort(array, 10);
for (int i : array)
System.out.print(i + " ");
[code]...
Why am I so interested in this pseudocode when there are simpler java-ready examples of insertion sort on the internet? Simply because this is the code the professor uses, so I should be able to understand it.
I have been given this Pseudocode for the Quicksort algorithm:
quicksort(a[], p, r)
if r>p then
j=partition(a[], p, r)
quicksort(a[], p, j-1)
quicksort(a[], j+1, r)
[code]....
I was wondering why:
- why the condition left < right needs to be true for the while loop in the function Partition
- what the while loop does in the function Partition
how to print from bluej onto actual paper? how to do the formatting and configuration etc.
View Replies View RelatedI have a java code that should sort an array of names based on the last name. e.g jane a, jane b, jane z, jane d should be jane a, jane b, jane d, jane z. I have the following code but for some reasons, the s1 in the comparator method is always null.
public class ShuffleName {
public static void sortNames(String[] names){
Arrays.sort( names, new Comparator<String>() {
public int compare( String s1, String s2 ) {
String s1last = s1.split("s+")[1];
String s2last = s2.split("s+")[1];
return s1last.compareTo(s2last);
[code]....
have to create a file named Lab13.txt. In the file I have 10 random numbers. I have to import the 10 numbers and have to Multiply all the numbers from Lab13.txt by 10 and save all the new numbers a new file named Lab13_scale.txt. so if the number 10 is in lab13.txt it prints 100 to Lab13_scale.txt. how do i get it to Multiply Here is what I have:
Java Code: import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintWriter;
import java.util.Scanner;
[Code].....
I have a project where I am required to read and write a vector of bank account objects and I am struggling with this concept. I was able to figure it out when the accounts were not stored in a vector but now that I am dealing with vectorsThis is my best attempt. Even though I know it's wrong, what I am trying to do.write/read methods in main:
public static void readTrans()
{
textArea.setText("");
chooseFile(1);
try
{
FileInputStream fis = new FileInputStream(filename);
ObjectInputStream in = new ObjectInputStream(fis);
for (int index=0; index != fileIndex; index++)
[code]....
I am currently working on a java project, this involves me writing some code for a project, below are my attempts at coding so far:
/**
* Prints out details of all animal in the zoo.
*
*/
public void printAllAnimals() {
System.out.println("
Details for all animals in Zoo " + zooId);
System.out.println( "==================================");
[code]....
I currently cannot get the printallanimals() method to work as it should when executing the method printallanimals it just opens a filedialog box, when it is suppose to use the Collection object c,so that animals stored in the zoo can easily be checked.
I'm doing this assignment in which i have to write some products in csv file...but as u can see in csv file two products are same "Cooking Oil"..so any method that can add two same product's quantity and their amount and write them in file
import java.util.*;
import java.io.*;
public class SalesbyTransactionMonth{
private static final String fileName = "Data.txt";
private static final String fileName1 = "sales_by_trans_month.csv";
String line = "";
[Code] ....
Attached image(s)
I have a big problem with writing Gauss Elimination in Java code. This is my homework, it's true. But I want to learn this, and I don't know how to bite this. I must realise some points:
1) Create new class - Gauss Elimination with two attributes (table A (nxn) and table B with vector (n));
2) Add new method "eliminate" which transform matrix A and parametr vectors B ;
3) Add new method "solve" which calculate inverse substitution.
i have to write more than 100000 rows in a excel sheet (file size more than 20 MB) via java.
when i use XSSF, i am getting below Error.
java.lang.OutOfMemoryError: Java heap space
at org.apache.xmlbeans.impl.store.Saver$TextSaver.resize(Saver.java:1592)
at org.apache.xmlbeans.impl.store.Saver$TextSaver.preEmit(Saver.java:1223)
at org.apache.xmlbeans.impl.store.Saver$TextSaver.emit(Saver.java:1144)
[Code]....
when i use HSSF , i am getting the below Error.
java.lang.OutOfMemoryError: Java heap space
I have tried increasing the java heap size , by giving upto -Xms1500m -Xmx2048m
So I am trying to write the output of two different java class files to one txt file while the program runs. The file name is determined before the program is ran, through the command prompt as arguments. How can I get the second class file to edit the same txt file without running into compile errors.
For right now I'm just going to send everything that the second file outputs to a message String variable, so that the Main class outputs to the the text file. I still want to learn how to write to the same text file directly from the second class file.
import java.io.*;
public class Test{
public static void main(String[] args) throws IOException{
int x;
//create a new file internally called doc. But externally labelled the user input
File doc = new File(args[0]);
if (doc.exists()){
[Code] .....
I was wondering if you use an IDE when writing programs?Can you use J frame when using command line or is it just used with an IDE and do you go into framing in the book?I have taken programming classes and I am still stuck.
View Replies View RelatedI'm using opencsv and I want to write two arrays into a csv file and each array should be in a column. For example:
Column1 Column2
2423542 2332332
5242324 4343434
4242352 7565656
4343434 6565656
public class Writer {
[Code] ....
With my code the arrays are all in one column. What do I have to change that my output will be in two columns?
I am using a FileOutputStream to write a file but it is not writing data to destination file from source
Here is my code
package org.kishor.outputStream;
import java.io.FileOutputStream;
import java.io.IOException;
public class WriteToaFile {
public static void main(String args[]) throws IOException
{
FileOutputStream fout = null;
[code]...
find a bug where i am wrong why data is not on output file?
I have copied a wav file as explained in [URL] ..... When trying to play my new file, it runs but no sound is hear. My reading and writing class is as explained in another post in the site:
This is the function that reads the file:
// read a wav file into this class
public boolean read(DataInputStream inFile) {
myData = null;
byte[] tmpInt = new byte[4];
byte[] tmpShort = new byte[2];
[Code] ....
I can't hear the copied wav file, but still the wav file is correctly copied...
I am writing a program in Java where a user adds 1 stamp on a letter for every five sheets of paper in it (or fraction thereof)For example, I if I have 11 sheets of paper, I add 3 stamps. If the total number of stamps is more than 3, they don't send it.
I need to ask the user how many sheets of paper they have, and then calculate the appropriate number of stamps based on the formula above. I just don't know how to write the math formula to calculate this, i'm stuck. So far I have:
package test;
import java.util.Scanner;
public class LetterMailing {
public static void main(String[] args) {
Scanner stdIn = new Scanner(System.in);
int numSheets;
[Code] .....
What should I do next?
I've looked at multiple sources and everyone is saying different stuff. Which one should I be using? FileWriter/FileReader, other people was saying PrintWriter, and one even said : "Formatter" which is the one I'm doubting mostly. My purposes for writing files is for like saving maps, saving high scores, etc.
View Replies View RelatedI'm working on assignment for a class where I'm creating a home utility auditor. Basically the user has to pick from a list of appliances and then input various fields to calculate a total cost. When the user chooses "washer" from the list of appliances, they must enter in values for 2 separate fields, and will then click calculate to get total cost. I've been trying to implement this through an if, else statement, but it's not wanting to calculate a total cost and I'm running into errors. I've put the code below.
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// The calculate button will multiply the 3 fields that the user inputs:
//cost*Kw used*hours used=total cost of operation
float num1,num2, num3, result;
//now, parse the text to a type float
num1= Float.parseFloat (costField.getText ());
[Code] ......
I have accountsData.txt file in my default package, this is the file it should be writing to and reading from.
There is an ATM class, which has the main in it. From here the program is supposed to work like an atm, you type in your account number and can withdraw or deposit. It is supposed to then write the changes to the file.
//Read from a file.
public void loadAccounts(String inputFileName) throws IOException
{
Scanner fin = new Scanner(new File(inputFileName));
// Variables to store the values.[/color]
int account = 0;
double balance = 0.0;
[Code] .....
Okay so I have to write a method to compute the following series: m(i)= 1/3 + 2/5 +....+ (i / 2i+1) and write a test program that displays a table " i = m(i)" 1=0.3333 2=0.7333....all the way down to 20 which is 9.2480. I have written something and cannot seem to get the sum of the fractions to display .
public class ExtraCredit1
{
public static void main(String[] args)
{
double num;
double sum = 1;
[Code] ....
public class Tester
{
public static void main(String[] args)
{
Product p1 = new Product();
p1.loadFromFile("Monitor.pr");
System.out.println("Actual: " + p1.toString());
System.out.println("Expected: Product [id=12345, name=Monitor, description=A freakin great monitor!]");
p1.setId(11111);
p1.setName("another product");
p1.setDescription("Description of another product!");
[code]....
The expected output is what my program should be doing and the actual output is what it's doing instead. As you can see, my code works for the middle test. But I cannot understand why it won't load the first fileFor the second half, the id and the quantity are separated by a comma... I'm not really sure how to deal with that. As you can see, I tried using a delimiter, but it doesn't seem to be doing any good.
Recently I discovered power of Java, I'm coming from Perl, Python world so I'm at very beginning. I have firm understanding of OOP and I'm ready for new challenges. I have question regarding writing to database performance and theory.
Basically as my personal project I'm trying to write some small program or addon which will enable me to write concurrently to database. Let's say that I have some software and that has FIFO output to database in single stream, but since the output interface is not fast enough congestion can occur if the input to the system is high.
I would like to extend that software with addon which will take that one output stream and create 2,3,4 concurrent input streams towards database. API from that software is provided so I can redirect output to third-party extensions and apps.
I thought you can use PrintWriter to write to the console but when I run the following code I only get "abc" printed to the console.
import java.io.*;
class Class1{
public static void main(String...abc) throws Exception{
PrintWriter writer = new PrintWriter(System.out);
writer.println("test");
System.out.println("abc");
}
}
I realized I wasn't capitalizing certain things, and when I did it i was able to run the compiler. is there a utility or tool that auto formats the capitalization and such? I read kathy mentioning about eclipse I installed I don't know where that feature is.
View Replies View Related