I am new to java and programming in general. I figured out how to convert an integer input to binary however I am having issues doing the opposite of converting a user input binary number to a decimal.
I need to do this with basic math (or string depending on how I represent the binary) and no functions.
I know how to convert binary to integer on paper but I am having a hard time working it out in java.
I am trying to make a program that calculates the change due in dollars and cents. The user inputs both the amount due and the amount tendered. My program only works with whole numbers?
View Replies View RelatedSystem.out.print("To begin, please enter 1 to choose stand tickets or 2 to choose terrace tickets for your party. ");
int standOrTerraceTickets = aScanner.nextInt();
while (standOrTerraceTickets != 1 && standOrTerraceTickets != 2)
{
System.out.print("Invalid input. Please enter 1 for stand tickets or 2 for terrace tickets. ");
standOrTerraceTickets = aScanner.nextInt();
}
Okay I thought I had this working properly so that when the user entered anything other than 1 or 2 they would keep getting an error invalid input, however, that only works when the user enters an integer. If the user enters anything other than a number, the program crashes. How does one prevent this from happening?
I am designing a program in-order convert Binary to Decimal values with added features:
Rejecting binary values longer than 32 bits
Prompting the user to make multiple entries after completing the binary to decimal conversion of their first entry. I was trying to code this in Nested For Loops, but I don't know if I've really done that.
Here is what i have so far.
public class BinaryToDecimal {
public static void main(String[] args){
Scanner scan = new Scanner(System.in);
String binary;
int decimal=0b10, i, rem;
boolean isBinary = true;
[Code] ....
Write a program that reads from the user an integer and reduce it by multiplying its non-zero digits. The result of the multiplication is a number which is to be reduced as the initial one. This process continues until an integer of one single digit is obtained. For example:
64734502 (6 * 4 * 7 * 3 * 4 * 5 * 2) 20160 (2 * 1 * 6) 12 (1 * 2) 2
Your program should display the number obtained in every iteration.
Sample run1
Enter an integer: 64734502
After iteration 1: 20160
After iteration 2: 12
After iteration 3: 2
Sample run2
Enter an integer: 97737999
After iteration 1: 6751269
After iteration 2: 22680
After iteration 3: 192
After iteration 4: 18
After iteration 5: 8
Write a program that prompts the user to input an integer and then outputs both the individual digits of the number and the sum of the digits.
Now I have a code for spacing out the integers, and I have a separate code for adding the digits. But I am not sure how to merge them together. Both of them work independently
Spacing code:
import java.util.*;
public class SumoftheIntegers
{
static Scanner console=new Scanner(System.in);
public static void main(String []args) {
int num1, test, rem;
int counter = 0;
[Code]...
Now the sum of the integers code:
import java.util.Scanner;
public class sum
{
public static void main(String[] args)
{
// Create a Scanner
Scanner input = new Scanner(System.in);
// Enter amount
System.out.print("Enter an integer: ");
int integer = input.nextInt();
[Code]...
so i'm following a java tutorial from the book and it has a few challenge questions. and i'm stucked on one. i think i just don't understand what is it that its asking me. heres the question, Write a statement that reads a user's input integer into the defined variable, and a second statement that prints the integer. assuming scanner is given, and i checked my heading code is ok.
Scanner scnr = new Scanner(System.in);
int userNum = 0;
System.out.println("What is the product of 8 time 2");
userNum = scnr.nextInt();
[code]....
Goal is to: Write a program that prompts the user to input an integer and then outputs both the individual digits of the number and the sum of the digits.
First I don't know where I made mistakes here, and the only error it finds right now is that str2 was not initialized and I cannot figure out where/when to initialize it.
import javax.swing.JOptionPane;
public class DigitsAndSum {
public static void main (String[] args) {
String str1;
String str2;
int int1 = 0;
int int2 = 0;
[Code] ....
I've been working on a question using parallel arrays where the user inputs an integer 1-12 and the output will be the name of the month and the number of days in that month. This is what I have so far
import java.util.*;
public class DaysMonth
{
public static void main (String args[]) {
Scanner keyIn = new Scanner(System.in);
int[] days = new int[]{31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
[Code] ....
After I enter the user int it just ends.
I am trying to write a program for converting positive binary inputs into hex.Why am i getting this errors while compiling my binary to hex converter..
Exception in thread "main" java.lang.NumberFormatException: For input string: "148.0"
at java.lang.NumberFormatException.forInputString(Num berFormatException.java:65)
at java.lang.Long.parseLong(Long.java:441)
at BinToHex.convertbintohex(BinToHex.java:24)
at Test.main(Test.java:4)
Here is my BinToHex class
import java.io.*;
public class BinToHex {
double tempDec,fractionpart;
long longofintpart,templongDec;
String inpu ="1001.01";
String hexOutput,intpart,tempDecString,hex = null;
[code]....
I've started writing a new program that Scans for some strings. I want to specify a random Integer to those Strings in order to do my desired idea. what should I do?!! my codes are here :
import java.util.Random;
import java.util.Scanner;
public class Draw {
public static void main(String[] args) {
System.out.println("This Program is written to solve little problems in families cause of doing unwanted works!!");
[code].....
now I want to Specify an Integer to each person that has been scanned! for example if the first person is " David " , which is a String, in the next step :
Random randomNumber = new Random();
randomNumber.NextInt(101);
int David = randomNumber.NextInt(101);
I want to what should I do?
There's a main menu choosing binary,octa,hexa,and decimal if i choose decimal it will display decimal menu and then i will input the numbers of binary and then it automatically display the converting process for octa hexa and decimal. and if i choose octa . It display the octa menu and i will input the numbers in octa and then it automatically display the converting process for binary hexa and decimal.. and so on.. but in binary if i input 2 it will display invalid .. the same as octa hexa and decimal... in my code the only problem is the converting process. our instructor said no one will use a converter for our project. we will code it manually ..so for a moment .. this is my code..
import java.util.*;
import java.lang.*;
public class mainmenu {
public static void main (String[]args) {
Scanner in = new Scanner(System.in);
char B, O, H, D, Q, L, N , Y;
char bin , pk, pick ;
[code]....
I am trying to write a program for converting positive binary inputs into hex. in the hex output the point (".")is missing.
Suppose my expected output is e7.6 , but i am getting e76
only the "." is missing.
here is my BinToHex class..
import java.io.*;
public class BinToHex {
double tempDec,fractionpart;
long longofintpart,templongDec;
String input ="11100111.011";
String hexOutput=null,tempDecString,hex = null;
static int i = 1;
[Code] ....
I want to make a program that reads numbers from a text file and transforms them into integers and then displays on the screen, but i can not do this with numbers greater than ten as the read () method of the BufferedReader only reads character by character. If he has to read the number 34 or 2343, for example, i don't know how to turn that chars into a single integer value. How can i do this in a more elegant way than the way i show to you below? That was the solution i found, but i believe there is a cleaner and more elegant way of doing. I would also use the Integer and Character type to solve this problem. I'm trying to use less primitive data types. The following code works fine just with number 0 -> 99.
I would like to use Character and Integer now.
int number[] = new int[2];
int i, carac;
i = 0;
do {
carac = leitor.read();
if (carac != -1 && carac >= 48 && carac <= 57) {
[Code] .....
I am trying to write a program for converting positive binary inputs into hex. in the hex output the point (".")is missing.
Suppose my expected output is e7.6 , but i am getting e76.
Only the "." is missing.
Here is my BinToHex class..
import java.io.*;
public class BinToHex {
double tempDec,fractionpart;
long longofintpart,templongDec;
String inpu ="11100111.011";
String hexOutput=null,tempDecString,hex = null;
[Code] .....
Here is how decimal fraction is converted into hex or here too...
Run the code along with the attached csv file. The GUI contains a short explanation of what I am looking for. I have tried converting the integer array to a string array but the output is not the same as the command line. I receive errors when I compile.
View Replies View RelatedBasically I need to make a program prompts the user for an integer, check to make sure the length entered by the user is a power of 2 and at least 2. Then I need to convert from base e to base 2 then I need to print the tick marks of a ruler based of the value of the length.
I got the whole converting thing working and the check for a power of 2, that wasn't an issue because it didn't require any recursion. I just don't know how to print out the proper tick mark values.
The way it is supposed to work is that it needs to look like this. Say the user enters 8;
012131210
012345678
Or if the user enters 16;
01213121412131210
01234567890123456
The bottom row is pretty much just the index value, that I print fine.
The top row though is supposed to be the length of the ticks on a ruler, with the middle most value being the value of the conversion from base e to base 2 from above. I can get that printed and what I get just looks like this.
For 8;
000030000
012345678
For 16;
00000000400000000
01234567890123456
As you can see I can get the middle value and the index values below but I don't know how to use recursion to get the right numbers.
Here's my current code.
import java.util.*;
public class TickMarks {
public static void main (String args[]){
Scanner input = new Scanner(System.in);
boolean looping = true;
while(looping == true){
System.out.print("Please enter a length: ");
[Code]...
Now the methods isPowerOfTwo() and printLength() both work fine. However, I'm not sure how to get the left and right side working.
My thoughts were to split the length in half and get a left and right side. I gave both of them arrays so I can keep track of the values. Now as you've seen above I get all zeros and I know it's because that's the default value in an array, I just don't know how to get the proper values.
Here is my code, basically I'll tell you what my program is suppose to do, I want to be able to leave the text box's empty if I like I want to skip 1 or more or all if I like skipping just basically means 0 but getting this error, it's forcing me to type in them all.
Exception in thread "AWT-EventQueue-0" java.lang.NumberFormatException: For input string: ""
at java.lang.NumberFormatException.forInputString(Unk nown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at StockControl.addToStock(StockControl.java:86)
[Code] .....
My code :
import java.awt.BorderLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JLabel;
import javax.swing.JTextField;
[Code] .....
I am supposed to write a program on PuTTY using UNIX (I have Windows 8), but I am not comfortable with it yet, so I am using Java through NetBeans (IDE 7.4).
The program has to follow these instructions (ignore the Linux part of the instructions, the rest is in bold):
Write a program on the Linux system using the putty utility. The program should get strings of data from the command line (that is, look for the data in the "args" array of strings). Use a loop to convert each of the strings in the array into a double and add the number to a total. Print the total after all of the strings have been processed.
The program will use try-catch to catch any error that occurs. If an error occurs, the program will print a message saying that the error occurred. The program can end at that point.
You should create the Java program using the nano editor. The input data should be a list of numbers on the line that runs the program.
The problem so far is that I keep getting an error when converting a String value into a new double value. I have yet to code the try-catch method in my program
Java Code:
import java.util.*;
public class Program13Strings {
public static void main(String[] args) {
Scanner scan = new Scanner (System.in);
System.out.println("How many lines of data do you wish to enter?");
int size = scan.nextInt();
[Code] ....
*NOTE: right where my code says double newDouble = Double.valueOf(newResponse); is where the error is occurring.
*ERROR: Exception in thread "main" java.lang.NumberFormatException: For input string: "abc"
at sun.misc.FloatingDecimal.readJavaFormatString(Floa tingDecimal.java:1241)
at java.lang.Double.valueOf(Double.java:504)
at program13strings.Program13Strings.main(Program13St rings.java:21)
Java Result: 1
How can this be fixed so I don't get this error?
import java.io.*;
class Binary_Displaying
{
public static void main(String args[])throws IOException
{
BufferedReader br=new BufferedReader(new InputStreamReader(System.in));
int d,r,bi=0,i=0,dup;
[Code] ....
I am not getting any output.........
Write a java program that will ask a user to input grades until the user inputs the sentinel value -1. The program should test each input to determine whether 0<=grade<=100. If the grade entered is within this range, the program should print "Grade accepted;" if not, the program should print "Invalid input".
View Replies View RelatedI have been struggling with this program for weeks. This program is supposed to take a user's inputted odd number and then print out all prime numbers lower than that number.
public class PrimeNumber
{
Scanner scan = new Scanner(System.in);
int userNum;
String neg;
public void getUserNum()
[code]...
I am new to java programming and using bluej for programming and i have tried this question what i have have given in title ... How to do the following question without using strings.
Write a java program to input a binary value and convert it into decimal and Vice Versa. Without using String. Please make it for blue j format.
I'm trying to do a user validation loop that runs until the user enters a valid binary, q, or Q. I think the rest of my program should work as intended, but here is the areas of concern:
public static boolean isBinary(String num) //Check if the entry is binary
{
for(int i = 0; i < num.length(); i++) {
if(num.charAt(i) != 0 || num.charAt(i) != 1){
return false;
[Code] .....
The program runs without errors otherwise.
I have to ask how many children's tickets you want to order. When I apply the code below, it just accepts whatever I input, including letters. I imagine it is to do with setting childrensTickets = 0? If I input a letter using the below it accepts - shouldn't it print the error given the input is not >=0?
System.out.print("How many children's tickets do you require? ");
int childrensTickets = 0;
boolean validChildrenValue = false;
while (validChildrenValue == false) {
if(aScanner.hasNextInt()) {
[Code] ....
I have a program in which I take some characters input from User
using
String inputString=in.next();
How can i restrict user that input should be only char 0 or 1?
If the answer is regular expressions then What Should be Its Regular expressions?