Declare And Creates Integer Array That Can Hold 15 Integers
Nov 3, 2014
The main Method
-Create a main method declares and creates an integer array called nums that can hold 15 integers.
-Use a for loop to fill that array with multiples of 3: 0, 3, 6, 9, etc.
-Then use similar for loop to print each value in the array on one line, with each value separated by a single space.
-Compile and run the program to see the result:0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
As you write other methods, you'll also modify the main method to make calls to them. The printArray MethodWrite a method called printArray that accepts an integer array as a parameter. This method does not return a value, and must be declared as static so that the main method can call it. Instead of printing the array in the main method, move that loop into this method. Call the printArray method from the main method. Compile and run the program to verify it prints the sam result as before.Add a println statement so that after printing the array values on one line, it then moves to the following line.Finally, modify the loop in the printArray method so that, instead of using a traditional for loop, it instead uses a for-each loop. Compile and run the program again.
Part III: More Array Methods
The linearSearch Method In lecture we looked at a method that performed a binary search on a sorted array. A much simpler (though much less efficient) search is a linear search, that simply starts at the front of the array and looks at each element in turn until it finds it or reaches the end.Create a method called linearSearch that accepts an integer array and a single int value as parameters. The goal of the method is to find the second parameter (the target) in the array. The method should return a single int representing the index of the target value. This method should not print any output itself. In this method, use a traditional for loop to scan through the elements in the array. As soon as you find the target value, return the index of that value.
If you scan through the entire array without finding the target value, return a -1.Modify the main method to call the linearSearch method and print the results. Call it twice, searching for the value 18 (which it should find) and the value 10 (which it should not). Including the previous activity, the output of the main method should now look similar to this:0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
The index of 18 is 6
The index of 10 is -1
The sumArray Method
The sumArray method should take an integer array as a parameter and return a single integer representing the sum of all values in that array.Use a for-each loop to access each value in the array and compute a running sum. After the loop, return the total.Call the method from the main method, producing the following augmented output:0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
The index of 18 is 6
The index of 10 is -1
The sum of this array is 315
The addValue Method...The addValue method should accept an integer array and a single int as parameters. The purpose of the method is to add the second parameter to EACH value in the array. The addValue method does not return a value, but the elements inside the array will be modified. Call the addValue method from the main method, adding 100 to each element in the array. Then call the printArray method again to see the modified array values:0 3 6 9 12 15 18 21 24 27 30 33 36 39 42
The index of 18 is 6
The index of 10 is -1
The sum of this array is 315 100 103 106 109 112 115 118 121 124 127 130 133 136 139 142
Test a Different Array..Finally, duplicate the content of the main method to perform similar tests on another array. Instead of filling it with multiples of 3, fill it with multiples of 4. And instead of using an array size of 15, use an array size of 20.Modify the values search for to include one that is in the array and one that isn't.Rerun the main method and carefully check the results.If you haven't been doing it all along (which you should), make sure the appropriate class and method documentation is included.When you're satisfied that all methods are working correctly, modify the main method to delete the second array tests.
Write a function that accepts an array of non-negative integers and returns the second largest integer in the array.
Return -1 if there is no second largest.
The signature of the function is int f(int[ ] a)
Examples:
if the input array isreturn{1, 2, 3, 4}3{{4, 1, 2, 3}}3{1, 1, 2, 2}1{1, 1}-1{1}-1{}-1
In the signature what I understood is, I should write my function with the given signature,
The return type is "int"
method name is "f"
parameter is "a" right ?
Writing my doubts beside the particular line in the code
public static void main() // In the answer why they didn't use the class ?
In main method why they didn't use parameters ?(String[] args)
{ a1(new int[]{1, 2, 3, 4}); // what is "a1" here is it array name ? this line initializing the array ? a1(new int[]{4, 1, 2, 3}); a1(new int[]{1, 1, 2, 2}); a1(new int[]{1, 1}); a1(new int[]{1}); a1(new int[]{}); }
static int a1(int[] a) // what is "a" here parameter ? and "a1" is method name ? why they used the array name and method name same ?
{ int max1 = -1; int max2 = -1; for (int i=0; i<a.length; i++)
I have a problem where I have to create random integers from 1 to n + 1. When the array is displayed I have to find the missing integer from the values that are displayed and show that value. I have to use O(n^2) and O(n) operations. I have created this code so far but I cannot figure out how to make my values display n + 1. It is only displaying values 1, 2, 3, 4 and 5 in random order. I also cannot figure out how to find the missing value. I have created a boolean displayed statement but can't determine how to use it in this code.
=Java import java.util.Random; public class Task6 { public static void main(String[] args) { int[] numbers = new int[7]; //create array of numbers Random random = new Random(); boolean displayed = false; //boolean value to determine if number was displayed
So I wrote a method that simply calculates the sum of all integers between 1 and a given integer n. The method works fine however, as n gets big the solution will have time and space problems. Some I'm just curious if there is a better method than my iterative one that would produce a better Big O value.
public static int sum(int n) { int total = 0; for (int i = 1; i <=n; i++) total += i; return total; }
Working on a program that creates an array from a file, organizes it in various ways, and then prints the results. Right now I'm specifically having trouble with the printAry() method - when I try to run it, I receive a NullPointerException for the active line in printAry() (EDIT: line 102). Not sure which sections are important to this, so I will include the client class and most of the service. I realize that the amount of documentation I included is not necessary, but it is required for the class.
class Lab3StudentAryService { private int count; private Lab3StudentData [] studentAry = new Lab3StudentData[50];
/* @param: none @return: none reads file and converts to array. */ public void fillAry() //constructor { Scanner scan = new Scanner(System.in);
So I want to write a constructor that creates a new object with the data from the array values. I don't know where to start. It's the last method in the code:
public class Measurements { private double[] values; private double[] newArray; private int n; //numberofvalues private double[] ms; public Measurements(int max) { //constructor
I have the following program. In a nutshell, I creates an array of 3 consecutive ints and the user has to guess what those numbers are, knowing that they are between 0 and 7, this is from Head First Java. In the book, the code has a bug that is made on purpose and they challenge you to fix it. As you can see bellow, every time a user's guess matches a int in the array, the NumOfHits is increased by one. When the NumOfHits is 3 (the length of the array) the game finishes.
The bug is that if you guess 1 and 1 is in the array, if you type in 1, 3 times, I will increase the NumOfHits 3 times and end the game as if you had won. To solve the bug, you need to find a way to tell the program that if the user already guessed that number, it should no longer be taken into account and we shouldn't increase the NumOfHits if the same number is provided.
I "fixed" this by searching for the index of the number that matches an int of the array, and changing that index's value to 100, since the user knows that the numbers are between 0 and 7, they will not submit 100.
The result? If the user submits 2 and 2 is in the array, the value of its indexed is replaced by 100, so that if the user submits 2 again it doesn't count as a match.
Please see the comments in the code
import java.io.*; import java.util.Arrays;
class DotCom{ int NumOfHits = 0; int[] LocationCells; public void setLocationCells(int[] locs){ LocationCells = locs;
[Code] .....
The code works, but for some reason, some times I get a ArrayIndexOutOfBoundsException run time error and it appears to be somehow random. This is what I saw on the command line earlier
C:Userspablo.alvarez>java launchDotCom
Enter a number: 3 missed Enter a number: 4 hit Enter a number: 5 hit Enter a number: 7 missed Enter a number: 5 missed Enter a number: 4 missed Enter a number: 3 missed Enter a number: 4 missed Enter a number: 5 missed Enter a number: 6
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: -1 at DotCom.checkYourSelf(launchDotCom.java:16) at DotComGame.startGame(launchDotCom.java:59) at launchDotCom.main(launchDotCom.java:72)
As you can see here, 3 returned 'missed' but 4 and 5 returned hit. Since the numbers are in sequence and are only 3, it makes sense that the last number is 6 (4,5,6). You will then notice that when I submitted 3 and 4 again it returned 'missed' as expected, because the numbers were already matched earlier, but then when I submitted 6, it returned the error seen above.
Sometimes this doesn't happen at all, sometimes it happens at the 2nd guess or third, it appears to be somehow random. I'm familiar with the error message, but I don't see where I'm using an index that doesn't exist in the array. The only time I'm referencing an array index is on
LocationCells[index] = 100;
but the index variable will only hold a value if the int submitted by the user matches on of the values in one of the indexes, so how is it that I'm going over the number of available indexes?
How do I code this without having the need to use iterator? Code a Java method that accepts an ArrayList of integers and an integer. The method should delete all elements in the array list exactly divisible by the integer and return the number of remaining elements.
I have a jtable which i want to put an array into... and Really don't know how.. I dont want to use array list mainly because it looks way to complicated so there must be some other way using defaultablemodel but i dont know how..
So here's my code: just a snippet which includes the testing of the jtable
I want to declare a 2 dimensional array in java which has 3 column and unlimited number of rows, i want to give a special name to each column . The type of first column is string second one is int and the last one is string
Column1_name Column2_name Column3_name String value Int value String value . . . . . .
Still trying to get a handle on arrays! So, I declare an array to be a 46x1 and I am trying to populate it with a Log formula that I am using but I keep getting an ArrayIndexOutofBoundsException.
Code :
private double[][] LNValues = new double[46][1]; //Calculating y=LN(E-k) and Initializing the Array for(int x=0; x<LNValues.length; x++) { double i = Math.log(eValues[x][1] - kValue); if(i > 0)
Write a method maxOccurrences that accepts a list of integers as a parameter and returns the number of times the most frequently occurring integer (the “mode”) occurs in the list. Solve this problem using a map as auxiliary storage.
So I need to generate 10 random integers in the range 1-20 but i have to store them in an array called numbers. Then I have to call a method called displayArray which displays the contents of the array and for the assignment i have to use a for loop to traverse the array. The method header for the displayArray method is:
public static void displayArray(int[] array)
This is what I have done
public class RandomIntegers { static int numbers = 0; public static void displayArray(int[] array) { System.out.println(numbers + "Numbers Generated");
I have double checked this code over and over and I just can't find the problem.
What I'm trying to do is take a file and input it into an 2D array.
Ultimately, I should convert the array of integers to an array of characters, then print it out. The file contains a set of ASCII values.
After printing it out, I should then create methods to manipulate the image produced.
Using 2D arrays is a requirement for this exercise.
I think that somehow I'm overcomplicating this and the solution is a lot more simple than I think, but I can't think of what to change.
The error I am getting is:
Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 40 at main.main(main.java:17)
Java Code:
import java.util.*; import java.io.*; public class main { public static void main(String[] args) throws FileNotFoundException { String[][] data = new String[22][40];
import java.util.ArrayList; import java.util.Arrays; import java.util.List; public class array { public static void main(String[] args)
[Code] ...
Is there a way to write this, where, alpha is one array.
Write a program that declares an array "alpha" of 50 elements of type "double". Initialize the array so that the first 25 elements are equal to the square of the index variable and the last 25 elements are equal to three times the index variable. Output the array so that 10 elements per line are printed.
If I have an array of 50 integers, can I break that to read in lines of 10?
I have a quick polymorphism question. I have a parent class and a sub class that extends the parent class. I then declare an array of parent class but instantiate an index to the sub class using polymorphism. Do I have to have all the same methods in the child class that I do in the parent class? Here is an example of what I mean.
public class ParentClass { public ParentClass(....){ } public String doSomething(){ } } public class ChildClass extends ParentClass { public ChildClass(....)
[Code] ....
Is polymorphism similar to interfaces where the child class needs all the same methods?
import java.util.Arrays; import javax.swing.JOptionPane; public class Student { public static void main(String args[]) { String [] A =new String [4]; //krijon tabelen e emrave
[Code] ....
It Prints [firstname,secondname,thirdname,fourthname]
and [0,0,7,9]
The problem is that the first 2 integers of the second array are always 0 even if i put another grade like for example 6 or 7...
Our teacher asked to input the names and grades of the students using JOptionPane and then find the MINIMUM grade and how many times this grade is repeated...
I am trying to write a method that returns the busiest hour in a logAnalyzer class that read web server data and analyze hourly access patterns and stores them in an array. My problem is, in order to get the busiest hour, I need to go through the hourCounts array to find the element with the biggest count.
I have a method that receives an array of integers and saves the ID of the user inside the array of integers and I keep getting the error: "int[] cannot be converted to int".Here is the code:
public boolean Borrow (String TitleOrAuthor,int id){ int count = 0; int b1 = 0; int BookCount [] = new int [b1]; for (int i=0;i<Bcount;i++){ if(Booklist[i].getTitle().equals(TitleOrAuthor)) for(int j=0;j<b1;j++){ BookCount [j]= Booklist[i].getCopies(); BookCount [j]= id; b1++;
I am workinh with a couple of functions that deal with two dimensional (square) arrays of integers, doing things like checking equality, etc. For example, I know that I get an ArrayOutOfBoundsException in the isEqual function, but I don't know why.
public class MatrixUtils { //This function checks if two matrices are equal public static boolean isEqual(int A[][], int B[][]) { for(int i=0; i<A.length; i++) { for(int j=0; j<A.length; i++) { if (A[i][j] != B[i][j]) return false;
What the fastest way to sort an array of random integers. My instructor told me to look into an algorithm that uses 2n, but that is all he gave me. I am unable to find anything of the sort (pun intended there) on google, in my text, in my other java books or on here. The only thing that I have come up with are things like mergesort with the exception that the indicies of the Array have to be even. The program that I'm writing takes user input for a minimum to maximum range, the amount of numbers to fill the array in that range, and verbose.
I've tried bubbleSort but it takes forever to sort under the conditions below. I have seen a sorting algorithm that uses n (log n) but didn't really understand how that one worked.
Using the 2n algorithm, I should be able to test the range from 1 - 1000 and have it populate an array of of 1,000,000 random integers. It should be able to complete in a matter of miliseconds.
This code is designed to interpret an array of integers and rearrange it so that the even numbers come before the odd. But it fails when I run it against my test?
public void evensLeft(int[] array) { int myFun[] = new int[array.length]; int k = 0; for (int i = 0; array.length-1 > i; i ++) { if (array[i]%2==0) { myFun[k] = array[i]; k++;
How can I access the index of one character array and store those indexes into another array? I need this array of indices so as to perform an addition with another array.
Suppose I have a char array that stores all the letters of the alphabet (say alpha) and I have an another char array (say letter) that contains some letters in it. I want to retrieve those letters from the "letter" array and check its index in the "alpha" array and store that index into another integer array.
I am trying to create a method that takes an array of integers and prints it out using System.out.print. I'm having trouble creating the right way to print it out since I cannot find a way to convert the int array to a string to print it out.
public static String printArray(int[] num){ for (int i=0; i<num.length;i++){ String msg = num[i]; } return System.out.print(msg + " "); }