The gist of it is to create a very basic memory game. There are 12 buttons, each associated with an icon. Every button that you click will display the icon and will stay there until clicked again. I got the bulk of it taken care of, but my issue lies with switching the icons back and forth. I can get them to display one at a time, but when I click on a new button, all the icons except the button I just clicked don't display. Essentially, only one shows up at a time.
I am new to JSF, trying to customize the primefaces picklist, I want to update the picklist Source List dynamically on certain events like onclick or change?
I tried to write an Listener and populate the dualModel, the call is going to the method and List is getting updated but in UI, the old list is only maintained . I have also asked this question in stackoverflow ,
Refer this link for further details : stackoverflow [URL] .....
I have a Jtable which shows contents on each row. but the row contents which are bigger than the width of the column gets shown as "BlahBlah.." (basically getting showed up as .. in the end)
User has to manually increase the width of the column to see those extra contents.For e.g if the row contents are ABCDEFGHI and the widht of the column for that row is sufficient enough to show only ABCDEF of that, then it will show up as something like "ABCD.."Now my requirement is to show the complete contents over to next column on the same row.
Note: I could simply add the code to show the widht of the column to adjust according to largest row content for that column . But unfortunately this is not what is required.
What would be the simplest way of creating a Dialog that can add TextField dynamically based on whether a radio button option from the dialog box is selected. I thought of JOptionPane.showMessageDialog and adding a JComponent though I would not be able to add a TextField on the fly and I would not be able to add ActionListeners. The dialog would initially contain some radio buttons, labels and textfields.
i have two classes, one is a GUI program and the other is an index writer program. the GUI program uses a j file chooser to select directories and display them in the text fields.the index writer is supposed to take the directories in the text fields and read from one(document location) and write into the other(index location) i want to run the index writer program by the click of a button(indexfbuton) in the gui programi have been able to get the directories to display in the text field but when i click the button to run the index writer class, nothing happens..here is the GUI class
I have been trying to develop a small desktop application. I have JFrame and a button. When I click the button, the app is supposed to save record to database. But it is impossible to click the botton twice. To explain in detail: when a user fill in the form and click the button, the app will warn the user if he/she haven't fill in the appropriate JTextFields. After warning it is impossible to click the button again. I mean after first click, the button is busy and impossible to click.
i want to make adding into mysql database and then when i click adds, jtable show those data automatically. but it seem to get error at display part, it shows " Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: Uncompilable source code - illegal start of expression" and jtable do not show the added data but in mysql, data is properly kept.
private void jtPropertyChange(java.beans.PropertyChangeEvent evt) { DefaultTableModel model = (DefaultTableModel) jt.getModel(); try { Class.forName("com.mysql.jdbc.Driver"); con = DriverManager.getConnection(url, user, password); String sql = "SELECT * FROM `companya`";
All the entries in the table are of type String.However, the String content for the “Head4” column can be very larger and displaying this makes the table very large.As an alternative, is there a way to provide a button for the “Head4” for each row and when the user selects the button on that row, the corresponding “Head4” column contents is displayed in a pop up dialog box ? I am using Primefaces 5.0.
I am working on web project in java. i have taken buttons in column..and projects is my column..when i click on a button in first row ,i want fetch all information about selected project....so how can i do that?
I have a textbox called "answer" and 10 different buttons on a form. Now what i would like to do is click the button and have the Button Text in the textbox with the already present text.
So if i click the button 1 it should automatically recognize the clicked button and have its text copied to textbox.
I know the '.get' method but lets say i have 100 buttons so i cant repeat it for every single one of them.
I'm using java FX-8 and JDK 1.8,Netbeans 8.0.2.I want to open pdf on button click in my JavaFXML Application.I have triued pdf viewer plugins and iText but it doesn;t work.I have to pass variable value in pdf too.
how I would achieve the concept of saving the contents of a JTable, so even after program restarts, the table would retain the data. I am developing a utility that will be a password storage book. The user enters passwords and they are stored in a JTable. Currently, the table resets whenever the program is restarted, however I would like it to keep it's data. URL....
I know how to do single selection, but I would like to do multiple row selection only by using CTRL + click without the option of dragging the mouse to select rows. So the user would have to hit ctrl + click each time to highlight additional rows.
I have buttons created on a frame and then I register the listener from a controller in a controller-view relationship.
When I click the button on the face, the action never executes for some reason. I thought maybe there was a problem registering the listener but I can call the buttons doclick() method and it executes as it should. Perhaps I'm overlooking something really obvious here but I can't see it.
again, when i click the button nothing happens. but if i add the following code
btnEight.doclick()
the actionPerformed invokes in theController as I intended.
You can see the entire project on GitHub so you can see the full context. The controller class contains the listener and the view class contains the buttons.
I've recently decided to learn Java on my own using internet material such as forums, blogs and you tube. Ive never programed before but through some research I concluded that Java is going to be on the mid spectrum of difficulty as far as verbiage goes. I ma in no way implying that Java is easy but instead closer to spoken English that c++ if my research is correct. So here is my attempt at a basic program where I click a button and it will make an image appear. Not sure where Im falling short
package clicktoimage; import java.awt.*; import java.awt.event.*; import javax.swing.*; public class Clicktoimage extends JFrame { private JLabel label; private ImageIcon image;
Projectsrccom.mypackageMyClass.java resourcesicon.pngmyexe.exe Right now I have to run the exe like this : - It has hardcoded the path of the exe :command = "cmd /c start /b cmd.exe /K "cd " + outputFolderPath + " && C:myfoldermyexe.exe " + "param1=value1 param2=value2 " ;
Process p = Runtime.getRuntime().exec(command); This works fine. But, When I package it as a jar I want to give a relative path to my resources folder. How can I make this happen?
I tried:File f = new File("resources/myexe.exe"); String path = f.getAbsolutePath(); but this "path" did not work.
Another way would be to extract the exe to a local path on the server, but there is a possibility that I could face permission issues.
I read the oracle doc example, i understand the concept but still nothing is happening on show,first ,next method of CardLayout in ActionPerformed. Code is highlighted where I am facing problem.
I want to switch panel on click of a button and code for switching panels is written in update method (Which gets called from notify observer of another class as part of Observer pattern.
playGame in Panel 1 of class 1 calls another class (class 2)and data comes in update method of class 1(Observer interface).
Now for switching panels code is in gameControllerDataProcessing . I am not able to switch the panels when this functionality runs.
However if i dont call the unoGameController.playGame(playerFirst.getText(), playerSecond.getText() and directly call the update method or directly write the switching panel code . then it works fine.
In my application, some text should be added to a text area in response to a click on a button. So as an action listener to this class, I made another class which implements the ActionListener.
Inside this class, I have obtained the text which I want to be added to the text area. But the text area is in another class and for the action listener I wrote another class.
Now the problem is that when I try to add the text to the text area by the following line of code, it says that textArea_1 can not be resolved or is not a field.
Java Code:
ParentPanel.textArea_1.setText("Name:"+ncrarray[0]+" Code:"+ncrarray[1]+" Rank:"+ncrarray[2]); mh_sh_highlight_all('java'); What should I do about it?
Even if I try to write a method like the following in the class in which the text area is created, it gives the same error.
Java Code:
public void printTextArea(String text) { textArea_1.setText(text); } mh_sh_highlight_all('java');
The text area is present inside a constructor of the class. I am writing the method outside the constructor (ofcourse).