ex
Sample input:2340980
Sample Output:23498
this is the program i have tried but is dosent work
import java.util.*;
class zero
{
public static void main(String args[])
{
[Code]....
I'm having a hard time with this problem, this is what I have, but I can not use two integers, I have to use one integer and a string...
This is the question:
Write a method called printStrings that accepts a String and a number of repetitions as parameters and prints that String the given number of times. For example, the call:
printStrings("abc", 5);
will print the following output: abcabcabcabcabc
This is what I attempted:
public class printStringsproject {
public static void printStrings(int abc, int number) {
for (int i = 1; i <= number; i++) {
System.out.print("abc");
}
}
public static void main(String[] args) {
printStrings(1, 5);
}
}
Ask the user to enter a sequence of at most 20 nonnegative integers. Your program should have a loop that reads the integers into an array and stops when a negative is entered (the negative number should not be stored). Invoke the average method to find the average of the integers in the array (send the array as the parameter).
how can I remove the negative number from the array and calculate the average of the posive elements without the negative ones? This is my code so far...
import java.util.Scanner;
import javax.swing.JApplet;
public class Parameters
{
//-------------------------------------
//Calls the average and minimum methods
//with different numbers of parameters
[code]....
I am trying to write a program that asks the user to enter a number from 1 through 10 and then the program will display the roman numeral for that number.
I am also adding a error message in which i haven't yet because im still trying to figure out how to the program will do the roman numeral.'
I have used the if and else if. but when i input a number it just repeats the number back to me.
The program cimpiles but it doesn't do what i want. here is what i have so far. how can i get the program to display the roman numeral after the number is entered.
import javax.swing.JOptionPane;
public class Romannumeral
{
public static void main(String[] args)
{
double number;
[Code] .....
I have a beginning Java Program I have been working on that creates a number guessing program where the computer guesses a number that the user is thinking of within a certain range. I so far have the program below, but need getting rid of a few kinks/ adding features.
-First, I need to set it up so that the user will be prompted and give a range. It should run and produce something like this:
Welcome to this first-ever mind-guessing program!
Please pick a range (higher than 1 and no larger than 50): 32
You will choose a number between 1 and 32... and I will try to guess it.
With each of my guess, you will tell me whether I am too high (h or H), too low (l or L), match (m or M), or you want to quit (q or Q). My objective is to find the number using as few guesses as possible.
-Second, the game is supposed to give up and restart after failing the five, guesses, but for some reason, after it fails the fifth time, it prompts a fifth guess once again instead, then restarts after- I need to prevent this, so that it should look something like this:
My fourth guess is 17: h
My guess is too high?
My fifth guess is 16: h
*** I am unlucky this round. I give up.
Let's play!
My first guess is 10:
etc..
import java.util.*;
import java.lang.Math;
public class numguessprac1 {
// Declaring variables
public static String input;
public static int quit;
public static int guess;
public static int wins;
[Code] ....
trying to write a program that takes a user inputted number and converts it to a binary number.
Here's what I have:
package com.java2novice.algos;
import java.util.Scanner;
public class Converter {
static Scanner console = new Scanner(System.in);
public void printBinaryFormat(int number){
int binary = console.nextInt();
[Code]...
Bugs on:
Line 13
Line 17
Line 23
Write a method maxOccurrences that accepts a list of integers as a parameter and returns the number of times the most frequently occurring integer (the “mode”) occurs in the list. Solve this problem using a map as auxiliary storage.
If the list is empty, return 0.
Write a program that accepts the line number from the user and prints only that particular line from the Floyd triangle.
Example:
Input: 2
Output: 2 3
Input: 3
Output: 4 5 6
Write a menu driven program that either accepts words and their meanings, or displays the list of words in lexicographical order (i.e. as in a dictionary). When an entry is to be added to the dictionary you must first enter the word as one string, and then enter the meaning as separate string. Another requirement - from time to time words become obsolete. When this happens, such word must be removed from the dictionary.
Use the JOptionPane class to enter the information.
Use the concept of linked list to carryout this exercise. You will need at minimum the following classes:
- A WordMeaning class that hold the name of a word and its meaning.
- A WordMeaningNode class that creates the node of information and its link field.
- A WordList class that creates and maintain a linked list of words and their meanings.
- A Dictionary class that test your classes.
For the output, the program should produce two scrollable lists:
- The current list of words and their meanings.
- The list of the deleted words. You need not list the meanings, just the words.
So far, I have everything coded except for the remove method, and I am not sure how to code that. I coded the add method already, but now I don't know where to begin with the remove method in my WordList class. My classes are below.
WordMeaning Class:
public class WordMeaning {
String name;
String definition;
WordMeaning(String t, String d) {
name = t;
definition = d;
[Code] .....
Write a program that will display all the odd number between 1 and 15. here is the code that i use :
Scanner scan = new Scanner (System.in);
int i, num=0, count_odd = 0;
for(i=1; i<=15; i++) {
System.out.println("please enter number ");
num = scan.nextInt();
[Code] ....
I need the output to display like this:
At Billy Goat's Restaurant, the price of our good tasting Hotdog is $1.50.
But it is output display is like this:
At Billy Goat's Restaurant, the price of our good tasting Hotdogis 1.5
In the second array i use a double, is that not correct?
import java.util.Scanner;
public class FinalProject
{
public static void main(String[] args)
{
String[] FoodDescription = {"Hotdog", "Fries", "Hamburger", "Pepsi", "IceCream"};
double [] cost = {1.50,.80,2.25,1.00,.75};
[Code] ....
The code below is just the GUI for a slot machine. Currently when play is clicked it displays the random number, I'm trying to make it so each random number displays an image in the GUI instead. For example if the random numbers were 2,2,3 it would display Cherry, Cherry, Bells. I started changing field1 to the image but realised I was on the wrong track as it would just display the same image not one allocated to a number. I've left in what I started doing.
how to do it?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class SlotMachineGUI {
JPanel mainPanel;
SlotMachine slotEngine;
[code]....
Aim : display a serial number using two thread Say (odd numbers)t1=1,3,5,7....99, and (even no) t2=2,4,6,8......100
How to resolve this problem ?
output will be:
1
2
3
:
100
tfrreee i want to display given series in ascending order in java prog here is an error : E:Javajdkin>java ascend 505671Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 7 at ascend.main(ascend.java:9)
Java Code:
class ascend
{
public static void main (String args[])
{
int s[]={ 50,71,81,21,7};
int i;
for(i=0;i<=s.length;i++)
[Code]...
I'm trying to output a ten digit phone number as a string on one file, and write another program to write it as a long because I don't know what value I need to use in order to get the code to run properly on either one.
View Replies View RelatedI've chosen to build a GUI that will initially display a window with 'x' number of buttons for different subject areas of physics (kinematics, waves, sound, circuits...etc). I would like to use an Actionlistener for each button so that when its pressed, the JFrame will extend a sidepanel or expand the JFrame with a new JPanel that contains variable Jtextfields so the user can enter data to calculate.
I'd like to know if its possible to do this with the JFrame or should I just open a new window altogether? I have some other features I plan to add to the program, but this is where I am right now.
how difficult is it to add a banner image and imageIcon? By banner image I mean create a Jpanel that will contain a header for the window and will have some cool physics jpg image.
I am working with a program I wrote for class. I got it to compile and do what I want, But I was wondering how I can format my methods to to display a decimal with 1-2 decimal places. Would I create a method in my NumberAnalysis class to do it for me? Or would I declare an instance of the DecimalFormat class in my main method?
import java.util.Scanner; //Needed for Scanner Class
import java.io.*; //Need for File and IOException
import java.text.DecimalFormat;
public class Ex8_11 {
public static void main(String[] args) throws IOException{
{
DecimalFormat decformatter = new DecimalFormat("#0.00");
[Code] .....
This is my output:
Lowest Number: 1.09
Highest Number: 82.76
Total Number: 367.89000000000004
Total Average Number: 30.657500000000002
Think I just solved the answer to my own question, I did it by declaring double variables in my main method and called the methods and instantiated the variables into the methods... Is there a better way to do this?
package lesson4.skowronek;
import java.util.Scanner; //Needed for Scanner Class
import java.io.*; //Need for File and IOException
import java.text.DecimalFormat;
public class Ex8_11 {
public static void main(String[] args) throws IOException{
[Code] ....
I have returned with yet another problem but I think this one might be a bit easier to fix.
So the whole MO of this program is to take user input, and display the sum of the digits of the number they entered. I am supposed to do this by utilizing methods. So far this is what I have and when I compile it tells me that it "cannot find symbol", which I don't understand as I define what "m" is in the for loop. The other error is that it says:
"Exercise6_2.java:22: error: incompatible types: possible lossy conversion from long to int
return result;
^
I don't understand why it's giving me this error nor do I understand why result seems to inherently be an int. (Also the public static int sumDigits(long n) method was given to me by the book so that is what I am supposed to use).
import java.util.Scanner;
public class Exercise6_2 {
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.println("Enter a integer");
long n = input.nextLong();
[Code]...
I am new to java programming and using bluej for programming and i have tried this question what i have have given in title ... how to find out the errors in the following program:-
class Primedig {
public void getinput(int n) {
int ctr=0;
while(n!=0) {
int r=n%10;
for(int i=1;i<=r;i++)
[code] .....
output:-
For example input is 243 the output comes only 3 not 2& 3 both.
I have been working on this for hours and cannot get it to work properly. The program is to count the number of characters contained in both strings and display the results. It is also to display the final statement, but only once. This version has a complete statement for each matching character.
import java.util.Scanner;
public class CountMatches {
public static void main(String[] args) {
String firstStr = ("");
String s1 = firstStr;
[Code] ....
Write a program using a while-loop (and a for-loop) that asks the user to enter a string, and then asks the user to enter a character. The program should count and display the number of times that the specified character appears in the string. (So, you will have two separate program codes, one using a while-loop and the other one using a for-loop.)
Example:
Enter a string: "Hello, JAVA is my favorite programming language."
Enter a character: e
The number of times the specified character appears in the string: 3
I don't even know where to begin I've only got this
import java.util.Scanner;
public class letterCounter {
public static void main(String [] args) {
Scanner sc = new Scanner(System.in);
System.out.println("Enter a string");
String myString = sc.nextLine();
System.out.println("Enter a letter");
String letter = sc.nextLine();
}
}
I have to store the name SD array and display the room and floor no. whose name is entered but i am having a problem with the logic part. The answer is coming to be wrong
import java .io.*;
class hotel
{
public static void main()throws IOException {
InputStreamReader read = new InputStreamReader(System.in);
BufferedReader br = new BufferedReader(read);
String ar[][] = new String[5][10];
[Code] ....
JOptionPane.showMessageDialog(null,myRoster.totalGoalsScored + " is the total number of goals scored by all the players on the roster");
HOW CAN I CALL THE METHOD totalGoalsScored and display it using JOptionPane
ERROR: CAN NOT FIND SYMBOL
So I am currently writing my first assignment and have run into problems with my coding. The task was to have someone enter a 5 digit number and in return, I list each number on their respective lines. We also must create an error if a number other than 5 digits was entered. My problem is that when they enter a 1 or 2,3,4,6,7,8 digit number.. the error message occurs along with the rest of the messages (listing the numbers, etc). I want the program to end (or even re-ask to enter the numbers) if they incorrectly enter the data.
View Replies View RelatedIn a forest, there are some bamboo trees .The length of each tree get doubled during winter and increases by one unit in summer , write a Java program to calculate the total length of n number of bamboo trees in M number of seasons. The season always starts with winter.
import java.util.Scanner;
public class Tree {
public static void main(String args[]) {
int length;
int season;
[Code] ....
We have triangle made of blocks. The topmost row has 1 block, the next row down has 2 blocks, the next row has 3 blocks, and so on. Compute recursively (no loops or multiplication) the total number of blocks in such a triangle with the given number of rows.
triangle(0) → 0
triangle(1) → 1
triangle(2) → 3