Read A File And Then Output Back To Same File On New Line
Jan 24, 2015
I am trying to write to a file but everything I have tried doesn't seem to work. What I want to do is read a file and then output back to the same file on a new line. The text file contains the sentence "Java is a programming language".
import java.util.Scanner;
import java.io.*;
class HW1B {
public static void main(String[] args) {
Scanner fileIn = null;
try {
fileIn = new Scanner (new FileInputStream("text.txt"));
[Code] ....
These are the errors :
HW1B.java:19: error: no suitable constructor found for Scanner(FileOutputStream)
fileOut = new Scanner (new FileOutputStream("text.txt"));
^
constructor Scanner.Scanner(Readable) is not applicable
(argument mismatch; FileOutputStream cannot be converted to Readable)
constructor Scanner.Scanner(InputStream) is not applicable
[Code] ....
Note: Some messages have been simplified; recompile with -Xdiags:verbose to get full output
2 errors
01. pickup the selected text file and read the line by line and output the text in to visual text pane.
what i did:.
01. I wrote code that read the text file and output in to jave console/ also some of the interface.
the code read txt file:
Java Code:
String fileName = "C:/Users/lakshan/Desktop/lawyer.txt"; File textFile = new File(fileName); Scanner in = new Scanner (textFile); while(in.hasNextLine()){
[code]....
so it will read any text file dynamically and output to the text pane in interface. I think scanner code must be execute after the select the file from the browser and set the scanned result in to variable. then later out put the var as string in some jswing component?
I am trying to read a file and input each line of the file into an array. I have not set the array size as I was hoping to fill the array using a while loop. Unfortunately the scope of the array does to work inside the while loop so I am being told that the array 'students' has not been initialised even though it has just outside of the while loop. Is it possible to do what I am trying to without having the array initialised in the while loop as surely the array will be reset every time if it was in the while loop? Here is my code:
public static void students(String file) throws FileNotFoundException { try { File studentInfo = new File(file); Scanner input = new Scanner(studentInfo); String[] students;
Well my code is supposed to ask for an input file and then (ex: input.txt), read the input file and create an output.txt file with the anagram for the words in the file. Also it should be displayed on the screen. However my code doesn't display the anagram on screen or the output file!
/* This program will read a file given by the user, read the words within the file and determine anagrams of the given words. If the file that the user inputs is empty, then the program will output "The input file is empty." * The program will read the file line by line, counting the total number of words read. If there are more than 50 words, "There are more than 50 words." * will be printed, and the program will terminate. After each line is read, the words in the line will be separated,punctuation characters will be removed, and upper case characters will be switched to lower case. * If any word is larger than 12 characters, that word will not be considered in the total amount of words in the file and it will not be sorted. * After each word is read, the letters will be sorted and stored into an array containing each * word's 'signature'. After all the words have been read, words will be printed to the output file on the same line based upon their signature. */
public class Anagram { //Creating constants for maximum words in file and maximum chars in word public static final int MAX_CHARS = 12; public static final int MAX_WORDS = 50;
I am trying to remove a line based on user input. myFile.txt looks like:
Matt Brian John
However when I enter "Brian" (to remove this line), It is deleted on the temp file (myTempFile.txt), but not renamed back to the original file (myFile).
I think the lines need to be stored in ArrayList, then I would like those lines to write to csv file, but how on read I can construct such output file? This is my code for reading file
public ArrayList readFile(String filename) { try {
I need to search a txt file for a specific keyword and then output all the lines that contain that keyword. Right now I I think I have my search done but I don't know how I would print the whole line.
TextIO.readFile("xxx.txt"); String search; String word; int count=0; TextIO.put("Please enter your search word: "); search = TextIO.getln(); while (!TextIO.eof()) { word = TextIO.getln(); count = count+1; if (search.equalsIgnoreCase(word)==true){ TextIO.put(count + "-"); TextIO.put(word);
Right now it doesnt even let me enter in any values for the search. Not sure what I've done wrong..
So I'm trying to read 11 values from a text file, each value on a separate line. The first value I use as loop control to run through calculations on the other ten and finally output both the numbers and the calculations to the console and an output file. I'm not getting a compiler error or a runtime error but my loop seems to stop after reading the first line. It also doesnt seem to be writing to my output file but does create it when I run the program. This is what my text file looks like
import java.util.*; import java.io.*; public class assignment7scratch { Toolkit_General toolKit = new Toolkit_General(); public static void main (String[]args)throws IOException
[Code] .....
so I dont get an error but this is what my output looks like
----jGRASP exec: java assignment7scratch
This program reads a list of values representing number of miles driven by individuals. It will output the dollar amount their rental cars cost.
Number of miles traveled on the left as well as amount reimbursed on the right
----------------------------------------------- Miles Driven Amount reimbursed 150.427.072
----jGRASP: operation complete.
it also doesn't write anything to my output file, though it does create one.
tab separated values, for different columns and these are the lines only I want method to read.Now suppose if any is there as below, or even enter
12-01-0113:26San Jose12.99DVD 12-12-3009:40Miami13.50Music 14-08-3010:20Arizona16.03Scientist 11-07-1009:10New York25.00ColdPlay 14-08-3010:20Arizona18.04MeetYou [new lines] 14-08-3010:20Arizona50.03Scientist 11-07-1009:30New York25.00ColdPlay //This line should not be read even this should not be read #$%^& 11-07-1009:20New York25.00ColdPlay
That particular line should be escaped. Till now I have done when the file format is proper, and it is as below:--
public static void main(String[] args) { BufferedReader br = null; String temp = null; List<String> arrayRead = new ArrayList<String>(); try{ br = new BufferedReader(new FileReader("D: estingSalesData.txt"));
I want to read property file in java from command line argument,i.e. if i have some parameters which i have to use separately , i comment the parameters which i don't have to use that time , then uncomment when i have to use.
Is there and way to read the required parameters through command line arguments in java.
I am having a lot of trouble with this lab. basically I have to make a text processor to read in code put it into a file and output the contents of the input file in alphabetical order one word per line. I have to reference the string varaibles input_filename and output_filename.
import java.io.FileInputStream; import java.io.FileNotFoundException; import java.io.FileReader; import java.io.IOException; import java.io.PrintWriter; import java.util.Scanner; import java.io.File; public class TextProcessor {
[Code] ....
these are the guidelines to said lab:
1. In the main method define two Strings called input_filename and output_filename. I will be setting these Strings to my own file names for testing your code, so make sure you get these variable names correct, and that you use them properly in the following steps. 2. Read in the text contents of the file referenced by input_filename. 3. Split the contents of the input text into separate tokens, using whitespace as a delimiter. 4. Lower case the tokens. 5. OPTIONAL: remove punctuation 6. Alphabetize the tokens. 7. Using output_filename, write the alphabetized tokens to an output file, one token per line. 8. Be sure to close file streams - no resource leaks! 9. Use methods to separate functionality in your program where possible
I am trying to complete this question. I understand the most of it but I haven't go a clue to read in the file name.
Full question: Implement a program that reads in a Java source code file and checks to see if it has balanced {}brackets. Your program should use a stack, implemented as a linked list, to check the brackets.
NOTE: you can use a reference called top which points to the head of the list. Your program should run as a command line program and should take a filename as an argument and print one of BALANCED or NOT BALANCED.
For example: c:> java checkBalanced "myProgram.java" BALANCED
Write a program that reads in a line of text and then outputs that line of text first in all uppercase letters and then in all lowercase letters.
INPUT and PROMPTS. The program prompts for a line of text as follows: "Enter the text: " and then reads in an entire line of text as a String .
OUTPUT . There are four lines of output . The first line is "The text in all upper case is: ". The second line is the line that was read in, displayed in all uppercase. The third line is "The text in all lower case is: " and the fourth line is the original line that was read in, displayed in all lowercase.
CLASS NAMES. Your program class should be called ShoutAndWhisper.
This is what I have so far:
import java.util.Scanner; public class ShoutAndWhisper { public static void main(String[] args) { Scanner scannerObject = new Scanner (System.in); System.out.println("Enter the text: "); scannerObject.next(); System.out.println("The text in all upper case is: ");
My requirement is to find the line number using multiline string. Here I need to extract the string between FROM and where clause(from the below string) and need to find the line number in the file
SELECT HL.LOCATION_ID,HPS.PARTY_SITE_ID,HCAS.CUST_ACCT_SITE_ID INTO LN_SITE_LOCATION_ID,LN_LOC_PARTY_SITE_ID,LN_CUST_ACCT_SITE_ID FROM HZ_LOCATIONS HL, HZ_PARTY_SITES HPS,
How do I make the file reader object move to the next line if there is no more input on the line. Here is my text and output file as you can see that my text file column cuts off on the 2nd line after 70. I want to read that next line which is 100 into my labs variable however its reading it into my final exams variable. I'll also post the code but I didn't think it was necessary.
textfile: 100908095 1008070 10070
output: Labs Projects Tests Final Exams 100908095 1008070100 70
[import java.util.Scanner; import java.io.*; public class MyGrades { public static void main (String[] args) throws IOException { int lab, project, test; int finalExam;//Par and Player values
I am working on a project that requires me to build a database with random access file, representing products, the base product contains a name (about 30 characters), a price (double), and a quantity (integer). I have worked on this project for probably 15+ hours and have tried so many things and feel like I've barley made any progress...
The part i am really struggling with is taking the data from the text file and creating an object array with it using the product class. Once ive accomplished that, i have to use that data to create a random access file with the data.
Here is the base Product class that must be used to create the objects for the array.
public class Product { public String pName; public String stringName; public double price; public int quanity;
[Code] .....
And then here is the data from the text file that i must extract to use to create product objects.
These continue for about 40-50 entries, they are not separated by a blank line though i had to add those so it would display correctly, each entry is on its own line with name separated with spaces, then price after a comma, then quantity after the second comma.....
New to programming. Am supposed to create a program that reads a text file (of integers) and computes a series of computations on these integers. I don't have the code for the integers in my code yet, (i know how to do those), but am struggling getting the array to simply print in the print writer. I have the user select a text file, read the file with a scanner, and then save the computations done from my code into another file. specifically, the problem is as follows: Write a program that uses a file chooser dialog to select a file containing some integers. The file contains an integer N followed by N integers. The program then uses a file chooser dialog to let the user specify the name and location of an output file to write results to.The data written to the output file will be as follows
(1) The original list of N numbers from the input file, (2) The original list of N numbers printed in reverse order of how they appear in the input file. (3) The sum and average of these numbers, (4) The minimum of all the numbers, (5) The maximum of all the numbers.
I am trying to create a file browse option in my jsp and later after browsing, all i want to do is to read that file in my jsp without saving it into that database so that i can perform encryption for it and save that encrypted file later into my database. please provide reference link so that i can refer to some applications and and move ahead with my work.
If I want to read my file line by line and when it hits a certain value from that point it should start deleting the lines until the tag ends.Just curious will my code actually work at the moment or not because it goes through so many times then goes straight back to the variable declarations at the start of the method and never hits the console print line.
public void removeEnvironment(){ //declare variable to environment id String environmentID = "Environment id"; String lines = null; boolean lineFound = false; boolean end = false;
I have wrote this class who read from text line by line and save the words in fileOnTable.. Now i don't know what to read in ReadOffer to save the words in object offers and return this.. One more question.. What JUnit test can write for this code..?
I am looking for a good and reliable library to read a string to construct a list of Integers, Doubles, Booleans, etc. This library should be robust enough to handle faulty input from an inexperienced user.
I have a csv file and I want to insert the csv file into the database columns consist of date, description1, description2, amount1, amount2, narration.. but the problem is the narration is coming in second line in csv file due to which the data is not getting inserted into the database. So how to append the narration into the first line,I have enclosed the demo format of csv file and a code to read the csv file..
myFile.csv file:
20-5-2013,"Cash Rec. From abc","pymt",-500.00,, "Cash rec. from abc office",
20-5-2013,"Cash Rec. From xyz","rcpt",-5100.00,, "Cash rec. from xyz office",
