Stack Is Filled With Numbers And Characters
Oct 31, 2014
I have a Char stack: ArrayStack<Character> stek=new ArrayStack<>();
The stack is filled with numbers and characters (only '+' and '*' ), but I need to make calculations, so I need the INT values of the numbers i pop from the stack. So each time I need to make a calculation, I have to pop two numbers, convert them into INT ,then add/multiply them, and put them back into the stack again, but as CHAR (because the stack is not accepting them to be added as INT)
int a= Character.getNumericValue(stek.pop()); //stack no1
int b= Character.getNumericValue(rezultat.pop()); //stack no2
int tmp=a*b;
char tmp2 = (char) tmp;
stek.push(tmp2);
View Replies
ADVERTISEMENT
Feb 15, 2015
I was inquiring about selecting random numbers from a Fibonacci array, the original post for which is here: Exiting a 'for' Loop Early. I have managed to achieve this with the following code:
System.out.println("Random numbers from the Fibonacci array");
for(int i = 0; i < limit; i++) //Limit is an 'int' of 15 & is set as the length of the Fib. array. I'm calling it for the Random array, too!!
{
Random dice = new Random();
int randomIndex = dice.nextInt(array.length); //The Fib. array was simply called 'array'!!
if (array[randomIndex] < 100)
{
System.out.print(array[randomIndex]+ " ");
}
}
When the code prints I get a random set of numbers which occur in the Fibonacci sequence preceding it. However, the actual length of this Random array also changes each time, and never more than the limit of 15 specified in the 'for' loop. What I want to try and do is print the Random array with a specific length each time. I've tried changing the conditional statement of the 'for' loop in different ways to set the Random array's length, but had no luck.
View Replies
View Related
Feb 21, 2014
Right now I have three stacks. Each stack holds characters, with the normal operations of pushing and popping. I am trying to compare two characters from stack1 and stack2(each character is a digit character). I would like to be able to do arithmetic on the digit characters and the push the answer on to a result stack.
Ex.) I pop character '3' from stack1 and '5' from stack2. Then I add the two. equaling '8' and pushing that character on to the result stack. This will hopefully in turn allow me to add arbitrary large numbers that integers will not support.
I am having trouble because I believe I am getting some ascii character values when I pop off the result stack. here is a small piece of my code
public void addition() {
char temp1 ,temp2;
int i = s1.getSize();
for(int j= 0;j<i;j++) {
temp1 = s1.pop();
temp2 = s2.pop();
if(temp1+temp2>=10)
[Code] .....
View Replies
View Related
Apr 26, 2015
This method keeps throwing a NullPointerException. Not only that, but its not doing what I want it to do.
Heres the code:
/*
Remove all the numbers from the queue and push onto the stack until an operator is reached
*/
private static void processQueue() {
// Check what is at the front of the queue. If an operator is found or the queue is empty, exit method.
while(queue.front() != null || !queue.front().equals("*") || !queue.front().equals("/") || !queue.front().equals("%")
|| !queue.front().equals("+") || !queue.front().equals("-"))
{
stack.push(queue.removeFront()); // push the operand onto the stack
}
}
Here is the method that calls the processQueue() method
/*
Process the mathematical expression using a stack and a queue
*/
private static double processExpression() {
// insert all elements from the stack to the queue for processing
while(stack.top() != null) {
queue.insertBack(stack.pop());
[Code] .....
View Replies
View Related
Oct 17, 2014
Do I want to make something like this:
*****
*.....*
*.....*
*.....*
*****
I am stuck, I have made a code that creates this and don't know how to complete it.
*****
* *
* *
* *
*****
Code:
class Main {
public static void main( String args[] ) {
System.out.print("#Enter number of stars :");
int stars = BIO.getInt();
[Code] ....
View Replies
View Related
Oct 9, 2014
Im building a program that tracks overtime for employees. Basically there will be a list of employees. Number will be dynamic as different departments will have different amounts of employees.A user could pick the department from a JCombobox. E.g Quality Control. A Jtable will be populated with the employees from Quality Control.
The problem is this.
The way it will work is the list will be in a specific order. Whoever is at the top of the list will be asked if they want to do overtime. Then they will be moved to the back of the queue. If they do the work or not doesnt matter.How would i go about planning a system like this? Specifically creating a dynamic list that people can be moved up and down and stored persistently. URL...
View Replies
View Related
Nov 16, 2014
I'm a complete beginner in Java programming and I'm interested to learn more about its concepts.
Recently, I've been given an exercise which instructs me to display two versions of a picture. The picture to be displayed is provided in the form of a data file of 40,000 digits that are arranged in rows (although there is no marker between rows) and it starts from the top of the picture. So the first digit represents the top left corner of the picture and the last is the bottom right.
Basically, what the exercise wants me to construct a program that plots a dot in one of two colours for each digit. If the digit is in the range 0 to 3 the output should be one colour and for digits in the range 4 to 9 the dot should be in the other colour.
I understand I have to use arrays and also loops to perform this. I'm familiar with the fillEllipse, drawEllipse, drawRectangle and fillRectangle but this exercise is nothing I've attempted before.
View Replies
View Related
Apr 13, 2014
Write a program that shows a square frame filled with 100 buttons labeled 1 to 100. Nothing needs to happen when you press any of the buttons. I keep getting errors i am a beginner.
import java.awt.Frame;
import javax.swing.JButton;
import javax.swing.JPanel;
class TestFrame extends Frame {
[Code] ...
View Replies
View Related
Aug 22, 2014
I tried to create file and write the output of my program in it in java when i use WriteLong then the file does not contain long value, how I create this file my program is to print prime numbers between 500000 to 10000000
public class primenumber {
public static void main(String[] args) {
long start = 5000000;
long end = 10000000;
System.out.println("List of prime numbers between " + start + " and " + end);
for (long i = start; i <= end; i++) {
if (isPrime(i)) {
System.out.println(i);
[Code] ....
View Replies
View Related
Apr 24, 2014
I've just written a program that generates 100 numbers that range from 0 ~ 25 using arrays, the program calls another method that sorts the even numbers into a separate array and returns the array. I need it to display both arrays, however, when I run my program, the numbers of both arrays are mixed together, and I'm not sure how to separate them.
[ public class Array1
{
public static void main(String[] args)
{
int array [ ] = new int[100];
for (int i = 0; i < array.length; i++)
{
array[i] = (int) (Math.random() * 26);
[Code] .....
View Replies
View Related
Feb 1, 2015
I'm trying to make a program that generates 20 random integers between 1 and 20 and then prints the list of random numbers to the screen. After that, I want to print a different list to screen with the same numbers from the first list only skipping any number that has been already printed to the screen. So two lists are printed to the screen. The first one has 20 random numbers. The second one has those same 20 numbers but only prints the numbers in the first list that aren't duplicated. So if m
y list of 20 random integers contains three 2s and two 14s, only one 14 and one 2 is printed to the second list. Currently, my code generates 20 numbers from 1 to 20 and stores those numbers in an array but I don't know how to print solve the second part of my problem. I don't know how to print the s different list only without duplicate numbers. As a result, my output is nothing because it doesn't print any number from the first list as oppose to skipping only duplicate one.
public void randomNum(){
System.out.println("Twenty random integers: ");
int max = 20; // max value for range
int min = 1; // min value for range
Random rand = new Random();
int[] all = new int[20];
[Code] ....
View Replies
View Related
Nov 23, 2014
I have to make a program that prompts the user to enter 10 numbers and at the end it prints out the distinct numbers and then the other numbers that weren't repeated...
I have the part where it prints out the distinct numbers but I stuck on how to make it print out the other numbers that didn't repeat...
import javax.swing.JOptionPane;
public class DistinctNumbers {
public static void main(String[] args) {
String getInput;
int input;
int[] numbers = new int[10];
[Code] ....
View Replies
View Related
Jan 5, 2015
is this program correct? for Implementing two Stack in one array. how can i solve it ?
public class Stackation11 {
int max = 10;
int [] array = new int[max];
int top;
int top1;
Stackation11(){
[code]....
View Replies
View Related
Apr 24, 2014
after i am done calculating everything from numbers stack, i pop the last number and return it... my question is how can i catch an exception if the size of my numbers stack is greater than 1;
public static String evaluate(String input) {
char[] a = input.toCharArray();
if (input.isEmpty())
return "No input";
else if (input.equals(" "))
return "No input";
else if (input.equals(" "))
[code]....
View Replies
View Related
Apr 11, 2014
Write a method compressDuplicates that accepts a stack of integers as a parameter and that replaces each sequence of duplicates with a pair of values: a count of the number of duplicates, followed by the actual duplicated number. For example, suppose a variable called s stores the following sequence of values:
bottom [2, 2, 2, 2, 2, -5, -5, 3, 3, 3, 3, 4, 4, 1, 0, 17, 17] top
If we make the call of compressDuplicates(s);, after the call s should store the following values:
bottom [5, 2, 2, -5, 4, 3, 2, 4, 1, 1, 1, 0, 2, 17] top
This new stack indicates that the original had 5 occurrences of 2 at the bottom of the stack followed by 2 occurrences of -5 followed by 4 occurrences of 3, and so on. This process works best when there are many duplicates in a row. For example, if the stack instead had stored:
bottom [10, 20, 10, 20, 20, 10] top
Then the resulting stack after the call ends up being longer than the original:
bottom [1, 10, 1, 20, 1, 10, 2, 20, 1, 10] top
If the stack is empty, your method should not change it. You may use one queue as auxiliary storage to solve this problem. You may not use any other auxiliary data structures to solve this problem, although you can have as many simple variables as you like. You may not use recursion to solve this problem. For full credit your code must run in O(n) time where n is the number of elements of the original stack.
I wrote a code but still having a problem with it , am I allowed to use 3 while loops ?
public void compressDuplicates(Stack<Integer> s ){
Stack<Integer> backup= new Stack<Integer>();
int count = 1;
while(!s.isEmpty()){
int temp = s.pop();
[Code] .....
// example 1
Expected output : bottom [5, 2, 2, -5, 4, 3, 2, 4, 1, 1, 1, 0, 2, 17] top
My output: //bottom [17, 2, 2, 2, 2, 2, -5, -5, 3, 3, 3, 3, 4, 4, 1, 0, 17, 17] top
View Replies
View Related
May 2, 2015
For my classes I wrote I have puts strings into a stack and also a queue and am wondering how to take the top of the stack and the front of the queue and turn those into strings in my main class and run them through while loops that will detect if they are palindromes or not. Right now I am trying to peek and use first to put in my while loop but they don't work with the .charAt because they are not considered strings I think.
import java.util.Stack;
public class Palindrome {
public static void main(String[] args) {
// TODO Auto-generated method stub
String enteredLine;
int leftStack, rightStack;
int leftQueue, rightQueue;
[Code] .....
View Replies
View Related
Jun 16, 2014
In my application a series of inputs and a calculated result. At the end of each loop these inputs and calculations are displayed. After the loop is over with the user does not enter a string that is "y" or "Y", I want these inputs and the calculation to be displayed in a First in First Out format or a stack. I am using a LinkedList that is used in a class creating a stack.
Here is the code for my stack.
Java Code:
import java.util.LinkedList;
public class GenericStack<E> {
LinkedList<E> stack = new LinkedList<>();
public void Push(E element) {
stack.addFirst(element);
[Code] ....
Here is the code containing the main method. The methods other than the main method are probably not relevant to the problem, but take a look if you like.
Java Code:
import java.util.*;
import java.text.*;
public class FutureValueApp
{
public static void main(String[] args) {
GenericStack<String> stack = new GenericStack<>();
[Code] ....
The stack seems to be adding the same inputs and the same calculation from the first loop, even when it is on it's 2nd or third loop. I am getting this output.
Java Code:
Monthly Inv.Int. RateYearsFuture Value
$5.002.0%5$315.76
$5.002.0%5$315.76 mh_sh_highlight_all('java');
View Replies
View Related
Jan 3, 2015
I tried to write a program to implement a stack but it has a bug I am unable to solve.The bug is that whenever I choose an operation to perform, eg push, After performing the operation, the loop is executed once again and Invalid choice message appears, i.e. the default case. And then the loop again executes to choose further option. Here is my code
class Stack {
private char[] stck;
private int len;
private int top;
[code]....
View Replies
View Related
Oct 22, 2014
I am getting a stack overflow error for my method that recursively gets the height of an AVL tree. The odd thing is that it returns the height of the tree the first time I call that method, but when I call it again later on, I get that error, which I does not make any sense to me. I have a base case, where it is supposed to stop when the node is null, but it never reaches that. Also, when I print out the values, it alternates b/w three values: 5, 4, and 24. Something else, which I think is important to state, is that if I put the print statement before my base case, the IF, I get a warning stating that my entire IF statement is dead code...but why?
is that everytime I insert/delete a value into the AVL tree I must make sure that it is height balanced (none of the siblings may have a difference in height from each other > 1); if its not height then I rotate certain nodes accordingly. The first 10 items that I input are: 100, 50, 24, 200, 190, 10, 5, 190, 100 and 4. The pre and in order prints of these, from the console are:
PRE ORDER: 100 10 5 4 24 50 200 190 100 190
IN ORDER: 4 5 10 24 50 100 100 190 190 200 .
private int rheight(AVLNode<E> node) {
//if i put the print statement here, my IF becomes "dead code"
if(node == null){
return 0;
}
else{
[code]....
View Replies
View Related
Dec 3, 2014
I am working on implementing a stack using a linked list. Programming the stack operations (push, pop, isEmpty, etc.) was easy but my directions were to provide the user with a menu to choose the operation that he/she wishes to perform. I am new to JFrames/Menus so how to make the stack operations available in a menu.
View Replies
View Related
Jun 3, 2014
I was cannot do the action with + - * /.so i cannot have an output.where is the problem ?
Java Code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
import java.util.Stack;
[code]....
View Replies
View Related
Mar 10, 2015
Create an integer array with 10 numbers, initialize the array to make sure there are both positive and negative integers. Write a program to generate two arrays out of the original array, one array with all positive numbers and another one with all negative numbers. Print out the number of elements and the detailed elements in each array.
public class problem3 {
public static void main(String[]args){
int[] numbers = {1, 2, 3, 4, 5, -1, -2, -3, -4, -5};
for (int i = 0; i<numbers.length;){
if(i>0){
System.out.println(numbers);
}
else
System.out.println(numbers);
}
}
}
View Replies
View Related
Apr 30, 2015
I'm trying to create a class that takes an String from a Stack and checking if it's a palindrome than taking a another String from a queue and checking if that is also a palindrome.
import java.util.Stack;
public class Palindrome {
public static void main(String[] args) {
// TODO Auto-generated method stub
String enteredLine;
int leftStack, rightStack;
int leftQueue, rightQueue;
PalinedromeArray stack1 = new PalinedromeArray();
[code]....
View Replies
View Related
Jun 3, 2014
I have to implement all the stack methods in java such as push, pop empty, not using the ready methods but have to create them and to execute an exercise but is sth wrong with it
public class Stiva {
/** the problem is here how to declare the stack 1 and stack 2 and kreu(head) gjmax(size)*/
int Gjmax;
int array[] = new int[Gjmax];
int kreu;
private Stiva stiva1;
private Stiva stiva2;
[Code] .....
View Replies
View Related
Feb 26, 2014
I have the following code where I call panel repaint method from the action listener of the calc button but it causes stack over flow but when I modify it to call paint component method and removing the super term, the program executes. here is the code
import java.awt.Dimension;
import java.awt.Graphics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.Box;
import javax.swing.JPanel;
import javax.swing.JTextField;
import javax.swing.BoxLayout;
[Code] .....
View Replies
View Related
Apr 14, 2014
Im trying to create a linked stack that will hold the starting directory to the current directory, so that when i finish a directory it would go back to the parent. as i go through the files in a directory and find a child directory, i have to stack current directory and process the child directory, when thats done, pop the parent from the stack and continue processing it. Here is my code:
//import io File and ioexception
import java.io.File;
import java.io.IOException;
/*create class that will take a path to a directory, print the name of the argument directory, print the name of each file and directory in argument directory. Prints the directory name and each file and directory inside*/
public class dirStackPrint
[Code] .....
when I run the program, nothing prints, why is that? I'm having trouble understanding the processing of the top, push and pop functions, i have them in my code but they don't seem to be working as they should?
View Replies
View Related