I am trying to use double data type in a for loop for precise operations and just to see if there could be any problem doing that I tested a small code :
public class doubleLimit {
public static void main(String[] args){
for(double i=-0.1;i<=0;i+=0.01)
System.out.println(i); }}
The output I was expecting is :
-0.1
-0.09
-0.08
-0.07
-0.06
-0.05
-0.04
-0.03
-0.02
-0.01
0.00
But the output of the code is :
-0.1
-0.09000000000000001
-0.08000000000000002
-0.07000000000000002
-0.06000000000000002
-0.05000000000000002
-0.040000000000000015
-0.030000000000000013
-0.02000000000000001
-0.01000000000000001
-1.0408340855860843E-17
Why is the code not working the way I expected, I think it has something to do with any property of double but I am not sure.
I was struggling to use BufferedReader to extract some data and then perform some calculations and then have the results as outputs.
I haven't quite solved that issue but in order to progress, I hard coded some values into my application and proceeded with the actual calculation loops etc.
Currently, the value out put from one of my calculations is given as:
1.1704926E7
How can I make the console show it in a natural way. I've performed the calculation manually and it should be 11704926.5 I don't want to lose that .5!
I am trying to print a loop inside an array of a greater size than the loop itself. Like for example I have an array of size 7 but it has only 3 elements.
now what I want to do is print these three numbers in a loop so that my array[3]=2;array[4]=3;array[5]=4 ...... till the last one. Also the array could be any size and not just 7.
I have everything else working. My problem is that when i type "quit" to close the outer loop. It still runs the inner loop. The National Bank manager wants you to code a program that reads each clients charges to their Credit Card account and outputs the average charge per client and the overall average for the total number of clients in the Bank.
Hint: The OUTER LOOP in your program should allow the user the name of the client and end the program when the name entered is QUIT.In addition to the outer loop, you need AN INNER LOOP that will allow the user to input the clients charge to his/her account by entering one charge at a time and end inputting the charges whenever she/he enters -1 for a value. This INNER LOOP will performed the Add for all the charges entered for a client and count the number of charges entered.
After INNER LOOP ends, the program calculates an average for this student. The average is calculated by dividing the Total into the number of charges entered. The program prints the average charge for that client, adds the Total to a GrandTotal, assigns zero to the Total and counter variables before it loops back to get the grade for another client.Use DecimalFormat or NumberFormat to format the numeric output to dollar amounts.
The output of the program should something like this:
John Smith average $850.00 Maria Gonzalez average $90.67 Terry Lucas average $959.00 Mickey Mouse course average $6,050.89 National Bank client average $1,987.67
Code:
public static void main(String[] args) { Scanner scan = new Scanner(System.in); String name = ""; int charge = 0; int count = -1; int total = 1; int grandtotal = 0; int average = 0;
I'm not sure why, but whenever I try to get a value out of a double, it only extends to one decimal place. For instance, (825 / 805) would become 1.0000 (after being run through a DecimalFormat object) instead of 1.0248 like I need it to be (and should be if what I know about primitive variable types is right). Why is the double variable type not giving me the precision I want and, more importantly, how do I fix this?
Write method distance to calculate the distance between two points (x1, y1) and (x2, y2). All numbers and return values should be of type double. Incorporate this method into an application that enables the user to enter the coordinates of the points.
Hints:
- The distance between two points can be calculated by taking the square root of
( x2 - x1 )2 + ( y2 - y1 )2
- Use Math class methods to compute the distance.
- Your output should appear as follows:
Type the end-of-file indicator to terminate
On UNIX/Linux/Mac OS X type <ctrl> d then press Enter
On Windows type <ctrl> z then press Enter
Or Enter X1: 1
Enter Y1: 1
Enter X2: 4
Enter Y2: 5
Distance is 5.000000
Type the end-of-file indicator to terminate
On UNIX/Linux/Mac OS X type <ctrl> d then press Enter
I've just been having a go at an exercise where I have to create and use a class called Point, with two fields of type double. I have to create some methods for it, one of which is a distanceTo(Point) method, that calculates the distance to another point. I've tried to keep the distanceTo(Point) method short so have created some other methods to use within the method. My question is about the getDistance() method that I've made. As you can see below, I've given it two parameters, which are references to values within two Point objects (this.x and otherPoint.x).
I am trying to clear all graphical objects of a certain type(all trees in particular). I have never had any issues doing so, and this method normally works well along with these variables:
Java Code:
public static ArrayList<GRect> historyT; public static ArrayList<GOval> historyL; public static GRect trunk; public static GOval leave; public void deleteTrees() { //clears all tree trunks and leaves
[Code]...
That is this normally worked until I started added more trees to the screen after they had all been erased. What happens is that it won't clear all of them unless the max has been reached, that is 6. It will remove all trees up till the last one if the max has not been reached. In other words here is my screen before the clear all if the max has not been reached(* is a tree, _ is erased): ****
Here is it after: _ _ _ _ *
So my question is, is why aren't all the trees deleted? Why does it leave one left behind?
I've been stuck for the last couple hours trying to understand why the "printInReverse" method is getting into an infinite loop. I was supposed to make a double linked list that you can insert numbers and it orders both ascending and descending; in this case, descending is the "printInReverse" method, which takes the already ordered lists and prints it reversed, like if it was descending, and that's where the problem lives. Here follows the whole code:
Write a program that creates an array that can hold 9 double values that represent baseball batting averages for a starting baseball lineup. Use a for loop to populate array with random double values in the range of 0.00 to 0.500. Recall that "double" values are what Java calls "real" numbers. Use a second for loop to print the values in the array with one number per line. Finally, use a third for loop to traverse the array and find and print the maximum batting average in the array. Note: you will need to use String.format to control the precision of a double number when you print it- Here is my code so far:
public class P2F { public static void main (String[] args) { double [] player= new double [9]; //player[0]= Math.random(); for (int index=0; index < player.length; index++) {
[Code] ....
When I open the terminal window I get different variations of this [D@4545c5]. I would like to know all the things I am doing wrong.
So I need to make a for loop for this problem: A certain type of bacteria doubles its population every twelve hours. If you start with a population of 1000, how many hours will it take for the population to exceed 1,000,000? Output needs to be in table format, such as:
I have a double primitive and gave it a huge value. I am curious if valueOf could ever potentially cause data loss. I tried a simple test and it seems it never loses any data:
Java Code:
public class DoubleStringTest { public static void main(String[] args) { double val = 1029.129348558634; System.out.println(val); System.out.println(String.valueOf(val)); } } mh_sh_highlight_all('java');
import java.util.ArrayList; import java.util.Arrays; import java.util.List; public class array { public static void main(String[] args)
[Code] ...
Is there a way to write this, where, alpha is one array.
Write a program that declares an array "alpha" of 50 elements of type "double". Initialize the array so that the first 25 elements are equal to the square of the index variable and the last 25 elements are equal to three times the index variable. Output the array so that 10 elements per line are printed.
If I have an array of 50 integers, can I break that to read in lines of 10?
As shown in the SS I show the data of the batch from the db.Now I want to edit the data of the jtable using the default Double editors and also show the data using a Date renderer in dd/MM/yyyy format.The problem is when the data is loaded from the db,I am not knowing how to implement and set the editors to double and date.I am new in java.The code of the above is shown as follows.
Java Code: /* * To change this template, choose Tools | Templates * and open the template in the editor. */ package Billing; import java.awt.Component; import java.sql.Connection; import java.sql.Date; import java.sql.PreparedStatement; import java.sql.ResultSet;
I am running this method but for some reason I am not able to find the data record, it keeps going to the catch. I have the data.txt file in the same directory as the java file.
public static Games[] gamesRecord(){ Games[] game = new Games[50]; try{ Scanner dataFile = new Scanner(new File("data.txt")); for(int i = 0; i > 50; i++){ game[i].title = dataFile.next(); game[i].releaseDate = dataFile.nextInt(); game[i].redistributions = dataFile.nextInt(); game[i].platformRelease = dataFile.next();
I am trying to prevent data from being overwritten and appended instead when I save it to a file. I already set the append boolean to true on the FileOutputStream, but the data is still being overwritten. My code is below:
public class Main { public static void main(String[] args) { LinkedHashMultimap<String, Integer> testMap = LinkedHashMultimap.create(); //ListMultimap<String, Integer> test = ArrayListMultimap.create(); OutputStreamWriter outputStream; testMap.put("NumberA",1); testMap.put("NumberA", 33);
[Code]...
I performed a print statement to verify that the LinkedHashMultiMap is not replacing values with the same key (which it was not) and realized that the overwriting was occurring when I wrote the data to a file.
I am writing a code in which a user inputs data as a string and that data must be verified as a valid number. A valid number is anything from 0-100. Then all valid numbers are converted into double numbers.
I am having trouble in how to write the validation part of the code.
Is it suppose to be an if, else statement? And if so how is it suppose to be validated?
I am trying to connect to a local service over UDP - the simulator works fine, but my code does not... The sender is a separate thread and I have tried blocking, non-blocking, connecting, not connection, reading and re-reading the Oracle docs,
I've been trying to pull data from another class file "Calculations.java" and have it be displayed in a TextField in "DataAnalyzerGUI.java". Here is how the hierarchy is broken down for my assignment: