I'm new to java and i'm trying to figure out how to calculate power in java using the for loop.
The geometric sequence is (d*c^(n-1)).
So it goes d, d*c^1, d*c^2,......., d*c^(n-1)
??????for (i=1; i<=n; i++){
result
}????????
How to program this. how do i write this using for loop?
How do you use power of math. I'm trying to write a calculator to calculate the volume of a cylinder by asking the user to enter the height and radius but when I use pow(2) it doesn't work. I imported java.lang.math class so i dont have to keep using math. for now my code runs just fine since I'm using radius * radius but I would really luv to use the power instead times each other when i have to use higher powers.
import java.util.Scanner;
import static java.lang.Math.*;
public class Lab2 {
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
[Code] .....
It's suppose to generate a table with the month, and the new amount of the CD. Right now, the program generates a continuous table for months, but it doesn't update the value of the CD.
import java.util.*;
public class Excercise04_31 {
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner input = new Scanner(System.in);
[Code] ....
I wanted to know if I was off to the right start. I am trying to write a program using the for loop the calculate the product of the consecutive numbers 4 through 8 but so for I am getting 3 values output and I only want 1 value at the print out.
The code I am using outputs the numbers too large. I am trying to see where I went wrong.
for ( int i = 4 ; i <= 8; i++)
{
int j = i++;
int k = j++;
int l = k++;
int m = l++;
System.out.println( + (i*j*k*l*m) );
}
having some trouble doing this. Here are the requirements:
1)Write a program using loop and break to calculate the value of PI.
2)You can use the following equation to calculate PI. PI=4/1-4/3+4/5-4/7+4/9-4/11+4/13 etc.. The program shouldn't loop until the criteria is satisfied.
3)The criteria is the value of PI you get is very close to the “real” value (3.1415926), meaning that their difference
should be smaller than a very small numeric number, e.g., 0.0001).
4)The control structures you may need for this program are loop, if-else, and unlabeled break.
5)The output should have the format: for each iteration, it has iteration number and the corresponding value of PI until that
iteration. The last line would be the final value of PI.
Here is my code so far:
package ids;
public class IDS {
public static void main(String[] args) {
double pi = 0;
for(int i=1; i<=100000; i++){
if ((i%2)==0){
pi+=(4/(2*i-1));
[code]...
So basically, I've been trying to create a for loop that asks the user for a number between 1 and 30, then calculates the total of the series of numbers. For example, if 15 is entered, the calculation should be 1/15+2/14+3/13+...15/1 which would equal approximately 38.1. The problem I'm having is that the code doesn't loop whenever I type a number for some reason, which results in a very incorrect calculation. Here is my code so far:
import java.util.Scanner;
public class HmwLoop {
public static void main(String[] args) {
double sum = 0;
for (double num1 = 1, num2 = 30; num1 <= 30 && num2 >= 1; num1++, num2--)
[Code] .....
So I've attempted a for loop for this type of problem:If you receive $0.01 on the first day of your allowance, and the daily rate doubles each day after, calculate the total earnings for 30 days.
Output should be like:
Day ----- Daily allowance - Total allowance
1 -------- 0.01 -------------- 0.01
2 -------- 0.02 -------------- 0.03
3 -------- 0.04 -------------- 0.07
My code so far:
public class Allowance
{
public static void main (String[] args)
{
int day = 0;
double daily = 0.0;
double total = 0.1;
System.out.println("Day Daily Allowance Total Allowance");
for(day = 0; day <= 30; )
[code].....
I am trying to write a loop that calculates the distance traveled (distance = speed * time). It should use the loop to calc how far the vehicle traveled for each hour of time. My program asks for hours and then mph but its not calculating time * speed. Here is my code.
public static void main(String[] args) {
Scanner input = new Scanner(System.in);
System.out.println("Enter Hours Traveled ");
int hoursTraveled = input.nextInt();
System.out.println("Enter MPH ");
int mph = input.nextInt();
[Code] .....
Basically I need to make a program prompts the user for an integer, check to make sure the length entered by the user is a power of 2 and at least 2. Then I need to convert from base e to base 2 then I need to print the tick marks of a ruler based of the value of the length.
I got the whole converting thing working and the check for a power of 2, that wasn't an issue because it didn't require any recursion. I just don't know how to print out the proper tick mark values.
The way it is supposed to work is that it needs to look like this. Say the user enters 8;
012131210
012345678
Or if the user enters 16;
01213121412131210
01234567890123456
The bottom row is pretty much just the index value, that I print fine.
The top row though is supposed to be the length of the ticks on a ruler, with the middle most value being the value of the conversion from base e to base 2 from above. I can get that printed and what I get just looks like this.
For 8;
000030000
012345678
For 16;
00000000400000000
01234567890123456
As you can see I can get the middle value and the index values below but I don't know how to use recursion to get the right numbers.
Here's my current code.
import java.util.*;
public class TickMarks {
public static void main (String args[]){
Scanner input = new Scanner(System.in);
boolean looping = true;
while(looping == true){
System.out.print("Please enter a length: ");
[Code]...
Now the methods isPowerOfTwo() and printLength() both work fine. However, I'm not sure how to get the left and right side working.
My thoughts were to split the length in half and get a left and right side. I gave both of them arrays so I can keep track of the values. Now as you've seen above I get all zeros and I know it's because that's the default value in an array, I just don't know how to get the proper values.
I am trying to print a loop inside an array of a greater size than the loop itself. Like for example I have an array of size 7 but it has only 3 elements.
int[] array=new int[7]
array[0]=2;
array[1]=3;
array[2]=4;
now what I want to do is print these three numbers in a loop so that my array[3]=2;array[4]=3;array[5]=4 ...... till the last one. Also the array could be any size and not just 7.
Here's the code: it's while loop inside a for loop to determine the proper length of a variable:
for (int i = 0; i < num; i++) {
horse[i]=new thoroughbred();
boolean propernamelength = false;
while (propernamelength==false){
String name = entry.getUserInput("Enter the name of horse "
[code]....
I was just wondering what was going on here -- I've initialized the variable, so why do I get this message? (actually the carat was under the variable name inside the parentheses.
I have everything else working. My problem is that when i type "quit" to close the outer loop. It still runs the inner loop. The National Bank manager wants you to code a program that reads each clients charges to their Credit Card account and outputs the average charge per client and the overall average for the total number of clients in the Bank.
Hint: The OUTER LOOP in your program should allow the user the name of the client and end the program when the name entered is QUIT.In addition to the outer loop, you need AN INNER LOOP that will allow the user to input the clients charge to his/her account by entering one charge at a time and end inputting the charges whenever she/he enters -1 for a value. This INNER LOOP will performed the Add for all the charges entered for a client and count the number of charges entered.
After INNER LOOP ends, the program calculates an average for this student. The average is calculated by dividing the Total into the number of charges entered. The program prints the average charge for that client, adds the Total to a GrandTotal, assigns zero to the Total and counter variables before it loops back to get the grade for another client.Use DecimalFormat or NumberFormat to format the numeric output to dollar amounts.
The output of the program should something like this:
John Smith average $850.00
Maria Gonzalez average $90.67
Terry Lucas average $959.00
Mickey Mouse course average $6,050.89
National Bank client average $1,987.67
Code:
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
String name = "";
int charge = 0;
int count = -1;
int total = 1;
int grandtotal = 0;
int average = 0;
[code]....
How to convert this program from a while loop to a for loop.
import java.util.Scanner;
public class LongDivision {
public static void main(String arguments[]){
Scanner input = new Scanner(System.in);
System.out.println("Enter the dividend: ");
[Code] ....
How do I convert my for loop below to a while and do while loop?
for(int a=1;a<=9;a++){
for(int b=1;b<=a;b++){
System.out.print(a);
}
System.out.println();
[Code] .....
I am trying to make a program add values from a loop. So what its supposed to do is search through tokens on an imported file. The file lists State, Capital, and then capital population. Then take the population string, turn it into numbers, and then do stuff with the numbers. First I'm supposed to find the Highest and lowest population of the places in the file (which I did without problem), but the finally thing is I'm supposed to add each found population to the last so I can find the average of the populations.
I just cannot seem to grasp how to do that. I THINK I'm supposed to some how store the given value into a variable, but how do I get that variable to add to the new value?
like...?
Get token -> a
b = a
c = a + b
or wait no.....
Java Code :
import java.io.*;
import java.util.Scanner;
public class CapPopS
{
public static void main(String[] args) throws IOException
{
File stateCAP = new File("state-capital-2004population.txt");
if (!stateCAP.exists())
[Code] ....
I made a MVC calculator. I was wondering if you could take a look at my design and if I was on track. I am still working on getting it to actually calculate something. All the buttons respond and print text on the JTextField but it is not calculating.
package calculator.MVC;
import javax.swing.JButton;
import javax.swing.JTextField;
public class CalculatorModel {
private int sum;
private int number;
private char opt;
[code]....
public class NewClass4 {
public static void main(String[] args) {
int a = 1;
int b = 2;
int c = 3;
a += 5;
b *= 4;
c += a * b;
c %= 6;
System.out.println("a = " + a);
System.out.println("b = " + b);
System.out.println("c = " + c);
This is the code
public class PondRadius {
public static void main (string[] args) {
//Calculate the radius of a pond
//which can hold 20 fish averaging 10 inches long
int fishCount = 20;//number of fish in pond
int fishLength = 10;// Average fish length
int inchesPerFoot = 12;//number of inches in one foot
[Code] ....
And here is the error or exceptions i received
C:javaLesson1>javac PondRadius.java
PondRadius.java:23: error: ')' expected
System.out.println("To hold" + fishCount + fish averaging " + fishLength +" inch
es long you need a pond with an area of
" +
[Code] .....
So I have this code to calculate the lowest value of an array:
public class Exercise1 {
public static void main(String[] args) {
int[] theArray = {1/*/,2,3,4,5,6,7,8,9,10/*/};
int result = Exercise1.min(theArray);
System.out.println("The minimum value is: " +result);
[code].....
and I need to write an exception class that should be thrown if the array does not hold any elements.
I have been tasked with creating an invoice (school assignment). Part of the calculations is creating an interest depending on the amount of days between the current date entered, and invoice date entered (The program prompts the user to enter both the current and invoice dates by asking for the day, month and year).
We are also supposed to set the contructor to a default date of 1/1/1900.. but I don't know how or where to code that.
How to calculate the difference between the CurrentDate and Invoice. I have displayed the dates to the user as follows.
public void displayDate() {
System.out.println("
Today's Date: " + month + "/" + day + "/" + year);
}
public void displayInvDate() {
System.out.println("
Invoice Date: " + invMonth + "/" + invDay + "/" + invYear);
how does the program know to calculate for only one year?
public class Interest2 {
public static void main(String[] args) {
double principal; // The value of the investment.
double rate; // The annual interest rate.
double interest; // The interest earned during the year.
[code]....
i need to calculate the minimum and the maximum, actually it seems to be easy but, the minimum should be the smallest number but 0..this is my code
Java Code:
Scanner s = new Scanner (System.in);
int max = 0 ;
int min = 0 ;
System.out.println(" Please enter 3-5 numbers");
int a = s.nextInt();
int b = s.nextInt();
int c = s.nextInt();
int d = s.nextInt();
int e = s.nextInt();
[code]....
there are the normal parking rates with two condition using two difference code and two difference calculator method. the fees for the two code also different.i need to display the code, enter time. enter out, and parking charge. i have a problem with the processor method.
View Replies View RelatedSo I wrote a method that simply calculates the sum of all integers between 1 and a given integer n. The method works fine however, as n gets big the solution will have time and space problems. Some I'm just curious if there is a better method than my iterative one that would produce a better Big O value.
public static int sum(int n)
{
int total = 0;
for (int i = 1; i <=n; i++)
total += i;
return total;
}
I would like to change the precent from *1.17 (17%) to calc of precent like this :
3% + 5% + 5$
For example :
The resault is 10$ - i want to get :
10$ +3%(0.3$) + 0.5% (0.51$) + 5$ = 15.81$
How i change this line to this calc
if(results[i].getSite()=='Xxx'&&XPrice==0)
{
XPrice =(results[i].getPrice() *1.17);
}
}
Write a program called ComputePi to compute the value of pi using the following series expansion. you have to decide on the termination criterion used in the computation(such as number of terms used or the magnitude of an additional term). Is this series suitable for compute pi?
PI=4*(1-(1/3)+(1/5)-(1/7)+(1/9)-(1/11)+(1/13)-(1/15)+.......)