I have a database networked with about 8 users. We have been having a problem recently with a specific table. Occasionally, when a user opens a specific form based on this table the entire form is whitened out. When I open the database there is no major curruption, but then when I check the specific table I always find one record with "#Error" shown in every field. I cannot delete the record (invalid argument), so I compact & repair the database and the bad record changes all fields to "##########". Then I can delete the record and all is fine.
Any thoughts on what can cause this kind of error ?
Im new to asp and access and have been having this problem for serveral weeks.
Every couple of days, all the asp pages on my site that communicate with the database start having 500 internal errors. i turned off the "Show friendly error messages" and one page gave me this specific error:
Microsoft JET Database Engine error '80004005'
Unspecified error
/admin/submitlogin.asp, line 8
I have tried a million things and have no idea why this is happening. Im not sure what other information i should post in order to see the problem. Any help would be greatly appreciated. Thank you,
Private Sub NextApplication_Click() On Error GoTo Err_NextApplication_Click DoCmd.GoToRecord , , acNext
Exit_NextApplication_Click: Exit Sub
Err_NextApplication_Click: If Err.Number = 2105 Then MsgBox "Cannot navigate to the next record. This is the last record." Else MsgBox Err.Description End If
Resume Exit_NextApplication_Click
End Sub
but even when this error occurs nothing is being properly handled the way i specified - any ideas ?
Does anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following: 1) Shows all records 2) Requery 3) ApplyFilter. The Where Condition for the filter is: Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
Okay, I'm kind of stumped here.I have a subform that has a button that sends a user to a "sibling" subform on another tab page, pass some information to ensure they are adding more details to the same records rather than creating two separate record.First time I programmed it, I got an error 3022 (keys cannot have duplicate values). I checked the query of the sibling subform and saw that the ID is from the one side table. I changed it so many table's foreign key is used. Second try, I got an error 3341 (there isn't a matching key in one side table).After some thinking, it also occured to me that I had set the query this way to allow addition of new record which wouldn't be possible if I had the query pulling the many side key, not the one side key.How do I get the subform to accept the ID that is being passed and create a new record using that ID?:confused:
Private Sub Consolidate_Click() Dim temp As Variant Excel.Application.Visible = True temp = Dir(CurrentProject.Path & "Inputs") Do While temp <> vbNullString
[Code] ....
From the second iteration its not picking the error.
Is it enough for error handling to code the on error property for each form? With enough I mean error handling which lets you resume the program.
Ontherwise I have to code (or call a procedure) for each coded event which i wouldn't prefer
For instance now I'm putting error handling in each event but would consider it more efficient if it can be placed once in each form Private Sub cmdReport_Click() On Error GoTo Err_cmdReport_Click
Not sure how to work in the '* ROLL *' into this SQL statement. The query statement works fine ... I have tried different quotation methods ( Not Like " & " ' * ROLL * & ' " & " ) AND .... )
sql = "SELECT DISTINCTROW Sum(CDbl([Scrap Factor])) AS SumOFScrap FROM [RT: Signpro1: Costs] LEFT JOIN [DT: InventoryExtend] ON [RT: Signpro1: Costs].[Part Number] = [DT: InventoryExtend].[Part#] GROUP BY [DT: InventoryExtend].CategoryID, [DT: InventoryExtend].Description, [forms]![signpro sign estima parameters]![combo14] HAVING ((([DT: InventoryExtend].CategoryID)=30) AND (([DT: InventoryExtend].Description) Not Like '* ROLL *') AND (([forms]![signpro sign estima parameters]![combo14])=1));"
hi guys i was wondering if you can help me this is my code: i have a main form with this code, this form contains a subform linked by the All_PricingID
Set rst = CurrentDb.OpenRecordset("tblAll_Pricing") 'main table ' adding data to the table rst.AddNew ' Main table rst!All_PricingID = Me.txtPricingID 'Main table pk rst!MainContract_ID = Me.cmbMainContract 'combo box in parent form rst!ItemNumber = Me.txtItem 'Main form text rst.Update
'sub Table Set rst2 = CurrentDb.OpenRecordset("tblPricing") 'sub table For varItem = 0 To Me.lstsubContracts.ListCount - 1 'this is a list in the main form '--- loop through all the items in the list box and create a new row in the subform for each subcontract in the listbox lstSubcontracts. rst2.AddNew rst2!ID = Me.All_PricingID 'sub table foreign key rst2!SubContractID = Me.lstsubContracts.Column(0, varItem) 'sub table rst2.Update Next varItem '--- close the tables rst.Close rst2.Close Set rst = Nothing Set rst2 = Nothing
the subform appears correctly with the rows i wanted added but i need the user to be able to edit a column in the subform for the rows just created (my form is on datasheet view). but everytime i move to cursor into the subform, i can't even scroll up and down.
i keep getting an error that says :
The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. (Error 3022)
but when i check my tables tblAll_Pricing and tblPricing , everything is inserted correctly according to my recorset above, do you know why this is happening? and why i am not able to edit my subform. my subform allowsedits and additions.
hi, I am new to this forum and to MS Acess. i am not a software engineer or in the field of software. I had to learn as much as i could about MS Acess because of a project i worked on. I have a standalone MSacess database and one of the forms is giving me trouble when I try to enter a new record
The form is called frm_fragrances and has information about a fragrance. the frm_fragrances has 4 fields in it and a sub form. the sub form has details about the fragrance
In a new record when I enter the 4 fields and attemt to go to the subform which has details about this fragrance I face this error.
an unexpected error haas occurred @2465: application defined or object defined error.
additional information Active form:<frm_fragrances> Active control:<txt_VendorName> Previous control:<frm_fragrances>@Please call the developer for further instructions
I have looked in the FAQ and on this forum for help on error 2465 and cannot find anything to help me. I can work with forms to an extent but cannot write too much code.
I would really appreciate some help in this matter Thank you
I'm from Vietnam and my English is bad. In my database, I have only a table named tblEmployees, which contains these following fields: Employee_ID (data type: text), Name (text), Salary (number) and Allowance (number). I build a form bound to this table. In the footer of this form, I have a textbox control named txtSumSalary that contains the expression: =Sum([Salary]). Everythings is OK. But when I build an another textbox named txtSumAllowance that contains the expression: =Sum([Allowancess]) (I misspelled this field intentionally), the result are error #error in both textbox controls. I don't understand why the textbox txtSumAllowance wrong, the textbox txtSumSalary is wrong too. Help me!!! Thanks a lot!
Hi. The following message appears when an append query is run in one of my databases "Error No:6; Description: Overflow". I've never seen it before, can't find it in Help - nor anywhere else on the net. All assistance greatly appreciated!
I have the following code as error handling in a form that gives me Run-time Error 438 "Object doesnt support this property or method" with "Msgbox..." highlighted... Code:'Error Handling On Error GoTo cmd_icp_catcode_Click_Err'and later in the code' Exitcmd_icp_catcode_Click_Exit: Exit Sub' Error notificationcmd_icp_catcode_Click_Err: MsgBox "An unexpected error hass occurred." _ & vbCrLf & "Procedure: cmd_icp_save_Click" _ & vbCrLf & "Error Number: " & Err.Number _ & vbCrLf & "Error Descricption:" & Err.Descricption _ , vbCritical, "Error" Resume cmd_icp_catcode_Click_Exit I can provide any more info that you need... I am just surprised because i have used the same code on several forms before and this has never happened!
I'm getting the following error when I try to switch to design view. Also I can't close the database: :( "You can't switch to a different view at this time. Code was executing when you tried to switch views. If you are debugging code, you must end the debugging operation before switching views."
Let's say we have a table in which one of the fields is Date. Now let's say we want to create a simple report from that table, but the user has to pick the date interval. So, the report will have to display records only from X date to Y date. We create then a form called Report with 2 fields for the user to input the X date and the Y date to create the interval. Then we make a query from that table, and on the criteria of Date, we put the following expression:
Between [Forms]![Report]![DateX] And [Forms]![Report]![DateY]
Well, that's what I've always done when I want to create a report based on a date interval input by the user and it always worked.
But now I've got a problem. Instead of making a query, I made a crosstab query from the table, to make the report easier to read. And again, on the date criteria I put the same expression, but it won't work on the crosstab query. I always get this error message:
"The Microsoft Jet database engine does not recognize '[Forms]![Report]![DateX]' as a valid field name or expression."
Why does this expression work on a regular query but not on a crosstab query?
Also, any ideas on how to create this report on the date interval provided by the user and using the crosstab query?
i just created a audit trail in my DB... however upon update and saving my changes... i get an error msg "13 - Type mismatch"... help pls... thankew in advance...
When I try to import an excel file into my access 2000 database, I get the following error message "an error occurred when trying to import... the file was not imported
I have three tables that are joined and I wanted to create a query that would return all records from one of the tables and only those matching from the other table.
I used Access properties window that does that; however, when I try to execute the query, it prints this message:
'The SQL statement could not be executed because it contains ambiguous outer joins. To force one the joins to be performed first, create a seperate query that performs the first join and then include that query in your SQL statement.'
This is my query:
SELECT tblSite.Site_No, tblPhase.Phase_No, tblSite.Name, tblHouse.House_ID, tblHouse.Plot_no, tblHouse.House_No, tblHouse.House_Address, tblHouse.House_P_Code, tblHouse.House_Type, tblHouse.Gross_Floor_Area, tblHouse.No_Of_Apartments, tblHouse.Number_Of_Bedrooms, tblHouse.House_Width, tblHouse.House_Depth, tblHouse.Garage, tblHouse.Phone, tblHouse.Electricity_Meter_Reading, tblHouse.Gas_Meter_Reading, tblHouse.Water_Meter_Reading, tblHouse.Customer_Handbook_Completed, tblHouse.Anticipated_Councial_Tax_Band, tblHouse.Missives, tblHouse.House_Price FROM tblSite INNER JOIN (tblPhase RIGHT JOIN tblHouse ON tblPhase.Phase_No = tblHouse.Phase_No) ON tblSite.Site_No = tblPhase.Site_No;
I can't get it to work and I will appreciate any help please.
I have a company database written in Access 2003. Recently every time I try to program something or change something in it I get:
The report name "MonthlyStock" you entered in either the property sheet or macro is misspelled or refers to a report that doesn't exist.
I had a report named MonthlyStock a few weeks ago but it was deleted, in the form that called the report the reference to it was deleted as well. I've searched the database and there's no record in any of the code of any reference to this report.
I think it might be to do with tools/options/general/Name AutoCorrect.
I had this turned on for a month or so (can't remember why). I've now turned it off but I'm still getting the above message every time I try to do anything at all in the database.
Please help this is a company database and this error is causing chaos.
Hi, Just got a new PC here, and now when I try and run a query I have in my database I get this error. I never got it with my old PC, and not sure how to fix it?
When I try to create a new record and write something in one of the fields in a form, this error comes up: "You can't assing a value to this object". I don't understand what's wrong. I have included a picture of the full message. I believe I don't have any of the things listed in the msg wrong.
