Hello every one, it is great to find a place like this.
Please I need help. When I print a form from Access 2000, all the fields on the printed form show #Error, eventhough in the screen the fields show information.
Can somebody help me????
Thank you
Hi all,
I am in the UK and the company i work for moved to Budapest and so did my access database and is now on their server. Today a user in Budapest has come with a problem (see attachment). I really don't understand what has happened here...all the user is doing is clicking on a button, which has a hyperlink to another form, no printing involved at all. One of their colleagues in Budapest can run the report with no problems, do you think the problem is most likely to do with their computer settings...thanks for any responses.
Out IT department updated to SP2 this weekend and about half of my reports are no longer working. I cannot view, print or go into design mode. The error I am receiving is this:
There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable.
As soon as I change my default printer to a different one everything works normally. After talking to our IT department I received the helpful reply:
"Not at this time . This would take a lot of research to see why some reports print vs this one that will not."
After about three minutes of checking all of the affected reports are pointing to one printer. I found a way to manually fix an individual report by opening it up with a new printer set as default, saving the report and then changing the default back to the original printer. The problem is volume, this appears to be affecting about 50 or so reports.
It seems like a driver or network issue, these are network printers, but I do no have the access rights to try and fix this.
Any thoughts?
I am getting an error message when printing a 2 part report. It does not appear until I have already printed the first part and I am ready to print the second. I have 6 users and all seem to experience intermittently with the exception of 1 who it is constant. The message is as follows;
"There isn't enough memory to update the display. Close unneeded programs and try again."I have tried deleting the registry "KEY_ CURRENT_ USER SoftwareMicrosoftVBA" with no avail and have installed all available updates from MS.
I have recently changed computers from a WindowsNT to and XP. When using the NT machine, I am able to print my Access report. However, when I hook up the XP machine and request a report from one specific database, I get the following message....this message also comes up if I try to open print preview or page setup.
"There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable."
I don't think it is a printer error as the error is occurring in this one database. I have successfully printed a test page and can open up other Access databases and print. I also tried converting the database to the 2002 format....but that did not make a difference either. There must be a setting in the database that is causing the error.....
Does anyone have any suggestions???
I am receiving the following error when printing different reports to several different printers in Access 2007: "The section width is greater than the page width, and there are no items in the additional space, so some pages may be blank. For example, the report width may be wider than the page width." According to my co-workers this issue began immediately following the upgrade to version 2007 from 2003.
View 1 Replies View RelatedIs there a way to print out the field names in a table? Not the data, just the field names.
Thanks,
Jeff
I have a table that contains a lot of different information regarding to mailing.
There are columns for Name, Address, Address2, Address 3, City, State, Zip, Country, Base Name, etc.
Some units will only required parts of the above information. I'm using the Name as an identifier in the DB only and Address is the beginning of content that I want to use.
My issue stems out of the fact that the City, State, and Country are not always required but the Base Name, may be used in lieu of the City.
I was looking at making checkboxes next to each of the columns on the form on the field and then using those checkboxes somehow to create a report for Mailing Labels.
I'm just not sure how to set this up.
I have a copy of the back-end that gets a search key error 3709 on two records. In other words, I can duplicate the problem.
The interesting part is that I can update any other field on both these records and save the record, but when I try to change two specific fields, I get a Search Key Error and have to ESC out to continue (basically UNDO the change). Both fields are text fields with lengths of 7 characters and 255 characters, and both are COMBO Boxes on the form.
I tried to focus on the form think there was an issue in the code. I can definitely TRAP the 3709 error on the ON ERROR event on the form using "if dataerr = 3709", but then I tried something even simplier.
I went directly to the table and to each of the records. Again I can update any other field in the record but these two specific fields. When I try to change either of them and move to another record, you get a Search Key Error 3709.
By going to the table record directly I'm as low level as I can get. There are no validation rules on either field at the database level. If it was truly CORRUPT would it let me update any of the other fields on either of these records? One is an empid (not a primary key but is indexed with duplicates okay and not required), and one is status code (not a primary key but is indexed with duplicates okay and not required) so they're no critical fields, but something is keeping them from CHANGING.
Just tried something else; deleted the INDEXES on both the fields. Now it works! I am completely confused now because it really wasn't a corrupt record, but the indexes are causing the problem. Do I need to update the indexes somehow when the users selects a new empid or status code?
I was having trouble just setting each report with a particular print method - for some reason they just kept forgetting their individual settings and resorting to default on the machine.
This meant reports were printing on the wrong paper, or the wrong size paper, the wrong orientation and some times refusing to print if it couldn't find the paper (which is useful in runtime as it doesn't display error messages)
So I used Reports(rpt).printer properties (I forgot where I found this) to hard code the printer properties into each print command... this meant I had to use another function to insert the variables.
So all I had to do was say:
Code:
PrintMe("Invoice","InvoiceID",iID)
and a report would print to exactly how I wanted... but it's just too slow!
See attached for full code, I have a niggling feeling it may be the function: PrinterOK, to make sure the printer exists or not.
Code:
Function PrinterOK(sPrinterName As String) As Boolean
Dim MyPrinter As Printer
PrinterOK = False
For Each MyPrinter In Printers
If MyPrinter.DeviceName = sPrinterName Then
PrinterOK = True
Exit Function
End If
Next
End Function
I know it's the printing code, because if I stop the printing and just preview then it shows up almost instantly.
i have a search form with a sub form displaying the results, how can i send the results to a report to print out or just print the results?:confused:
View 5 Replies View RelatedI have a form with multiple subforms. When I hit print selected record I get a blank sheet of paper. What could be set to not allow the data or the background of the form to print?
If I just print the subform out by itsself it works good. However when I have the main form open then try to print I get blank pages.
I am sure someone changed a fairly small setting, but I do not know what has been changed. Thanks.
:eek: When I go to print the form, it repeats the detail section over and over. Instead of being one page, it is 1414. How can I fix this problem? Thanks
View 4 Replies View RelatedHi
I'm pretty new to all of this. I've set up a simple database. I have a form in it for inputting information and then there is a command button on the bottom which prints out a report I've created with the information on it. This is all working great except it prints evey record and I only want the current record printed out.
I've tried the help and it goes into detail about OpenReport and PrintOut in macros. I have no idea what a macro is or what to do with it.
Can anybody please help me and give me step by step instructions as to how to print out only the current record in the report from the command button.
Your help is greatly appreciated:)
I have a form (entry screen to enter data) I then created a report in the layout I need for my order form. I want to creat a button that a user can press and it will print the current record to the report (order form layout)
Here is my current code for the print button on the form page:
Private Sub btnPrtOrderFrm_Click()
On Error GoTo Err_btnPrtOrderFrm_Click
Dim stDocName As String
stDocName = "rptOrders2"
DoCmd.OpenReport stDocName, acNormal
Exit_btnPrtOrderFrm_Click:
Exit Sub
Err_btnPrtOrderFrm_Click:
MsgBox Err.Description
Resume Exit_btnPrtOrderFrm_Click
End Sub
The only problem is when I tell it to print if I am on record number 2 on the form, it prints both record 1 and record 2. I only want the current record i am in to print. Any ideas much appreciated
Dean
Hello all- New here and working with a database for my boss. I did not create this rather am modifying it. I have a table (vehs) that contains information for three different departments regarding their vehicles. This database also has a form that prints (when clicked once) all of this data to the local printer. I need to make three sub forms to print similarly but just by department number (in other words only department 1's vehicle data) I'm not too big an access guru so if I need to supply any more data please let me know
Thanks,
John
I had made my own database for my own business.
I am trying to print a report from a form. Once i enter an order detail i finish off by printing a letter. At the moment we are doing this via a query by entering the order id.
I want to automate this so for the form record i am in i want a button to print a report for that record only.
I know this can be done as i rember doing this in college but i cant get my head round it at the moment.
Please help
After having designed a series of forms, I have just been told that users would like to occasionally print the data.
On testing this, it seems that the data does not print onto 1 page.
Are there any settings to fit data to 1 page wide only?
Aternatively, is there a better way of doing this? Perhaps by using a report or something like that?
The form has a whole load of calculated fields (calculated control boxes with expressions) so would I run into any problems doing it ths way ?
Thanks.
Having trouble printing after I performed a filter. Have a subform with continuous forms that I put various filters on..., however when printing, all the records print and not just what was filtered...Is there a way around this. Basically, I would like to be able to print out only the filtered records in my form view.
Max
I created a form that opens to a blank form. I also have a print button on the form. I want to be able to print the blank form, but nothing happens unless the primary key has a value in it. Is there a way to print just a blank form? I have been working at this problem for a few weeks. Please help!
View 1 Replies View RelatedHow do you setup the form to default print to a legal size paper?
View 3 Replies View RelatedI have a bound form that I created. I want to be able to print a blank form. When I click on my print button, nothing happens. Also, when I click on the print icon, I get the following error:
PCL XL error
Subsystem: KERNEL
Error: IllegalStreamHeader
Operator: 0x0
Position: 0
Here is my code for the print button that I created:
Private Sub cmdPrint_Click()
On Error GoTo Err_cmdPrint_Click
DoCmd.PrintOut , Me.CurrentRecord, Me.CurrentRecord
Exit_cmdPrint_Click:
Exit Sub
Err_cmdPrint_Click:
MsgBox Err.Description
Resume Exit_cmdPrint_Click
End Sub
Am I using the wrong code? I really need to be able to print a blank form!
I am looking for a way to only print the detail section (no header, no footer) using a print button on a form. it also needs to fit to 1 page. do i need code for this or is there a property that can be adjusted?
View 4 Replies View RelatedWe have 3 different sizes 1x3 2x3 4x6..I want to make 3 separate forms that have multiple sections that can be chosen.Upon Request I can Supply each separate Label with arrows to show what fields need to be changed for each Sales order.For the 1x3 Labels we Make:
1. ETL
- We change model #
- We Change if the Labels Says Dry Damp or Wet Listed.
2. MISC.
-One Plain Txt Box that can be edited in the center
For the 2x3 Labels:
1.Box Labels
-Customer
-Item
-Sales Order#
-Shipping Location
(For the Box Labels I was thinking I have a Table that holds all this data and all I would have to make is a Query then a form)
2.ETL
-Change Model
-Wet Damp or Dry
3.CSA
-Change Model
-Change the Wattage (3 Different Places)
-Wet Damp or Dry
4.MISC
-6 Text Boxes (From top to Bottom not side by side)
4x6 Labels:
1.HID Box Labels
-Item
-Watts
-Color
-Medium or Mogul Based
I am able to print a report of all records from a command button on a form with
DoCmd.OpenReport "General Input Info", acViewPreview
I can also print just the current form to the report with
DoCmd.OpenReport "General Input Info", acViewPreview [ID] = & [ID].
What I would like to do is print a report showing the current form and all the forms after that form. In other words, none of the records previous to the current form listed but do show the current record and all others after that as determined by the auto number ID field. I am able to filter by form in the ID field with >45 showing me all records with an ID of 46 and above but I want to be able simply print the report from the command button that is on the form.
Looking to print an access 2000 report on a 3 part - 9 1/2" x 4" carbon form. I'm using an Epson LQ-590 dot martrix printer. Does anyone know how I can set this up under the page setup of the report? I'm trying to print an access report I made with comapny and customer name to these 3 part carbon meter tickets. I'm really in a jam. Any help is gratly appreciated. Thanks....
View 2 Replies View Related