I have a 2 column, multiselect listbox which is bound to a table. The querry to populate it is this:
SELECT processus.id, processus.version FROM processus ORDER BY [cle_tri], [version];
Now my problem is that when I do this:
msgbox listbox.itemdata(1) , it gives me the value of the 'id' but I want the values of both 'id' and 'version' extracted from the listbox. How do I do that? Any Ideas??
I have created listbox with one column (contains one column only), now i would like to display all the characters of list item (want scroll bar to listbox).
How do i display all text of list item, I have already fixed Column Widths to max length (22";0.1"). However when scrolling to right, it is going to next blank column of list box, which is created only to change Column Widths property.
I'm sure I'm not being dim, but I really can't figure how to do this.
I have a list box with two columns. One column (bound) is a name, the other is a unique ID. I need to transfer both the Name and the ID to a second list box (again, two columns).
I can get it to do this with single selections, but not multiple ones, and this is what I need.
I use the following code in my application to select a particular column value in a list box..
myvalue = SearchResults_LB.Column(5, i)
In my computer the column count starts with 0. So, the above statement sets the myvalue to the 6th column. But when I install the same application on an other computer it sets myvalue to 5th column.
Looks like I need to set the base value of the listbox column property somewhere!
i create a project for salary company , i have a list box and have 6 columns & i have 1 textbox , i work with code and a listbox is the query know i need the value of textbox is equal with the column 1 from listbox how to do it ? like when i run form need to be enter the code when entered the code in listbox is equaled with the textbox .another question , in the list box i have one column it is about salary i want the total of salary.
I'm not familiar with listbox yet and i want to filter my form using it.
I have two separate listboxes which display "category" & "type" data from the same table.
Here is the situation i wanted for my listbox.
1. Select one data from "category" listbox. 2. Then it will automatically filter data from "type" listbox or it will list all related "type" data corresponding to "category" data. 3. Then select one data from "type" listbox and it will filter all related data on the form/sub-form.
Is it possible to do that way? Can i do it on multicolumn listbox instead of using 2 listbox?
I wonder how can I list all the column names for a given table using a single query? I know how to do it in SQL using system tables, but no idea how to do that in Access.
If I have a Query, and I want to list the sum of one of the columns of that query in another text box on a form, is this the correct way of doing it?
=Sum([Drivers Other Shifts].[Duration])
In this case, "Drivers Other Shifts" is the name of the Query, and "Duration" is the column header. When I try this I get #ERROR, so if it's just that something else is wrong, or that my expression is the wrong way to go about it...
why =listboxname.column(0) in the control source of a textbox will give me the value "#name?" ? I've used it successfully on another form..but for some reason its not working for me.
I am designing a contact database for a diocese and the contacts record form is divided into several tabs, some of which are hidden by default. One of the controls on the form is a listbox (lboRoles), where a user can add one or more roles to contacts. The listbox has a hidden column that defines the TabIndex for the assigned role, and my goal is to make the associated tab on the form that was previously hidden, to now be visible.
For example, if a contact is assigned the role "Committee Member" and the tabindex value for that role is 3, the form should make the hidden tab (where the page index is also 3) now visible.
I am new to Access and am trying to reduce a dataset I am working with to make it managable for Excel. I have three columns which have three unique parameters and one column with numberical content.
Column A Column B Column C Column D NJ Red Monday 10 NJ Red Tuesday 20 NJ Yellow Wednesday 30 NY Red Monday 35 NY Green Tuesday 40 NY Green Wednesday 60
I want to elimiate column C from the dataset, and sum column D for every unique combination of Column A & Column B. I have figured out how to reduce down the dataset to get a list of all unique combinations of Column A&B,what formula I can use in a query to sum column D on my table for every unique combination of column A&B. This is a simple SUMIF in excel, but my dataset is too large for excel.
I have a data base with names, email IDs, phone numbers of 5 types(example quality, security, IT,finance etc) of person from ten different project teams. I created a basic form for the end user to enter values and created fields for each of the person's name, email ID etc based on the personal type( liek quality, IT, finance etc) on each team. The background table contains records of almost 200 people now.
All of these people will be trained for one task and some will be trained for multiple tasks. I know how to make the combo box allow multiple values/selections but, i cannot list out all 200 personal names in the combobox's rowsource/value list. Is it possible to combine all different name fields and list out all personal(of one team), so that the end user can just select multiple names for that team who have been trained and so on. i need to set the rowsource of the combobox to the values of all personal from one team so the team leader can just go select who has been trained and who has not.
The following code works to change the column header name for a listbox in form view when the data source is a local table, but not when the data comes from a sharepoint list.
Code: sqlstatement = "SELECT ID, PONum as [PO Number], ActDate as [Date], VendorName as [Vendor Name], Service, BuildingNumber as [Building Number], ReservationDescription as [Description], POAmount as [Amount], QuoteType as [Type of Quote], Comments" & _ " FROM ActivityLog" & _ " WHERE (Activity = 'AcceptReservation') AND (PSCName = '" & Me.PSCCombo4.Column(0) & "')" & _ " ORDER BY ActDate;" 'MsgBox sqlstatement Me.EditPOListBox.RowSource = sqlstatement sqlstatement = ""
Also it appears that there is no such thing as a caption property for a sharepoint list column.
I am trying to run a simple update query to copy data from one column (Addrl1)to another column (Working_Addrl1) within the same file and I can't for the life of me figure it out. Then I need to repeat for addrl2 and addrl3 to working_addrl2 and working_addrl3.
In the organisation that I work for employees get paid every 2 weeks on a Saturday. So for this financial year the pay period end dates have been 08/07/2006, 22/07/2006, 05/08/2006 etc
I have a column in an Access table listing various dates. I want the next column to be populated with the next pay period end date after that date.
So if DATE is 05/07/2006 I want PAY PERIOD END to be 08/07/2006 and if DATE is 09/07/2006 I want PAY PERIOD END to be 22/07/2006 etc
I have created a cross tab to extract pipeline and sales for Q1 2014, Q2 2014, Q3 2014 & Q4 2014... the user can select the quater from a multivalued text box...
Now for the final output, have created another query which pull the above four quarter in each column from the cross tab...now the problem arises when i change the quarter to Q2 2014, Q3 2014, Q4 2014 & Q1 2014..it gives an error "Microsoft office Access database does not recognizes "Query name" as a valid field name or expression".
The error is because the second layer of query does not identifies Q1 2014.
How do i make access change the column automatically when the Q1 changes to Q2...
I need to input a string into a column named "EventType". The code should first check if the column "Agent Name" contains any strings. If there is none, it will input "IBM Director" into the EventType column.
Once it has looped through the agent names, the code will then loop through the Details column and input into EventTypes based on what is displayed within the string.
These are the codes that I am using to achieve this, however nothing is being input into the EventType column.
Code: Private Sub Command11_Click() Dim dbs As DAO.Database Dim rst As DAO.Recordset
Set dbs = CurrentDb Set rst = dbs.OpenRecordset("Final")
[Code] ....
I think the problem lies with the code that checks the agent name. When I removed it, it managed to populate the EventType column based on the details. But I still need to find out how to check the agent name too.
i have a columns as 1. contactname, 2. firstname 3. lastname 4. email and in this columns some emails are not matching with the contactname or some time firstname or some time lastname so i need the to find out the un matched contacts from the database.
im wanting to reference a value of a dropdown which is already serving a function - the dopdown already has it's bound set to 3 but i want this new function to refercne the second column-
im tyring:
"Tutor = '" & Me.ComboStaff.Value(2) & "'"
which isn't working- how do i reference the second column of a dropdown if its bound to its third?