5 Minutes Interval
Apr 20, 2006
I have a query that shows a list from GPS software (car fleet management), unfortunately the software is not capable of doing a decent reports thus I'm trying to use its data and do it myself.
The table structure is as follow:
Car, Date, Time, Position.
The time interval I have now is 1 minute (short time format), I don't need it so detailed, that's why I was thinking to limit this into 5 minutes interval.
Is it possible?
Thanks for any suggestions.
View Replies
ADVERTISEMENT
Jun 12, 2013
Basically I have a table setup where Time Fields are stored. What I need to do is in a Query, have the difference of two Time Fields calculated, and then displayed on a Report. Here's what I have so far...
Table
- Start Time
- End Time
Query
Difference Time: DateDiff("n",[Start Time],[End Time])
All that works fine and shows up on the report, except for the fact that the time is showed in straight minutes, so for a difference of 1:30 minutes, it just shows 90 minutes. I need to make it so that on the report in the Difference Time Text Box, it's showed as 1:30 instead of 90.
I tried putting the following in the Control Source for the Difference Time Text Box on the report, but it returns an error.
=[Difference Time] 60 & Format([Difference Time] Mod 60, ":00")
View 4 Replies
View Related
Jan 22, 2008
How can I convert hours and minutes to minutes as an Integer?
For example, convert 2:15 to 135.
Any help is greatly appreciated.
View 8 Replies
View Related
Feb 8, 2007
How would I find if 2 dates fall between 2 other dates?
For example:
This would evaluate to True
StartDate 02/08/2007
EndDate 02/11/2007
StartTestDate 02/09/2007
EndTestDate 02/10/2007
This would also evaluate to true
StartDate 02/08/2007
EndDate 02/11/2007
StartTestDate 02/07/2007
EndTestDate 02/12/2007
This would evaluate to false
StartDate 02/08/2007
EndDate 02/09/2007
StartTestDate 02/10/2007
EndTestDate 02/11/2007
View 5 Replies
View Related
Feb 20, 2014
Let's say I have a StartDate: 02/02/2014 10:00 and EndDate: 01/30/2014 15:00
Is it possible to have this result in a query?
View 12 Replies
View Related
Oct 2, 2014
In a table, i have a field called operating draft (ships). I would like to be able to put an interval of data in this field, for example between 3 meters and 6meters. Indeed, for few ships the draft is flexible.
What kind of data type should i select and how can I set up an interval data.
View 1 Replies
View Related
May 24, 2014
I need to show the interval between dates. The dates are all held in the same field.
A/CDate
52601-Mar-14
52601-Feb-14
52601-Jan-14
View 5 Replies
View Related
Jan 13, 2013
How to create a date interval using combo box?
For example, i have a receipt form consisting of receipt date from 1/1/2012 to 31/06/2012.
But I want to view the receipt form to just show the date from 1/3/2012 (can be changed) onwards or 1/4/2012(can be changed) onwards.
View 2 Replies
View Related
Sep 2, 2006
Hi!
I'm currently facing a wierd problem, and I really hope you can help me!
I have a query called "fsRapportSalgsoverblik2" which contains a list of all sales made from a company. I want to export that list to excel, which is no problem at all... But when I try to set a date interval, so that only the sales made in a certain period is exported, I get errors. I've tried to implement the interval-limitation in two different ways:
1) Inserting "WHERE date BETWEEN "field A in form" AND "field B in form" in the query from which the data is exported (when using the data-view to view the query output i can see that it works perfectly).
2) Inserting "WHERE date BETWEEN "field A in form" AND "field B in form" in the OnClick-code of the "export to Excel" button, where the export-code is written. So instead of saying:
Set rst = CurrentDb.OpenRecordset("SELECT * FROM fsRapportSalgsoverblik2;")
I change it to:
Set rst = CurrentDb.OpenRecordset("SELECT * FROM fsRapportSalgsoverblik2 WHERE date BETWEEN "field A in form" AND "field B in form";")
But no matter which solution I choose, I get the error: "Too few parametres. At least two was expected..." (free translation from danish version of Access). I really don't get it. When exporting to Excel without a date-interval, it works perfectly. But when inserting a date interval, it doesn't work, no matter how I do it....
Please help!!
// JR
View 3 Replies
View Related
Sep 9, 2014
I have a range say 12.03 to 13.11.
I need to generate all numbers falling within this range with 0.01 increment.
(This increment is based on the numbers; if the numbers have 2 decimals, it should be 0.01. If the numbers have 3 decimals, the increment should be 0.001. Both the numbers will have the same number of decimals)
The answer is: 12.03, 12.04, 12.05, etc. etc. till 13.10, 13.11.
Is there a way we can do it in MS Access ?
View 14 Replies
View Related
Jul 5, 2005
HI all,
I am still new in Access databases :o
I have a table with 'General Date' column. So I have to create query wich extracts records between Last record (via Date field) and 'for example' 10 days before. But Last record in Date column may differ from Now().
When this is done I have create calculations with extracted records using agregate functions.
I'm trying to use Last function for Criteria putting it into Date field and substracting with -10 (for 10 days) but it doesn't work.
Please help! :confused:
View 7 Replies
View Related
Dec 20, 2013
I am trying to figure out how to take a table of timestamps and activity duration and break it into intervals, where it groups the duration into the time spent in each 15 minute interval. I have included a sample of the data and output. Is there any way to pull this in Access (or SQL)?
Raw Data
EmployeeActivityTimeStampStartTimeStampEndTotalDuration
Doe,JohnSomeActivity12/16/13 9:06:02 AM12/16/13 9:57:14 AM0:51:12
Smith,JaneOtherActivity12/16/13 9:22:15 AM12/16/13 10:06:55 AM0:44:40
Query to break out the total duration time in to the 15 minute interval it fell into
EmployeeActivityIntervalIntervalDuration
Doe,JohnSomeActivity12/16/13 9:00:00 AM0:08:58
Doe,JohnSomeActivity12/16/13 9:15:00 AM0:15:00
Doe,JohnSomeActivity12/16/13 9:30:00 AM0:15:00
Doe,JohnSomeActivity12/16/13 9:45:00 AM0:12:14
Smith,JaneOtherActivity12/16/13 9:15:00 AM0:07:45
Smith,JaneOtherActivity12/16/13 9:30:00 AM0:15:00
Smith,JaneOtherActivity12/16/13 9:45:00 AM0:15:00
Smith,JaneOtherActivity12/16/13 10:00:00 AM0:06:55
View 2 Replies
View Related
Aug 12, 2015
How can I put a field in my query, with all data hourly incremented between 01 January 2015 to 31 December 2015.
View 5 Replies
View Related
Sep 30, 2014
I've got a single table with multiple fields, three of which are a date field ('DDate'), a time field ('TimeET') and a unique identifying field ('Unique Call Key'). I'm attempting to write a query in the QBE that will allow me to count the number of instances of 'UniqueCallKey' for each hourly time interval (7:00:00 AM - 7:59:59 AM, 8:00:00 AM - 8:59:59 AM, 9:00:00 - 9:59:59 AM, etc) for any selected date range (BETWEEN 'DDate'(1) AND 'DDate'(2)). When I try to simply use the Count function on 'UniqueCallKey' as an Expression and 'TimeET' with 'Like '7:*AM' as a Where criteria then do the same with another instance of 'UniqueCallKey' and 'Like 8:*AM' as the criteria for a second Where criteria for 'TimeET' the query returns an empty set. What I'm trying to accomplish would be a column of dates, a second column that counts the number of instances of 'UniqueCallKey' at the 7AM interval for each date in column 1, a third column that counts the number of instances of 'UniqueCallKey' at the 8AM interval for each date in column 1, etc to a final column for counts at 7PM.
View 3 Replies
View Related
Feb 15, 2012
How to create a table that has a recurring entry, based on a start date and a nominal interval period of e.g. one calendar month?
Is it possible to have these entries applied automatically each time so that they appear, as required, when the table is opened?
For example, for the entry of regular payments due per month.
View 3 Replies
View Related
Mar 1, 2007
Hello all,
This forum has been a lifesaver in the past and I hope someone can help me now.
I have a Contacts form that is used to input all the client's information. (name, date of birth, address etc).
I want to be able to force the person entering the data to not be allowed to tab to the 2nd text box (or any other text box on the page) unless in the first text box data has been entered (the first text box is client name)
However, I also need to be able to overide this if the person entering the data clicks on a "Cancel" button (another button on the page which closes the form).
Is this possible and if it is any help would be greatly appreciated!
Thank you in advance,
Rob
View 14 Replies
View Related
Oct 12, 2004
I have time sheets from the past I need to enter but have found that some years the time punch minutes are given as if an hour equals 100 minutes not 60. Other years the minutes are given correctly. How do I format this field so that if I type 3.75 it will convert to 3.45 hours? Will I have to add another field to enter this and then convert to my field where hours and minutes are correctly entered? :confused:
View 2 Replies
View Related
Dec 6, 2004
Here's one that I'm having difficulty on. I know just enough about code to completely confuse myself, so if you answer this, please explain in detail. I have a training database, in which a portion of it stores the scores of events of a physical fitness test. Part of this test is a times 3 mile run. I need to calculate a point value for the submitted time, but here's my dilema...If I use the time/date feature it accepts the input as hh:mm, and will not let a time of more than 24 minutes be entered, since it sees this as 2400, or midnight in military time. I need the data to be inputed as mm:ss, and I have another text box that accepts this info and converts it to a point value. I would appreciate any help you could provide. Thanks in advance.
Scott
View 3 Replies
View Related
Dec 28, 2006
I have a column which contains "text digit text" as "AAA 222 BBB". The numbers of letters or digits can vary.
I need to SELECT the column which contains digits in a specific interval. For Example I have
"DFS 673 JKK"
"A 3454 LJLJ"
"SD 854 JKLJD"
I need to SELECT the column which contains 600 < Digit < 700 the result of the query in this case would be "DFS 673 JKK" because 673 is between 600 and 700.
Thanx for any clue or suggestion...
View 1 Replies
View Related
Apr 20, 2006
Hi,
If I have a time like 22:00 and I want to add lets say 300 minutes to it; so it now shows 03:00 how do I do this? I can do it in Excel alright with the TIME function but cannot find a similar feature in Access
Liam
View 1 Replies
View Related
Nov 16, 2005
Can anyone tell me if there is a way of displaying a number, which represents the number of minutes of elapsed time, into the format days:hours:minutes elsapsed?
For instance the number (in minutes) 1530 would display as = 01:01:30. 1 day, 1 hour & 30 minutes of elapsed time.
Any help would be appreciated.
Paul.
View 2 Replies
View Related
Feb 3, 2006
I would like to calculate the time difference between two dates, what ive got so far is
TimeSpent: DateDiff("n",[datein],[dateout])
This calculates the minutes between two dates, Can you format this so that it calculates hours. minutes for example 124 minutes would be 2.04?
I thought using "h/n" might work but it hasnt
thanks
View 1 Replies
View Related
Jan 31, 2007
I am truly stumped. I have a query that sometimes takes less than 1 second to run, and sometimes takes close to 5 minutes. I am making NO changes to the query. I first thought it was a network issue, so I moved the whole db, both front-end and back-end, offline. No change. So I thought maybe it was a linked table issue, so I moved all the tables used by the query to the front end. No change. Every once in a while, the query runs at lightning speed, less than 1 second. Most of the time, it takes 3-4 minutes, or longer.
Here's the SQL:
SELECT PCAInternalPareto1a.row, PCAInternalPareto1a.column, PCAInternalPareto1a.Noun, PCAInternalPareto1a.Rev, PCAInternalPareto1a.InspPoint, PCAInternalPareto1a.cell, PCAInternalPareto1a.DefectType, CLng(nz([firstofTruncatedOpSeq],0)) AS ZOpseq, Sum(PCAInternalPareto1a.DefectQty) AS SumOfDefectQty, PCAInternalPareto1a.poo, PCAInternalPareto1a.repcode
FROM PCAInternalPareto1a LEFT JOIN BOMOutRefDesOnly ON (PCAInternalPareto1a.RefDes = BOMOutRefDesOnly.RefDesOnly) AND (PCAInternalPareto1a.partno = BOMOutRefDesOnly.PCAItemNo)
WHERE (((nz([FirstOfComponentItemNo],0)) Like "*"))
GROUP BY PCAInternalPareto1a.row, PCAInternalPareto1a.column, PCAInternalPareto1a.Noun, PCAInternalPareto1a.Rev, PCAInternalPareto1a.InspPoint, PCAInternalPareto1a.cell, PCAInternalPareto1a.DefectType, CLng(nz([firstofTruncatedOpSeq],0)), PCAInternalPareto1a.poo, PCAInternalPareto1a.repcode;
PCAINternalPareto1a is itself a query, which always runs fast. BOMOutRefDesOnly is a table with about 84,000 records. I have indexes on the joined fields.
I know the where statement looks useless but I have my reasons for doing it this way. I tried deleting the where statement and it ran really fast. Then I re-added it, and it still ran really fast. THen slow again. I can't find any relationship between anything I've tried and the speed of the query!!!! What's going on??????
Access 2002
View 7 Replies
View Related
May 19, 2005
I have some machine data to display showing running speeds. This is logged every minute when the machine is running but not when stopped.
how do I display a bar graph with a timescale along the bottom of minutes showing gaps when the mchine is down. :confused:
View 2 Replies
View Related
Aug 30, 2006
I am what you would consider an extreme newcommer to Access. I used to use FileMaker as my database app. I have a bunch of data in an excel workbook that now needs to be converted to DB and I want to use Access.
I have the form set up and I have a bunch of time fields entered in minutes and seconds. They show up as 12:05:32 AM. I want this to display only as minutes and seconds (5:32) drop the hours and am. Is there a mask I can use or how would I approach this?
View 2 Replies
View Related
Mar 31, 2008
Hope some one can help I have a field with a time value in it in the format:
08:30 (this is a date/time field) what I would like to do is convert this value in a query to minutes.
Ie.
08:30 (8 hours 30 minutes) convertes to 510 minutes. any pointers. Thanks.
View 1 Replies
View Related
