A Query That Returns Values That Total Less Than A Required Amount?
Dec 10, 2007
Hi
Can anyone suggest a method for doing what the title asks. I basically have a single table with several fields. One of the fields is the length of music tracks in seconds. What i want to do is to set criteria so that when a query is run the records to not add up to more than 900 seconds.
1stly) Is this "do-able" using queries or do i need to start implementing sql statements which i have limited experience of?
2ndly) Can anyone recommend a suitable method to do so provided it isn't very complex.
My knowledge of Access is Intermediate.
Kind regards
View Replies
ADVERTISEMENT
Oct 29, 2007
I'm trying to execute a query which is looking at data from 2 different tables and most of the data fields in the tables are the same. For instance table 1 has Dept, Res, Period_date, & Available Hrs and table 2 has Dept, Res, Period_date, Project & Forecast Hrs. The results I'm looking for are as follows:
Dept Res Period_date Project Forecast Hrs Available Hrs
11 A 11-02-07 123 XXXXX
11 A 11-02-07 456 XXXXX
11 A 11-02-07 789 XXXXX
11 A 11-02-07 012 XXXXX
11 A 11-02-07 XXXXX
But the "Available Hours" are duplicated in the preceeding 4 rows.
Thanks for any advice on this.
View 5 Replies
View Related
Jul 27, 2014
I have a query which returns values from a table, as follows:
Service_Date
Supervisor
EExpect
EAchieve
OExpect
OAchieve
IntLossOP
IntLossEN
This is used for a report for a 28-day period (the query selecting the Start Date and the End Date), and the intention is to show the information grouped by Supervisor, showing the information for as many days as they worked.However, I would like to have the overall 28-day averages of the six fields EExpect thru to IntLossEN shown underneath the detail for each individual. I know I could do this in Access Totals in the page footer if the report was confined to one supervisor, but with up to 20 supervisors I am unsure how to get these totals after the detail for each?
I would also like to have this summary information for each individual presented on a separate page at the end of the report (almost like a league table, if you like), so there is a single page that shows the data for each supervisor in comparison to all their colleagues.
View 7 Replies
View Related
Aug 30, 2014
My problems is that when I use below setup without the "Notes" tabel, they query works fine, and returns the amount of spares and time used by a single WBS ID. (Customer). But when I add another tabel and link it together. Its returns load of lines with the same data - it looks like its copying its self, over and over again.
View 4 Replies
View Related
Feb 27, 2007
Hello All,
I need to create a derived attributes (total hours left, total hours used).
In order for the calculation I have days_allocated in the employee table (this is converted into hours by multiplying this by 24).
How can I create a field in a query that works out the amount of hours used and left?
Here is a typical holiday record (screenshot of my query that I am trying to do)
http://img3.freeimagehosting.net/uploads/th.8af9f3cd25.jpg (http://img3.freeimagehosting.net/image.php?8af9f3cd25.jpg)
Can someone please help me create a formula.
Thanks
View 13 Replies
View Related
Mar 18, 2014
I've got to do the following query in Access:
"This query should prompt the user to enter two dates and than calculate the total amount paid for all invoices in the Amount field between those two dates (inclusive)."
Query is based on table Invoices.
I have created the query and dates part works fine. However,when I run Sum for the Amount field, instead of total amount query displays amount of each invoice between those dates. How to get just Total (amount of each invoice added up)?
View 3 Replies
View Related
Mar 16, 2013
We have a form where we enter various amounts and a box where these are added together to calculate taxes. This amount is shown on the screen but we need to save this total amount in the table where it can be used in other calculations in other forms
The control in the box looks like this:
=[registration fee]+[membership fee]+[fee per term]+[additional classes fee]+[costume]+[books]-[discount]+[applicable gst]+[uniform fee]
How can I get the result of this formula saved in another table field?
View 4 Replies
View Related
Dec 18, 2014
I have two numbers, i need to calculate how much percentage of one is the other. E.g
num_1 = 100
num_2 = 10
percent = 10%
Users enter a dollar amount (retainer) and my code should calculate the percent of the total proposal amount.
Actual Code
Private Sub cmdSubmit_Click()
Dim intProposalTotal As Double 'if i use interger i get "overflow" error
intProposalTotal = Nz(DLookup("ProposalTotal", "qryPropsalTotalForRetainer", "proposal_id=" & Me.proposal_id), 0)
[Code] .....
billing_retainer_percent is formatted to Percent with 0 decimals. In the actual table Type - Number, Format - Percent, Field Size - Single. What i get is 100% instead of 10%.
View 4 Replies
View Related
Dec 5, 2014
I have a table of hours that have been worked by employees for each day of the week
[moh] (Monday's hours),[tuh],[weh],[thh],[frh],[sah],[suh]
data eg (this is how I would like it to be inputted into the table)
7:24:00,7:24:00,7:24:00,7:24:00,7:22:00,0:00:00,0: 00:00
This equates to 36:58:00
I have tried
Total Hours: [moh]+[tuh]+[weh]+[thh]+[frh]+[sah]+[suh]
but I am struggling to get what I want in the right format.
How to record the initial data or a formula to format the end result.
Excel just does it !!!!!
View 1 Replies
View Related
Nov 20, 2014
I am trying to get the main form to display a total Amount for all records in Purchase order details but the control displays Error:
I have a Form called frmPurchaseOrder with a sub-form sbfrmPurchaseOrderDetails
sbfrmPurchaseOrderDetails takes item details from a table based on what is selected in the combo box then fills out four additional fields in the same sub-form.
SELECT tblItemListDetails.ItemID, tblItemListDetails.ItemName, tblItemListDetails.ItemSize, tblItemListDetails.ItemUnit, tblItemListDetails.ItemUnitCost, tblItemListDetails.ItemBrand FROM tblItemListDetails WHERE (((tblItemListDetails.Supplier)=[Forms]![frmPurchaseOrders]![SupplierCombo]));
Private Sub cmbItemName_Change()
Me.txtSize.Value = Me.cmbItemName.Column(2)
[Code] ....
View 5 Replies
View Related
Feb 18, 2014
I am trying to build a form that can show the total from the amount that the report generate.
View 3 Replies
View Related
Sep 25, 2013
I have a subform in columns that has a list of invoices bound together by the site number on the form there is a Expense code that runs 51 to 95.
On another tab I want to add all the invoices for a expense code together and display the total amount
Below is an example of invoices
IDSite CodeInvoice DatePOInvoiceContractorInvoice AmountExpense Code
10289S20/09/2013 346603410Dj Commercial Cleaning Ltd 25.2362A
20289S28/09/2013 346061141Platinum Landscapes 240.0055A
30289S03/09/2013 353112021Clean And Green 167.0063A
40289S02/08/2013 353112015Clean And Green 174.0063A
50289S19/08/2013 111115271Southern Electric 189.5679A
60289S19/08/2013 346061121Platinum Landscapes 240.0055A
70289S02/06/2013 353112009Clean And Green 160.0063A
80289S02/05/2013 353112003Clean And Green 181.0063A
I want it to display on another tab
51 General Expenses £452.36
55 Gardens £1523.65
and so on
whats the best way to do this?
View 2 Replies
View Related
Jul 9, 2013
I am trying to count how many of the "same" and "differences", as well as calculate the percentages of the number of "same" over the total amount. To clarify, I work at a nursing home, and I need to calculate the number of people who were admitted to our facility and then to the hospital for the same diagnosis, and a different diagnosis. Then, out of the total number of people who were admitted to the hospital from our facility, I need to calculate how many of those people had the same diagnosis or a different diagnosis.
Also, I need to categorize these diagnosis by each type of diagnosis.
View 14 Replies
View Related
Jan 13, 2015
I have the following code:
Code:
Dim rs As DAO.Recordset
Dim db As Database
Dim strSQL As String
Set db = CurrentDb
strSQL = "SELECT DISTINCT tbl_contract_lev.ContractID FROM (tbl_leverancier_gegevens INNER JOIN
[Code] ....
The result of the query is a list fo unique values but by including the "count" function in SQL seems not te be working in combination with "DISTINCT"...
View 5 Replies
View Related
Apr 24, 2006
Check the attached mdb file.
Can't figure out why the query returns -1 instead of the letters that are stored in the table :confused:
Many thanks!
Steff
View 2 Replies
View Related
Dec 18, 2013
I'm creating a form where people can choose something in the first combo box [ComboBox1] which results in the second combo box [ComboBox2] displaying only the items that are associated with the first combo box [ComboBox1].
In my second combo box I have the amount of "empty lines" that equals with the items associated with the first combo box. But there is nothing displaying. No words.
View 8 Replies
View Related
Jun 28, 2013
I am making a report off of a query. The report is returning values from a Option Group. 1=Yes, 2=No and 3=N/A. The report returns the numeric values and I want the value labels instead. So, I created a column in the query for exp1 which looks like the following:
=IIF([VSArrive]=1,"Yes",IIF([VSArrive]=2,"No","N/A"))
What the report returns is #Error.
View 6 Replies
View Related
Oct 22, 2013
On a form I have the following field:
Name: PaymentsMade
Control Source: =DLookUp("SumOfPrePaymentValue","qryInvoicePrepaym entSum","InvoiceId = " & [InvoiceId])
In the form's footer I have the unbound text control:
Name: SumOfPaymentsMade
Control Source: =Sum([PaymentsMade])
SumOfPaymentsMade returns #Error
How do I get it to return the sum of PaymentsMade?
View 4 Replies
View Related
Mar 16, 2013
In Access 2003 I have a form, at the footer of which I want to put some summary information. One of which is a count of the number of purchases over £500. I have tried many variations after searching the posts on this site but the only one which does not return me an error of some kind with the expression is
=IIf([Bought For]>"500",Count([Bought For]),0)
where 'Bought For is the reports listing of the purchase prices in a given date range when opening the report, but the value returned in my test is '0' when it should be '2' as the test file has two purchases of over £500.
View 5 Replies
View Related
Jul 21, 2015
I have One table(and designed form from it) in which i have recording the daily transactions(it is like a daily book). Daily transactions took place like Purchase of items of Amount 45, sale=70, sold on account=100 etc.
What problem i am facing is: I would like to Add Cash In Hand amount and would like to show it on my form. When day end I would like to move remaining cash In Hand on separate column of that date. The next day i would like to take the previous Remaining Cash in Hand as Cash In Hand at Start for next date and so on.
View 2 Replies
View Related
Jul 17, 2014
I am trying to make a report in which I can see the amount of money that I have to pay weekly to an employee. To explain myself clearer, I have different rates for each employee. For example:
NameNormalPayRateVacationPayRateSickPayRateOvertimePayRateStandbyPayRate
John Smith$15$10$15$30$8
Ken Jonson$10$8$10$20$8
I am doing this in a query. So what I want to be able to do is, for example, take 4 hours that the employee worked at NormalPayRate and multiply it. But if tomorrow the employee worked at a different rate, for example 3 hours overtime, I want those 3 hours multiplied by OvertimePayRate.
The way I saw it on my Google researches, is that they have only one rate and the amount will be [SumOfHours]*[Rate]. But how can I tell my query to skip, for example, one rate because the employee didn't work at that rate that day. So I can have different amount for the different rates.
By the way, entering the information I can divide at what rate the employee worked x day. So if the employee work 6 hours at regular, and later on 4 hours at standby, I have those information separated in my table.
Results that I am getting: I can easily get the amount in money multiplying the whole hours by a rate, so my result in my report will be multiplied by the same rate.
I am using Access 2013 ...
View 2 Replies
View Related
Jul 23, 2015
I am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
View 9 Replies
View Related
Apr 5, 2006
Hi. In my query I have a Name column, day column (With a drop down box for the 7 days) and 10 task columns showing hours worked on each task.
I need to try and find a way automatically calculate to show the total hours worked for each specific day for each person and show each total value on a report and in a form.
Any Ideas?????
View 1 Replies
View Related
Oct 18, 2006
Anyone know how to get the total value from a field in a list box please?
http://johnviki.com/images/listbox.jpg
I have text boxes on the main form above the list box & can't work out how to get the totals in the text boxes above like I've typed them in the sample above
Any ideas?
Thanks
View 9 Replies
View Related
Nov 2, 2013
Placing the grouping total values on the bottom of the last page of this report, such as below?
Common . . . . . . 44.55%
Convertable Bond .14.55 %
Preferred . . . . . . .40.91%
View 1 Replies
View Related
Oct 23, 2013
I have a quick (hopefully) query about adding up consecutive values to get a running total.
Currently I have the following
ID Value
1 0
2 5
3 2
4 0
5 1
6 30
7 2
etc...
I am looking for a way to get a running total up to the point of a 0 then restarting. e.g.
ID Value Running total
1 0 0
2 5 5
3 2 7
4 0 0
5 1 1
6 30 31
7 2 33
View 12 Replies
View Related
