Having grown weary of the speed related issues and numerous bugs - I have decided to Uninstall 2007 / reinstall 2003. Now, howver I find that the uninstall fails and then rollsback.... what a pain in the a!
JPG attached shows the dialog that results when I try to remove. Does anyone have any ideas why this is happening - the folder in question does exist and I am System Administrator with full privelegs for write access etc. on the machine!
Why does this (poor excuse for an improvement) software persist in plagueing my life...!
I really would rather not have to reformat the drive to remove all traces of Office 2007.
I have an Access 2007 application where don't work the link table manager.
I also try to complete reinstall the Office 2007 and also I register the Accwiz.dll in the office folder (regsvr32.exe Accwiz.dll) but the module still does not work.
I use Access 2003 and Access developer extensions for packaging the software(operating system is Windows 2000)..everytime I upgrade my software, the users need to uninstall it from their computer and then install my new version.. Is it possible to automate this process so that users click a button on the application and uninstall and install is taken care?
I know I can run a batch file using shell command...but can I create a bat file to uninstall and install? Now, users goto add/remove programs and remove their current version before they install new version.
I am building a DB in 2007 yet our department has not yet fully upgraded and won't be until the end of the year. Currently we are running Access 2003, will this prohibit the users that have yet to upgrade from utilizing the DB?
Sorry if this has been touched on before, but I have searched high and low and could find nothing.
On trying to import an Excel 2007 file into Access 2007 I get the following:
1) Choose "External Data," Import, Exce 2) Select small file in MS Excel 2007 format. 3) Click on Import the source data into a new table ... 4) Choose OK
Immediately get "Microsoft Office Access has stopped working. Windows is checking for a solution to the problem..." This message never resolves, so I have to click 'Cancel'.
Then I get "Microsoft Office Access is trying to recover your information..." I have to click "Cancel" here as well and then kill MS Access in Task Manager.
Event Viewer gives following message, which is of no help: "ID: 2, Application Name: Microsoft Office Access, Application Version: 12.0.6211.1000, Microsoft Office Version: 12.0.6215.1000. This session lasted 710 seconds with 120 seconds of active time. This session ended with a crash."
Trying to import a small Excel 2003 file leads the same result. The same happens with a CSV file.
I have uninstalled and reinstalled Office 2007 as well. I am using Vista Ultimate.
I installed Office Enterprise 2007. Then I installed DEveloper Exrtensions, then Access Runtime 2007. All appear to have installed OK - they appear in Program and Features. Instructions on runtime packaging tell me that a Developer option should appear in the resulting drop-down when I click the Office button (top-left round thing) when I have a d/b open in Access. It's not there! I have un-installed and re-installed the extensions and the runtime - still nothing! Help! I do have Runtime 2002 (XP) on the same PC, is that relevant?
I have installed Microsoft Access 2003 and Microsoft Access 2003 Developer Extensions. I can create Access application by using the Package Wizard. But after I upgrade from Microsoft Access 2003 to Microsoft Access 2007. I can't use the Package Wizard.
Attached is a screenshot of the relationships in a database I built a couple of years ago. It's worked absolutely fine in Access 2003 and currently has over 18,000 customers with associated information in it.
However, when I open the database in Access 2007 the performance is awful. All the forms are very slow to respond when tabbing between form elements. I've experimented by reducing the number of form elements calling on related data on a given page and whilst this improves performance it reduces usability - something I don't want to compromise on especially since Access 2007 should be able to cope with this.
My next question is therefore whether I've got the most efficient underlying table design and I can't see any other way of doing it than my current method so I'd be grateful for any feedback or advice anyone has.
Background Info: I developed our main department's Access 2003 split database which is on a server for 15+ Users. I've now been given Access 2007 for development -- Users still have 2003. There are also 2 other smaller databases that are not split (.mdb).
Problem: In the split database, I've saved the Application .mdb as 2003, relinked and made a new .mde. But the Users still cannot open the database. (I did this in a copy until I figure out the nuances with 2007.) The 2 other unsplit databases can be saved as 2003 version and Users can open OK.
I'm grateful for any suggestions on working with Access 2007. I've been trying to tackle the ribbon which is a whole other question.
Having a problem here after installing 2007. All my previously created databases work fine in 2007 (after clicking the enable, which is a pain,but don't know any other way) When I return to 2002 and try to open the databases I get different errors all something like this on....... "The expression On Open you entered as the event property setting produced the following error: Object or class does not support the set of events. Whats up here?????I have found a site here...http://allenbrowne.com/bug-17.htmlMentions this problem,but refers to Vista..... Does the same apply to XP? And which is the best fix?
I have an Access 2000/2003 database which opens up and displays correctly in Access 2007, but when I go to use the File>Print command, or for that matter any of the other pull down menu's nothing happens?
Has anyone else experienced thisproblem, or does anyone know what I am doing wrong?
I have created a database in Access 2007 that now works well, and one that I'm quite proud off. However, I can easily convert it to an Access 2000 format as can anyone else here, but when I load it up there is a major problem.
I have used the tab control in my main form and that has three tabs on it. However, it's positioned correctly in Access 2007 it's not positioned correctly in Access 2000 as I have to move the tab control down a bit, but that would seem fine. So I lowered the tab control form and changed my form layout slightly, but even then the tab control over all over the Access 2000 form whenever I interact with the tabs - most bizzare.
I have an application on access that export the data to word.
I did a query and the data export to word
my code is: Dim db, rst Dim strSQL As String
Set db = CurrentDb 'קישור ופתיחת וורד, והצגתו בצורה מוסרת Dim objWord 'As Word.Application 'Set word as an application and make it invisible Set objWord = CreateObject("Word.Application") objWord.Visible = False 'True is visible
'שם המסמך objWord.Documents.Add ("C:doc3.doc")
strSQL = Me.strSQL Set rst = db.OpenRecordset(strSQL) rst.MoveFirst Dim strString As String strString = "" Do While Not rst.EOF 'ID--------------------------------- strString = strString & rst!nameID & vbTab & vbTab & "|" 'name------------------------------- If Not IsNull(rst!fName) Then strString = strString & rst!fName & vbTab & vbTab & "|" End If 'lName--------------------------------- If Not IsNull(rst!lName) Then strString = strString & rst!lName & vbTab & vbTab & "|" End If rst.MoveNext strString = strString & vbCrLf Loop objWord.ActiveDocument.Bookmarks("aaa").Select objWord.Selection.Text = strString objWord.Visible = True my question:
I want to export the data to a table in word. I attach the file (to work good put the file "doc3.doc" to "c:/") how can I do it? thanks :)
The company are using Access 97 as the front-end to a SQL2000 database. Tables are updated, queries run and forms used. They are moving to SQL2005 but not considering updgrading Access 97. Will the current queries, forms etc still work? Thanks.
I have packaged my Access 2000 program using SageKey. When I open the installed runtime version of the database, and click on a menu button that performs a databse backup, there is no error, yet the file does not copy (note that I am using a function that utilises apiCopyFile). It does not do this in the full Access version where I have developed the program. Does anyone have any idea why it is doing this? And any suggestions to how I could fix this or change my approach?
I had copied my MS Access database that I made from work and tried to open it from my home to work. And it said it is only Read_Only. Why is that? Can I change this from my home PC or Can I work with this only from work?
Another thing, then I tried to create another database and I could only do this by creating table from design view and entering data. But I was not able to create it using the table wizard. When I click on the table wizard, nothing happens.
My work's MS Access is 2000 professional version I think, and my home MS Access is 2000l.
I recently heard that Access 2007 ( part of MS Office 2007) can be purchased as a stand alone program. This sort of confirms that : look at pricing breakdown on : http://techrepublic.com.com/5254-6257-0.html?forumID=99&threadID=174062&messageID=1961442&id=3053951
I have downloaded Access 2007 trial, but I don't know how to use some of its features. When I try to open any of my databases saved as A2000, it displays a security message. "Security Warning: Certain content in the database has been disabled"
Hi, I have downloaded the access 2007 trial. Installed and registered it with the trial code. However when I try to install any of the free sample dbs from MS including the northwind db, Access crashes!! I was going to purchase the full version of office, but wanted to test access first. If anyone knows a solution, or can email the northwind 2007 db it would be appreciated.Many ThanksP.S. Screen dump of error is included.
I read this article from Allen Browne http://allenbrowne.com/Access2007.html#Bugs Has anyone had any problems with 2007, data, tables, etc. Our company would like to install, but after reading this, just second guessing myself. We have not yet installed the SP1. The company is gang ho about running with 2007.
I would like to hear your oppinion about new MS Access Jet db engine
I've been working with MS Access still 10 years, since version 2.0. I used to use MS Accesss for companies size of 10 pc users, and for any bigger company, I used MS Access as front end and MS SQL Server as back-end.
I bought recently MS Office 2007, with MS Access 2007. Before that, I read in one computer journal, that new, Access db Engine is completely made from scratch. And that this new engine is so good, that there are no needs to work with , for example MS SQL 2005 express. Also, I read, that during development phase of MS OFfice 2007, Microsoft development teams SQL Server and MS Access in Redmond, USA, fought among themselves, about is there need for Jet db engine, or not.
Engineers working in MS SQL development team, made a pressure on Microsoft board, to remove Jet engine from Access, as you can take MS SQL express for free, but on the other hand, MS Access dev. team, replied that new Jet is robust at least as MS SQL express 2005.
So, my question is: what do you think about it, is new Jet db engine, really so good and robust in MS ACcess 2007 ?